My Man! You just saved me a couple hundred bucks! I have an Ingersol Rand twin tanks so the breakdown was a little different but the concept was the same. I took off the old gaskets and used fire and smoke caulk instead. Put it back together and Boom! I am back from 0 pressure to 100% Thank you so much.
@louiszkaen3911 Жыл бұрын
You should have tested it for it to work let us see
@bevanoneill94482 жыл бұрын
Please next time u remove a gasket use a small hammer amd gently tap it loose
@pauloribeiro4234 Жыл бұрын
i have the same machine diferent colour , my problem is i can get the eletric motor to start, change to a bigger cap but it turn 2 time than turn off. That cutting switch will arm.
@Andkep Жыл бұрын
Suprised it didnt glue the piston to the head with how much glue went on
@garvielloken39294 ай бұрын
Nooice!
@JoeRocket-sf6qs2 жыл бұрын
Ya didn't show it was not charging then when you "fixed" it you didn't show it was actually fixed and filling the tank.
@ZutiDIY2 жыл бұрын
To this day im still using it,thanks for watching.
@joebarry1974 Жыл бұрын
All that.... never showed it working.... It could be in the skip for all we know....
@charlessampa3770 Жыл бұрын
Very little air pressure coming from the hose
@kuttmowf Жыл бұрын
Well maybe it didn't work. He didn't show that part
@ZutiDIY Жыл бұрын
It worked and still working without any moisture coming out of the hose.
@TheMan-si4iu Жыл бұрын
@@ZutiDIY Of course it is, you just ran out of memory before you could show it working.
@johnysilver18532 жыл бұрын
My compressor starts working and builds pressure up to 150psi but sometimes during work it will not start and won't keep tank charged. Sometimes it turns on only for a few seconds then goes quiet. Sometimes I hears something that it wants to start like air going somewhere through the pipe for a 2 second and then quiets and stays like that. Fails to keep up pressure in tank when I use it. Pressure goes low as 50psi but compressor doesn't start. Then I had to open drain valve to release remaining air pressure in the tank. Disconnect it from AC power for few minutes and it starts working again build up to 150psi again. I don't hear any air leaks. What could be wrong?
@ZutiDIY2 жыл бұрын
I think you got faulty air pressure control switch.
@johnysilver18532 жыл бұрын
@@ZutiDIY Thank you. Its Husky 20 gal 150psi need to check if it can be fixed
@ZutiDIY2 жыл бұрын
@@johnysilver1853 i m not sure,but you can try to clean its points.
@georgerobson8753 Жыл бұрын
@@ZutiDIY I agree it does sound like the pressure switch snd they are available on Amazon if Im not mistaken
@ZutiDIY Жыл бұрын
@@georgerobson8753 yes,they are available on Amazon.