How to Fix AlphaRex Hyperflash Issue

  Рет қаралды 22,817

Sunshine State Vikings

Sunshine State Vikings

Күн бұрын

Пікірлер: 107
@derekrickson7314
@derekrickson7314 2 жыл бұрын
Second gen Tacoma owner. Love these AlphaRex headlights. Hyper-flash issue drove me nuts. Reached out to TacomaBeast and they sent me a pair of resisters. Watched this video and the issue was resolved in less than 20 minutes. Thanks for a quick and easy fix Zach!
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
No problem! Thanks for leaving a comment like yours, it lets us know we are doing a good job and helps motivate us to keep trying to make useful content like that! ✌️😃 enjoy the lights we still love ours.
@basselmourra6603
@basselmourra6603 2 жыл бұрын
Hey man I have the same issue and I need the resistor. How can I order them from Tacoma beast?
@TheUtahMan
@TheUtahMan Жыл бұрын
Saw this video too late. I had the same issue, contacted alpha Rex about it and they never got back to me. The hyper flash drove me so nuts I stopped using my turn signals all together because it was a constant reminder that my $1000 headlights weren’t working properly lol. Sold the truck a few weeks ago. Thanks for sharing this. Now I won’t hesitate buying alpharex again, loved them.
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
Oh no! So sorry to hear about your experience, your story is one of the many reasons we try to make content like this. We simply want to help others with information we have learned ourselves!
@rudycornelius5119
@rudycornelius5119 Жыл бұрын
Yo im doing the same thing your doing! But i still got the truck. Got mine from the retrofit guys and i ask if they can send me the resistors and they said its not going to fix it. But this guy is doin it and it fix it! I dunno man.
@rudycornelius5119
@rudycornelius5119 Жыл бұрын
@@SunshineStateVikings can you help please.
@mvincent7704
@mvincent7704 3 ай бұрын
Thanks for the video, I just replaced mine on my 2010 Tacoma, and your video made it easy. Do you have any idea how long these resistors last?
@juniorsarmiento7292
@juniorsarmiento7292 16 күн бұрын
I had hyperflash happen months after I installed headlight/resistor in my Tundra. Do you think the resistors went out?
@joseg.5937
@joseg.5937 2 жыл бұрын
You would think that for $1200 the company would figure it out so you would have any issues.
@paint3ball
@paint3ball Жыл бұрын
Just installed mine and got the hyperflash issue on the drivers side. Waited 65 days to get them and then this. They are sick looking but this shouldn’t happen…
@BROKExx
@BROKExx Жыл бұрын
not to mention their customer service is fucking awful
@Coloradoboss
@Coloradoboss 28 күн бұрын
I asked alpharex if I could install resistors on my headlights for my Rav4 and they told me not to install resistors, this is interesting. I bought mine from a 3rd party vendor on ebay. I may be SOL. Thanks for the video though. Wish I saw it sooner.
@garrettschaible5865
@garrettschaible5865 2 жыл бұрын
very helpful, originally hooked up wires just to drls so had hyperflash at night. its fixed now 😊
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
Awesome, we are happy our video was able to help!
@compassandradio6261
@compassandradio6261 7 ай бұрын
What's cool is that your Tacoma already has faux vents next to its headlights. Now, they can actually be functional to keep your resistors cool.
@ryanfloberg5601
@ryanfloberg5601 Ай бұрын
Thank you, worked!
@zachgobonkers
@zachgobonkers 2 жыл бұрын
I just got the pros installed on mine which uses halogen low beams. I’m about to replace them with LED bulbs. Will this cause the hyper flash problem?
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
It should only be possible if the turn signals are being changed out to LED. If it’s just the low beam it I don’t believe it will affect it.
@isaiahiniguez5631
@isaiahiniguez5631 9 ай бұрын
What LED bulbs did you end up swapping with??
@azballerguy
@azballerguy Жыл бұрын
I have a 11 Tacoma with the factory DRL and the 12-15 front conversion. I already have the alpha Rex tails. Curious to see if I will have hyper flashing or not when I get my headlights
@scorpionyted3283
@scorpionyted3283 6 ай бұрын
Did you have the issue or they already fix it?!!!
@carystarke8000
@carystarke8000 7 ай бұрын
I would Kill for that Hair ! It either turns loose or turns grey , and mine has done both ..... Thanks for this tip that I probably will encounter after I install mine on my 2007 X-Runner .
@dvannasing
@dvannasing 5 ай бұрын
Hi there, I am recently just installed these onto my 2013 Tacoma, and I don't get my DRL's or turnsignals. Everything else seems to run properly. I am have some contact with Alpharex, but nothing has been resolved yet. Do you have any advice? Feeling bummed they are not working properly.
@AlRoque-hy5td
@AlRoque-hy5td 8 ай бұрын
I have the same hyper flash issues. I contacted the seller who pointed me to alphare. I contacted alpharex but having difficulties obtaining support/ just spinning my wheels. Can you advise who to contact to obtain the resistor to fix my hyperflash issues?
@christianbarcinas694
@christianbarcinas694 11 ай бұрын
Can you please send me the link to where you bought the resistor? I’m having the same issue.
@ramiroramirez8535
@ramiroramirez8535 Жыл бұрын
Intael everything as you show in the video, but now it doesn't start, my tacoma is a 2008 model, do you have a solution, thank you
@ironhorseoverland7353
@ironhorseoverland7353 2 ай бұрын
You going to be at Expo East?
@reeseotero6619
@reeseotero6619 Жыл бұрын
Thank you for this video brotha.
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
Glad you found this video valuable 😊
@jaimebakal4253
@jaimebakal4253 2 жыл бұрын
What year is your Tacoma? I just installed the same headlights to my 2015 Tacoma Limited and I didn't have the hyper flashing turn signal, because I have a led bulb on my rear turn signal which I have installed the resistors for that reason 😅 maybe since they are powered by the same line that's why I didn't have that issue when I installed my Alpharex NOVA Series.
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
Loki is a 2014 TRD Off-road, we’ve been getting a lot of mixed reports of others either getting hyper flash or not with a variety of situations. Some have had it just installing the tail lights and some have had no issues at all with the same headlights and taillights installed just like us. From what we gather and based off talks with AlphaRex customer support it’s just random as to wether or not it will happen between the product and the truck itself. But either way it’s awesome to hear about your experience and that you didn’t have to hassle with the resistors for your install, it wasn’t bad to do just another step and added stuff is all. Thanks for sharing!
@Th33Oth3rGuy
@Th33Oth3rGuy Жыл бұрын
On your 2015 tacoma can u turn off the DRL with your switch or does it constantly stay on ?
@jaimebakal4253
@jaimebakal4253 Жыл бұрын
@@Th33Oth3rGuy unfortunately the DRL switch is disabled so the surrounding light is constantly on. Other than that it’s all good 👍 I love my alpha rex light 😀
@Th33Oth3rGuy
@Th33Oth3rGuy Жыл бұрын
For your Tacoma when you turn the switch to the off position does your DRL turn off or constantly stay on? Because mine stays on
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
The AlphaRex DRLs stay on all the time. We just resolved this issue by installing an electronics manager and will have a video come out in the next few weeks that will go into it a little further!
@marvinj1972
@marvinj1972 Жыл бұрын
Great video. I currently have a similar problem on my F-150 Alpha Rex send me a pair of harnesses and supposedly should solve the issue, but it didn't work, yet they sent me a new set of headlights, but the issue persists. Do you think I have the same problem you had?!
@carystarke8000
@carystarke8000 7 ай бұрын
I sure hope that I have that already when I bought the Headlights , it comes with 1 DRL Converter , and you buy a pair of Converter Harness kit . I'm guessing maybe of those 3 black boxes , 1 is a resistor >?
@craigpattison5762
@craigpattison5762 3 жыл бұрын
Can you provide the part number of the provided resistors and confirm what their resistance is? I thought you said they were 100 ohm which sounds pretty high as I've heard others that had to install resistors on their LED headlights only needed 5 to 6 ohm resistors.
@SunshineStateVikings
@SunshineStateVikings 3 жыл бұрын
We are currently away from home but as soon as we get back we can confirm that for you. They are definitely 100 ohm from I remember. I also am not sure if they sell it. All we had to do was let them know we had the issue and they sent them out to us
@craigpattison5762
@craigpattison5762 2 жыл бұрын
@@SunshineStateVikings hi, any luck finding out the specific model/ohm of resistors you used? Thx!
@josemercado8496
@josemercado8496 Жыл бұрын
Does one resistor fix the headlight and taillight? Or do you need a resistor for the front and another for the back?
@delgado3033
@delgado3033 Жыл бұрын
It would fix both bc that’s the only reason your taillight is hyper flashing bc the front one is doing it as soon as you fix the front one it should control the back one
@johnlocus3096
@johnlocus3096 2 жыл бұрын
in my case, i had both alpharex headlights and tail lights, had hyperflash. They sent me resistors and told me to put them on the tail lights, problem fixed. so i guess adding the resistors on either or works fine 👍(this may or may not be right but I think if you have oem tail lights and you install alpharex headlights you wont have hyper flash issue because there is already resistors built onto the headlight)
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
That’s interesting, it really seems like hit or miss with this issue. Just recently talked to another individual asking about some other options he found to fix the problem as he wanted to be able to correct them during the initial install. had same situation as you, he installed both new AlphaRex headlights and tail lights however he ended up not even having the problem with either one. I’m sure this is why they don’t just send the resistors initially with the product, they likely only have some that experience the problem and have no way to tell which sets will experience it. Maybe it’s all situational.
@artoli7054
@artoli7054 2 жыл бұрын
Do you know what kind of resistors they sent you? How many watt and ohms?
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
@@artoli7054 they are un-branded but they are for sure 10 ohm resistors (one for each side)
@joseelizondo7535
@joseelizondo7535 2 жыл бұрын
Hey I have alpharex headlights and they have resistors already and the passenger side has hyperflash any tips to find the issue?
@alvarosolano6569
@alvarosolano6569 2 жыл бұрын
Great info 👍🏽
@taximaroa
@taximaroa Жыл бұрын
hello, the hyper flash happens on the driverside for me. Do i just tap it in the same wires you did but on the drivers side?
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
Yes, that is all that should need to happen. Just be sure to confirm that your wires your about to tap are the turn signal leads just like we showed in the video, you are merely adding resistance to that circuit so your computer thinks the incandescent bulb is still there. Hope this helps, and feel free to ask any other questions you might have!
@loganhopkins7133
@loganhopkins7133 8 ай бұрын
Having the same hyperflash issue, do you know what size resistor you used?
@scorpionyted3283
@scorpionyted3283 6 ай бұрын
Did you findout?
@miya7525
@miya7525 2 жыл бұрын
Is this only an older car thing? I have a 2023 4runner with this issue and I’m in the middle of communicating with Alpharex and they don’t think this is the issue
@josemrubio442
@josemrubio442 Жыл бұрын
Thx I needed this vid.
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
Glad you found it, and hope it helped!
@alfredopeliajr.9229
@alfredopeliajr.9229 2 жыл бұрын
I had the same issue, make sure all the prongs in the male end of the plugs are straight and not bent. My issue was one of the prongs were bent and not going into the female end correctly making the turn signal to hyperflash. I zoomed in to the video and it kinda looked like one of the prongs were bent
@joseelizondo7535
@joseelizondo7535 2 жыл бұрын
Do you mean that the harness is actually plugged in correctly? I'm having hyperflash when my turn signal is on but they already have resistors and it's only on the passenger turn signal
@alfredopeliajr.9229
@alfredopeliajr.9229 2 жыл бұрын
In my case, one of the metal prongs in the headlight plug was bent over, not going into the holes making the headlight hyperflash. Just look inside the plug and make sure all of the metal prongs go into the holes in the wiring correctly. I did not use a resistor.
@joseelizondo7535
@joseelizondo7535 2 жыл бұрын
@@alfredopeliajr.9229 ok I'll check that cause mine have already resistors attached to the headlights and only the passenger side will hyperflash when turn signal is on
@GoldenBoy0423
@GoldenBoy0423 10 ай бұрын
I just installed the resisters is not hyper flashing in the cab but the actual headlights are flashing the turn signal
@PlayCallOfDutyMW3
@PlayCallOfDutyMW3 Жыл бұрын
If you have LED turn signals on front and rear you can get rid of the resistors and replace your turn signal flasher relay with a LED specific one. More streamline, no worry of resistors burning up, bad connections, and lower voltage consumption. Just a different way of correcting hyper flash.
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
Thank you for probably the most explained version of the relay fix we have ever received. We will look into that for sure to help guide others with that info as well in the future!
@cameroneshleman4833
@cameroneshleman4833 Жыл бұрын
What size are the resistors, I can't find the alpha rex ones anywhere
@scorpionyted3283
@scorpionyted3283 6 ай бұрын
Did you find out??
@tanercomertoglu5236
@tanercomertoglu5236 2 жыл бұрын
Do your drl stay on after locking the truck?
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
For a short time yes, I believe the intention is to leave some light on the ground for walking away Convenience.
@kaomoua1998
@kaomoua1998 3 жыл бұрын
Does adding 1 resistor fix all hyperflash? Or they go individually to each one that has hyoerflash?
@SunshineStateVikings
@SunshineStateVikings 3 жыл бұрын
Each light will get its own resistor, it’s basically to look like the bulb for each side
@cheaterrico1652
@cheaterrico1652 Жыл бұрын
where do I exactly buy the resistors for my truck?
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
We recommend reaching out directly to AlphaRex!
@lingmorales7060
@lingmorales7060 2 жыл бұрын
i have the same problem with my lights what is that called to fix
@craigpattison5762
@craigpattison5762 3 жыл бұрын
Wouldn't replacing the flasher with an LED flasher be an easier fix for the hyper-flash?
@rockyhedding7117
@rockyhedding7117 2 жыл бұрын
It would normally, but the wiring in the later 2nd gens 2012-2015 is way different. If you change the relay the front light will not flash at all.
@justifiedbyfaith8971
@justifiedbyfaith8971 2 жыл бұрын
The 2nd gen with DRL's have an 18pin box that controls the flashing. It doesn't even use a standard type flasher relay.
@dannyblanco2471
@dannyblanco2471 Жыл бұрын
I have a problem with the driver side Don’t blink of all I have Alpharex in Tacoma 2013 You know how fix Thanks
@troygregory4127
@troygregory4127 Жыл бұрын
Did you get it fixed I have the same issue
@gaugeowen
@gaugeowen 11 ай бұрын
@@troygregory4127 I have the same issue. Did you ever find a fix? My right side still hyper flashes
@brandonchristie5494
@brandonchristie5494 Жыл бұрын
Was this only on passenger side for you as well?
@SunshineStateVikings
@SunshineStateVikings Жыл бұрын
No, both our driver side and passenger side lights were hyper flashing.
@stevepark1930
@stevepark1930 19 күн бұрын
my headlights came with a resistor but it only plugged into the drivers side harness, the pass harness had the same plug, (the yellow one in this video without a wire connected) but nothing to plug it into. my pass side blinker is the one that hyper flashes, only sometimes, like 50% of the time. you would think this would not be an issue at all at this point considering I bought the lights in 2024. WTF.
@farmermike9262
@farmermike9262 2 жыл бұрын
Thanks
@pinpin891
@pinpin891 3 жыл бұрын
I installed one in my 2014 it was plug and play for me only thing you have to make sure you do is do not install anything in the fuse box in the engine bay install like this guy did in the fuse box next to the steering wheel
@SunshineStateVikings
@SunshineStateVikings 3 жыл бұрын
We are happy it all went well for you!
@mlapl03
@mlapl03 2 жыл бұрын
Why not install in fuse box in engine bay?
@justifiedbyfaith8971
@justifiedbyfaith8971 2 жыл бұрын
@@mlapl03 because the fuse in the engine bay is tied to the evap system which momentarily turns on while the truck is off. You may see the lights come on during the night or odd times during the day. It also causes the DRL's to flicker during your engine start/crank which could potentially lower the life span of the LEDs.
@aharonvazquez3646
@aharonvazquez3646 Жыл бұрын
@@justifiedbyfaith8971 so would it just be better to not put that in or in some other place
@justifiedbyfaith8971
@justifiedbyfaith8971 Жыл бұрын
@@aharonvazquez3646 The Alpharex DRL and turn signals require the control box to function. You just want to run a wire from inside the cab to the engine bay instead of using the fuse tap inside the engine bay fuse box. Take note that you will need to cut the fuse tap and add on some wire to extend it. 1. Starting at the fuse tap, Cut off about 8" from the fuse tap and wire. 2. Solder an additional 3-4' of 16-18ga wire. 3. Plug the fuse tap into the fuse box inside the cab that is left of the steering wheel. 4. Run the new wire through the firewall. There are 2 grommets in the engine bay firewall that gives you access to the cabin. The top one has interior carpet trim that prevents you from just feeding the wire through. If you take a slim screw driver, you can shove it through. Tape the wire to the screw driver with electrical tape tightly and pull the screw driver back out. This will fish the wire into the engine bay for you. 5. Strip both ends of the old wire and the new wire and use a butt connector or male/female quick disconnects to connect the wires back. The fuse that you can tap into is the radio fuse.
@LesleeWooton
@LesleeWooton 5 ай бұрын
For some reason my blinkers don't work at all. High beam and low beam work fine. The rear stock blinkers work fine. I have emailed AlphaRex.
@mikedougherty9361
@mikedougherty9361 2 жыл бұрын
Did you ever find the part number to the resistor kit need for the headlights? Having the same issue with mine
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
I did! The package is actually a 2 piece set of 10 ohm resistors. The O in ohm is too close to the 10 so I read it as 100 ohm. They are in fact 10 OHM resistors. Part number listed on the package is just as follows AHL-LR-10OHM-2PC There is nothing listed physically on the actual resistors. If you have an alpha Rex product, I recommend giving them a call as I don’t think they have it on their site for sell. They will either send them to you for free or I think can send them for I think $15 if they weren’t the original seller to you. I hope this info finds you well and helps you fix your issue!
@craigpattison5762
@craigpattison5762 2 жыл бұрын
@@SunshineStateVikings I tried looking up that part number on Amazon and Google but didn't get any results. I've been told by someone that any resister will work, even 6 Ohm resisters.
@pinpin891
@pinpin891 3 жыл бұрын
I just got one of these today sounds like a headache to install
@saadibadran8593
@saadibadran8593 6 ай бұрын
Hey bro, can you send me the link for the resistors? I would like to get some too. thank you
@rtshrfgstws
@rtshrfgstws 5 күн бұрын
Why wouldn't they just include the resistors on vehicles they know this will happen to?
@estegueydijo....
@estegueydijo.... Жыл бұрын
how the heck should I be doing all that on a 800 bucks headlights 🤷‍♂ since they are so expensive then they need to do two versions.
@Redeyereaper8
@Redeyereaper8 2 жыл бұрын
Alpharex sent me resistors for my taillights but no instructions
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
It certainly is frustrating that they do that. Which is precisely why we made this video to help others navigate the installation. We hope the video helped you install them 👍
@mauiazn32
@mauiazn32 2 жыл бұрын
It totally sucks that There’s this “issue” with the headlights AND with the Tail lights as well.. Alpharex AND Tacomabeast should make sure the Resistors come WITH the products they sell…. I now need a pair of resistors and Tacomabeast is all out of stock .. so I have ordered some off of Amazon and will have to wire them in myself . 👎🏼
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
We totally agree it would make it easier if the resistors came with the product. Otherwise the lights are a solid product and we still love ours. Hopefully you get your issue resolved. We also recommend contacting AlphaRex directly about the issue.
@mauiazn32
@mauiazn32 2 жыл бұрын
I was able to install the resistors I got from Amazon in about 20mins.. was super easy and fast to do… but still having to drive around with my lights all twacked out for a week sucked.. but it is now fixed and working perfectly. 👍
@SunshineStateVikings
@SunshineStateVikings 2 жыл бұрын
@@mauiazn32 happy it all worked out 💪
@Pillo_90
@Pillo_90 Жыл бұрын
What was the link for the Amazon resistors
@derekrickson7314
@derekrickson7314 2 жыл бұрын
Second gen Tacoma owner. Love these AlphaRex headlights. Hyper-flash issue drove me nuts. Reached out to TacomaBeast and they sent me a pair of resisters. Watched this video and the issue was resolved in less than 20 minutes. Thanks for a quick and easy fix Zach!
@craigpattison5762
@craigpattison5762 2 жыл бұрын
Does it matter what resistance they are? Does 50watt/6ohm resistors fix the hyper flash?
AlphaRex Nova install 2015 Toyota Tacoma
16:51
Aperture Labs Sacramento
Рет қаралды 506
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН
Quando A Diferença De Altura É Muito Grande 😲😂
00:12
Mari Maria
Рет қаралды 45 МЛН
Quilt Challenge, No Skills, Just Luck#Funnyfamily #Partygames #Funny
00:32
Family Games Media
Рет қаралды 55 МЛН
Beat Ronaldo, Win $1,000,000
22:45
MrBeast
Рет қаралды 158 МЛН
Toyota Tacoma 100% Plug & Play MAJOR Audio Speaker Upgrade for $115
17:52
Your Tacoma Can Last FOREVER - The Ultimate Maintenance Guide
9:10
Team Oil Drop
Рет қаралды 413 М.
How to Aim and Align Your Headlights
8:34
Headlight Revolution
Рет қаралды 1,6 МЛН
BOLT Lock's BEST Products!
17:46
Kyle Kelly
Рет қаралды 65
2nd Gen Tacoma PERFECT DAILY | Rig Talk
17:29
TacomaBeast
Рет қаралды 166 М.
What Went Wrong?! Ford Lightning Engine Tear-Down
17:30
Dave's Auto Center
Рет қаралды 70 М.
The evil clown plays a prank on the angel
00:39
超人夫妇
Рет қаралды 53 МЛН