How To Fix Dirt Pit Bike Bogging | Upgrading Chinese Pit Bike Carb

  Рет қаралды 112,290

Aarons Enduro

Aarons Enduro

Күн бұрын

Пікірлер: 756
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Everything you'll need to make your Pitbike run better and faster Makuni Carborator (replica)- amzn.to/2AXlSIF Makuni Carborator (Genuine) - amzn.to/3g0injX UNI Carb filter - amzn.to/3cNzPpP UNI Carb FIlter OIL (YOU NEED THIS) - amzn.to/31eGaYX 16 tooth front sprocket - amzn.to/30trEMD
@christopherpuhl4359
@christopherpuhl4359 4 жыл бұрын
did u have to rejet at all..
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
I havent yet, but i still need more tunning
@christopherpuhl4359
@christopherpuhl4359 4 жыл бұрын
there is alot of contradicting information on these knock off mikuni carbs. some people are saying that the mikuni jets dont fit. do you happen to know which jets fit? keihin style?
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Because 99% of guys are running replicas and not genuine mikuni carb
@christopherpuhl4359
@christopherpuhl4359 4 жыл бұрын
im planning to run a knock off mikuni as well. I just wanna make sure i get the right jets before i start messing with it
@trittany2882
@trittany2882 3 жыл бұрын
Dude you are one of the best I’ve seen on KZbin at explaining this stuff for noobs like me. I subscribed a while ago but will be tuning in much more. Keep up these kinda videos and your channel should explode
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Thanks homie! No plan on slowing down!
@kw1nz33
@kw1nz33 3 ай бұрын
Hey man, thank you for making this video. I got my son the same exact dirtbike and carburetor. With your step-by-step instructions we were able to spend some time together and successfully do this project.
@AaronsEnduro
@AaronsEnduro 3 ай бұрын
Thats awesome! Happy to help!
@robwill5566
@robwill5566 4 жыл бұрын
Great job explaining and coaching people including myself to the process. Thank you
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Robert Licari very welcome!!
@p_kam7999
@p_kam7999 Жыл бұрын
This video is super helpful, with me u ring the same bike and getting the same carb it’s just amazing.
@AaronsEnduro
@AaronsEnduro Жыл бұрын
Glad you found it of use!!
@nahnotforme9819
@nahnotforme9819 Жыл бұрын
Thanks Aaron. Really enjoying this series buddy. Heck, I'm enjoying all your vids.😆 Brap on bro🤙
@AaronsEnduro
@AaronsEnduro Жыл бұрын
Thanks bro! Glad you’re enjoying! If you have any questions just ask!
@nahnotforme9819
@nahnotforme9819 Жыл бұрын
@@AaronsEnduro thanks 👍
@sleepyrasta420
@sleepyrasta420 Ай бұрын
Glad i found this video i got a new cheap Chinese carb off of eBay and i just cant get my bike to run it starts then a second later it cuts out I'm away to try some of the stuff in this video
@sleepyrasta420
@sleepyrasta420 Ай бұрын
It was the clip that goes onto the throttle needle it was in the wrong position
@AaronsEnduro
@AaronsEnduro Ай бұрын
Happy that you figured it out!
@sleepyrasta420
@sleepyrasta420 Ай бұрын
​@@AaronsEndurome too it was frustrating i spent the whole weekend trying to get it running, I'll be out later on ripping around
@rayball1675
@rayball1675 3 жыл бұрын
Just an fyi you should always shut the gas off and let the carb burn remaining fuel in the line. Doing this will extend carb life.
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
thats true yep
@kingquadking7005
@kingquadking7005 4 жыл бұрын
Great video, just a few things. Filter side, air adjustments are on the side of the carb at the filter, not underneath at the filter . Only the fuel screw will be located under at manifold side. Hose at the bottom of carb bowl is the overflow, for when your float stays stuck open so that you dont flood your engine.. BUT still very informative, hell yeah 🤘
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Thanks for more info
@kevinlepage123
@kevinlepage123 4 жыл бұрын
You have fun riding today Eric
@richardriffle9773
@richardriffle9773 4 жыл бұрын
Yeah I'm trying to figure out what you were figuring out on this video at high RPM all gears my engine want to cut out I've tried everything on the carburetor still trying to figure it out
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
thatd be your main jet being to small for your sea level
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
if you have already tried increasing fuel^^^
@richardriffle9773
@richardriffle9773 4 жыл бұрын
I'm in Indiana don't no what size is best
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
You need to take yours out to reference what a “size up” from that is
@richardriffle9773
@richardriffle9773 4 жыл бұрын
I have played with the needle I have not tried new spark plug that's my next thing
@TorryJL
@TorryJL 2 жыл бұрын
did you raising the clip fix your bog in 3rd and 4th? I'm having the same issue when in 3rd and fourth and snap the throttle it bogs for a bit and then catches up and takes off. My fuel/air screw is 2 turns out and my needle clip is on the highest notch. cheers
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
It did yeah, try adjusting your clip in the various settings and see which performs the best!
@DanielFreakinAwesome2
@DanielFreakinAwesome2 2 жыл бұрын
@@AaronsEnduro Yeah I wanted to know this too, so moving the clip up (making it leaner) fixed your issue?
@manoloholmes5973
@manoloholmes5973 4 жыл бұрын
I have a questioned on the gas and air flow screw you said close it all the way then give it 2 1/2 turns open??
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Correct! Within a half a turn in or out from there should be ideal fuel settings if you have the correct sized carb
@Abovedarim214
@Abovedarim214 Жыл бұрын
I'm having trouble taking off the stock "cap" on throttle collar. Where is the brass/copper pin that I must cut out? Thanks!!
@AaronsEnduro
@AaronsEnduro Жыл бұрын
its located on that stock cap
@jeffreymeyer8950
@jeffreymeyer8950 3 жыл бұрын
I was able to get needle nose pliers and remove the brass notch on the stock cap instead of cutting or drilling it out. Its a screw
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
nice work jeff.
@kyushka.
@kyushka. 3 жыл бұрын
Same
@spymaine89
@spymaine89 9 ай бұрын
great thanks i have that RFZ , BUT hurt my knee too tall for me so i ride my pit bike. but will swap carps. for fun......
@prestonwoods2914
@prestonwoods2914 4 жыл бұрын
Hello Aaron. I have a mikuni carb just like yours on my z20 max. It wants to leak out of the the hole at the bottom left onto the cylinder head. I noticed you don't have a hose there. Does yours leak? Preston woods. Hudson nc
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Sounds like your carb overflow is stuck.
@prestonwoods2914
@prestonwoods2914 4 жыл бұрын
Thx . I'll give a try
@jamesgeorgevellavella1961
@jamesgeorgevellavella1961 3 жыл бұрын
OR the little rubber ring worn
@StanRoberts-dr2sf
@StanRoberts-dr2sf 8 ай бұрын
Alrite mate i have the same carb uve just explained everything only thing i think u may have missed is where the bendy washer type thing goes after the needle or before if u can help i would be greatful thank u great content aswel thanks
@AaronsEnduro
@AaronsEnduro 8 ай бұрын
Needle in the slide first, then bendy clip, then throttle assembly
@dauntlessentertainment4922
@dauntlessentertainment4922 3 жыл бұрын
great video! At 5:35 i noticed the knob on the old carb but not the new one. What is it for or what does it connect to?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
It was a poorly executed air filter vent tube from the engine for the oil blow by. You just remove the line from the carb and vent to atmosphere
@dauntlessentertainment4922
@dauntlessentertainment4922 3 жыл бұрын
@@AaronsEnduro Thanks! So its fine to leave the hole on the transmission open or should i just remove the tube from the carb?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Keep a tube on a tranny that runs so down the back of the engine
@egotrippinfakkk4237
@egotrippinfakkk4237 4 жыл бұрын
Just installed this carb in my on my bike and it was idling super high this video definitely help me figure out why
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Glad i could help!
@Youserious09
@Youserious09 3 жыл бұрын
Well why was it
@wassup_squez
@wassup_squez 3 жыл бұрын
Aye bro where do you put the cable that’s connected to the air filter when you get a uni?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
You remove 3/4 of it and vent it to the ground. Its a crankcase breather line
@priteshpatel-m4b
@priteshpatel-m4b Ай бұрын
Hey mate , you really good I have problem with my pit bike 125, Chinese I try to put the same airflow as yours and mix it up with carburator , now the bike don’t start 😢
@blakearnold489
@blakearnold489 3 жыл бұрын
Bro I just watched you how to adjust a clutch video and dude honestly, I got out of bed, it was 8:30pm😂 dark basically, and damn man what a difference. Hella appreciate it💯
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Glad it could help!!! Thanks for watching!
@blakearnold489
@blakearnold489 3 жыл бұрын
@@AaronsEnduro hey one more thing bro, if I'm riding say 3rd and I'm just cruising and I got to hit the throttle more it cutts out then picks back up, I have a Mikuni carb on it, thanks
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
You need to tune the c-clip position on the throttle slide, or slightly adjust the fuel trim! If you need a mechanic to guide you i do that by donation! www.paypal.me/agreenway13
@randycarrillo96
@randycarrillo96 3 жыл бұрын
@@AaronsEnduro ready when you arrive hit cash app
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
I only have paypal. Cashapp is not in canada
@DanielFreakinAwesome2
@DanielFreakinAwesome2 2 жыл бұрын
11:45 How did you end up fixing this? Did you have to move the needle up or down?
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
If the bike bogs, lean it out. If it’s popping or cutting out its lean so you need to richen it
@jaredgallegos9573
@jaredgallegos9573 3 жыл бұрын
7:05 i put the fuel line into the vent no wonder it wouldn’t work but i found out the hard way 😓
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
THATLL DO IT! LOL
@appleseed7746
@appleseed7746 2 жыл бұрын
Any links to where I can buy the W shaped washer on top of the throttle needle ?
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
No idea on that one bud! Best of luck
@collindolan5493
@collindolan5493 9 ай бұрын
Probably a bit late on this but I just made one with a hair Bobby pin and it works flawlessly lol
@AaronsEnduro
@AaronsEnduro 9 ай бұрын
Ingenuity at its best! Nicely done
@StayTolerant
@StayTolerant 2 жыл бұрын
First off, thank you for the content, amazing help. Did you ever figure out the needle position? Everything here was spot on, but I picked up from a different video that the clip position needed to be at the lowest (richest) position, not the highest position. I made the change in clip position and it’s great. I’m not even sure I’ll take it off again to install the extended mixture screw that’s on its way. Thanks again.
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
For me it was 2nd clip from the top. But this also depends on your elevation
@basswarehouse2358
@basswarehouse2358 3 жыл бұрын
Hey man, random question. I just got an exhaust plug today for my 2010 yz 450f. I put the plug in and forgot about it and tried to kickstart it. The bike wouldn’t start and noticed there was less compression as well as a sound that sounded like air was being sucked. I pulled the exhaust plug out and it fired right up but I’m worried I may have messed up something internal by doing that. What’s your thoughts?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Its fine. If it runs now its fine. It wouldnt run with it in because the exhaust gas’s can’t escape. No damage should be done
@PeterKnight75
@PeterKnight75 3 жыл бұрын
I’m from Prague in Europe, great videos thanks. my son as a CHINESE pitbike. It starts and then immediately dies, if it starts at all. Any ideas?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Thanks for watching from Europe!
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Watch my video called “dirt bike wont start”
@mrsparksjnr8731
@mrsparksjnr8731 3 жыл бұрын
I was thinking of getting a new carb but the one it came with looks exactly like that carb you brought there
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
U probably dont need a new carb unless yours is the stock crappy one
@SoCalHangerzMedia
@SoCalHangerzMedia 8 ай бұрын
What’s up brother, recently installed a new carb onto my Apollo. Started first kick then died and wouldn’t want to stay on anymore. Fuel comes out of the overflow line as soon as it gets gas. What should I do? Thanks
@AaronsEnduro
@AaronsEnduro 8 ай бұрын
That means the float is set wrong and is getting too much fuel. Google “setting carb float”
@SoCalHangerzMedia
@SoCalHangerzMedia 8 ай бұрын
@@AaronsEnduro Much appreciated, thank you
@AaronsEnduro
@AaronsEnduro 8 ай бұрын
@@SoCalHangerzMedia bikes don’t love to run when they’re flooded!
@Sanesaint1
@Sanesaint1 7 ай бұрын
You forgot to mention to put the clip back on is there a clip that goes over that little clip that you moved
@2FrEsH4ya617
@2FrEsH4ya617 8 ай бұрын
I live in Boston MA area I’m at sea level I have this same carb I did 2 turns out on the bottom fuel screw and needle adjustment I believe I have 125 jet in … so I have 2 questions is the 125 jet too big and what did you adjust the side idle screw to ? Currently I’m only going about 47-52 top and it boobs in 3rd and 4th gear when quarter to half throttle… please let me know thanks I have grom clone fuerza icebear love it
@JasonBohl
@JasonBohl 3 жыл бұрын
Mine came with a white plastic washer looking thing. I know it goes on the needle, but does it go below or on top of the actual needle washer?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
If I remember that was on the stock carb and i think it sat undee the clip but i cant be 100% in one of my videos i show it
@JasonBohl
@JasonBohl 3 жыл бұрын
@@AaronsEnduro I was gonna look at the stock carb that came with the bike but just now noticed the stupid bowl came riveted to the upper portion of the carb so I can't even open it. lol.Guess they didn't want anyone messing with it.
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Thats why we all replace the junk stock carbs! They dont want ya opening it up
@rileyscharapenko3604
@rileyscharapenko3604 3 жыл бұрын
i just put the carb on my bike and it’s set in place where my air filter is being burnt by my pipe is there a way i can stop this?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Two ways 1, wedge the filter to the side 2, buy the angled air filter
@rileyscharapenko3604
@rileyscharapenko3604 3 жыл бұрын
thanks for the help awesome vid!
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Got a video dropping in one hour talking further in depth about the carbs! Glad you enjoyed!
@pbemusicgroup
@pbemusicgroup 4 жыл бұрын
Great video. What did you do with the hose that came off of the stock carb? Im actually in my studio waiting for my carb to be delivered. Had bike (DBX-19) 1 weeks and caught a flat. Valve stem broke.
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
It vents to the ground! Theres a hose clamp on the backside of the engine casing already there for when you put in the aftermarket carb!
@tylertoopetty
@tylertoopetty 3 жыл бұрын
Hey dude do you know where I can get the carb gasket for the vm24 round slide? I swapped my stock carb and used the stock gasket and it’s too small for the carb. I believe the gasket I need is 48 mm hole to hole
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Ebay and or amazon 👌🏼
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Apollomotors.ca might have it aswell
@joedomey3985
@joedomey3985 2 жыл бұрын
Hi does the Apollo Z40 already have an upgraded carb from the factory?
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Nope! They all have the same stock junky carbs!
@gettinjackie12
@gettinjackie12 Жыл бұрын
Hey man do I just remove the hose that comes off the stock air filter or should I plug it thanks!
@AaronsEnduro
@AaronsEnduro Жыл бұрын
DO NOT PLUG IT!!! Vent it to the ground
@AaronsEnduro
@AaronsEnduro Жыл бұрын
If you plug it you will blow your engine
@AaronsEnduro
@AaronsEnduro Жыл бұрын
If you want one on one guidance i can show you on video call. Join here kzbin.info/door/cviyKZ2Vf3IHFliwebzODAjoin
@xkammo
@xkammo 6 ай бұрын
@@AaronsEndurois there a video on this step for venting to the ground/atmosphere. My stock has that nippl on the end of the filter as well and just ordered the uni for my 2020 Coolster XR 125cc
@561drew2
@561drew2 4 жыл бұрын
hey man thank you for this video, not sure if you will see this but i’ve got an apollo rfz 110, do you mind linking me to a carburetor that will
@561drew2
@561drew2 4 жыл бұрын
that’s better than the stock carb**
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Im not 100% if you need a slighlty smaller carb, but youd want a mikuni vm22
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
www.amazon.com/gp/product/B07NW7CMVQ/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07NW7CMVQ&linkCode=as2&tag=aarongreenway-20&linkId=15f93e77b39fed66aaa008d91bf782c3
@561drew2
@561drew2 4 жыл бұрын
Aaron Greenway thank you bro, have a good one🤟🏽
@earthangelsounds844
@earthangelsounds844 Жыл бұрын
Db14 110cc semi. What’s the best way for adjusting clutch? Everytime I go into first the bike takes off instantly without me giving gas & when I do give gas it’s takes off instantly instead of revving a little then going.
@deziaking7757
@deziaking7757 4 жыл бұрын
I have a 125cc 2013 china pb and is the original air filter usable or what is better with the other one that u recomend cuz i kinda dont wanna spend too much money on it and just wondering the difference
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
The stock cone filter IS JUNK!! Do not use it! The difference between the stock cone vs a good filter is that the cones filter screen with way too big and lets too large or debris through it! I have a UNI Filter and filter oil link in the video description
@shortybx183shortybx8
@shortybx183shortybx8 3 жыл бұрын
I'm from bronx ny everybody hot dirt bike out here😂 bike life for life😎
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
🤘🏼🤘🏼
@Youserious09
@Youserious09 3 жыл бұрын
Hi I have a db-x18 125cc and I replaced the carb with mikuni carb on it . Cranks fine but idles really really high. What can I do ?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Lower the idle with the idle screw on the right side of the bike
@dannyruiz-vega7015
@dannyruiz-vega7015 3 жыл бұрын
10:37 how do you put the thing back in
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
I show at the end of the video
@allan2502
@allan2502 4 жыл бұрын
My 2020 rfx comes with the stock air box do i have to remove the air box and replace it with UNI filter? Thank you
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
No rxf air box is good
@shanepeters1756
@shanepeters1756 3 жыл бұрын
Great help mate. The problem I have is when I’m taking off front standstill it’s really boggy (wants to stalls so have to give it a lot more revs to stop it) and when your cruising and try to accelerate it’s spluttery but once is gets going it’s fine and completely normal. Just seems to be lower end. Any advice mate?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Either fuel screw or idle jet. Check the colour of your spark plug
@shanepeters1756
@shanepeters1756 3 жыл бұрын
@@AaronsEnduro I’d say spark plug looked dry more than anything. The bike also pops like crazy and loud when you decelerate. Also some flames sometimes too. Hope that helps more
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Was the plug black,brown or white at the tip
@shanepeters1756
@shanepeters1756 3 жыл бұрын
@@AaronsEnduro maybe a bit of brown and black
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
It should look like a perfect golden brown roasted marshmallow. Black indicates the mixture is too rich (too much fuel) which will cause bogging
@22047850
@22047850 Жыл бұрын
I have a xmotos 125cc and the idle is high but it doesn’t have a idle adjustment screw on it. How do I adjust it or get the idle down?
@tylercockman6677
@tylercockman6677 4 жыл бұрын
Where’d you get the graphics kit and what plastics interchange with these I just built one with a piranha 160 motor
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
This is just the stock oem graphics kit! Shortly we got something special coming for y’all for graphics!!. I think crf 110 plastics fit. But u can buy genuine oem plastics on Apollomotors.ca
@zahqiirdavis7735
@zahqiirdavis7735 4 жыл бұрын
i have an apollo rfz db18 and my filter has a hose but the new carburetor filter doesn’t, what do i do with the old hose that’s connected to my bike? or do i keep my original filter and connect it to the new carburetor
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Use the new filter its way better ( the 2 stage foam) make sure to use filter oil. Route the tube that used to connect to your filter down the back side of the casing ( the engine) youll see a little tab thats ment for you to clip it in. Its just a vent tube , but you want it pointed at the ground
@zahqiirdavis7735
@zahqiirdavis7735 4 жыл бұрын
Aaron Greenway also, my carburetor didn’t come with that foam filter, it came with one that looks like the original one just without the tube that’s in the back of it
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Don’t use either, those filters are awful and you’ll literally suck dirt into the carb and ur engine. Get a UNI filter. Its the only thing protecting the engine in these bikes
@nicknocella2193
@nicknocella2193 2 жыл бұрын
My bike is still bogging after a new carb put in today I turned idle screw up alittle seemed to not do anything or help do I have to adjust the fuel mixture screw since I touched the idle screw or is it separate operations . Also how do you adjust fuel mixture screw if needed
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Start with the idle and and the fuel screw 2 turns put from all the way in
@nicknocella2193
@nicknocella2193 2 жыл бұрын
@@AaronsEnduro I already turned my idle in alittle but should I screw both screws all the way in and 2 turns out on both you mean I’m confused
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Thats correct. Screw both all the way in. The 2 turns out. And start the adjustments from there
@nicknocella2193
@nicknocella2193 2 жыл бұрын
@@AaronsEnduro do I start the bike or when it’s off turn both all the way in and two turns on each
@nicknocella2193
@nicknocella2193 2 жыл бұрын
@@AaronsEnduro also do I have to take carb off every time because that screw can’t get unless it’s off or I loose a bolt and turn it
@nicky2238
@nicky2238 Жыл бұрын
Sir, if i apply this on my 50cc kids dirt bike, what will happen???
@AaronsEnduro
@AaronsEnduro Жыл бұрын
I highly doubt itll make any improvement or be of benefit
@RIseup440
@RIseup440 3 жыл бұрын
Need a little help i installed a pz30 carb on my 150cc after porting and polishing ... my bike's plug color is lean but bike dies on choke nd also when i pull the throttle aggressively, if i pull it nice md easy it runs great but bogs when like im in 2nd gear on agresive pull it bogs nd dies
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Maybe you’re mistaking “bogging” as lean cutting. Have you tried adding more fuel in the carb?
@RIseup440
@RIseup440 3 жыл бұрын
@@AaronsEnduro i haven't coz i think it dies on choke so may be needs smaller jet or changing the position of slide to rich position.... also changed the plug but didn't do anything , the bikes comes with 30mm stock carb now its pz30 38mm carb do u think its not compatible?
@gerardr4869
@gerardr4869 2 жыл бұрын
@@RIseup440 hi, what did you end up doing to solve your bogging problem?
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
I think your carb is too rich. But checking the spark plug will verify that
@KozKnowz
@KozKnowz 4 жыл бұрын
Sorry to ask so many questions Aaron. Just picked up the UNI filter... seems to get really close to the exhaust. I noticed that @15:29 in this video, you have a chunk taken out of one side of your foam... is that because of the same issue with the exhaust? I have two Apollo's and was debating moving away from the foam filters because they are right up to the exhaust, unlike the SSR which is off to the side. Thanks in advance...
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Hey brotha, you can always ask questions on this channel! Yes that chunck is missing from my filter from the exhaust burning it. You can buy the turned elbow for your bike and itll point like the ssr to the side. Ive sinced heat wrapped the exhaust which has alleviated the burning issue
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
You can find the elbow on amazon
@KozKnowz
@KozKnowz 4 жыл бұрын
@@AaronsEnduro I bought the angled one that you posted... still pretty close and takes up a lot of space. But, I was considering heat wrapping anyways since my bike was missing the shield when I bought it. I'm assuming foam is still the better option over the pleated ones I'm seeing out there?
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
The cone filters suck ballss, 2 stage foam with the exhaust wraps is the way to go. Note when u do the wrap and it gets wet itll smoke off the exhaust ( which doesnt bother me)
@thirdeyesurvivor3886
@thirdeyesurvivor3886 2 жыл бұрын
The brass pin in my stock carb is annoying as hell, how would you recommend removing it??
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
I used a drill bit
@thirdeyesurvivor3886
@thirdeyesurvivor3886 2 жыл бұрын
@@AaronsEnduro I used players to force the cap to unscrew, it broke the threads and I got it off and installed my new one. Kinda sad tho that I had to break the old one, it was brand new and in perfect condition abs now it’s broken
@masterprediction7353
@masterprediction7353 3 жыл бұрын
What is the point of the air filter if you need oil for it not to blow up your engine
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
The filter oil is to protect your engine
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
The filter oil Goes onto the air filter. Its completely separate from the engine oil . The reason youll blow ur bike up without it is the foam filters are supposed to have filter oil applied to be able to fully entrap dirt particals
@masterprediction7353
@masterprediction7353 3 жыл бұрын
@@AaronsEnduro is there a filter I can get that doesn’t need the oil?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Ones that are shit lol
@masterprediction7353
@masterprediction7353 3 жыл бұрын
@@AaronsEnduro I just feel like needing the oil for the air filter to work kinda defeats the point of an air filter lol
@jeffreyvillegas7301
@jeffreyvillegas7301 3 жыл бұрын
I just ordered pretty much everything you said for my rfz 125cc .. now where you at so you can help me install it lol 🤣
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
I do mechanical help by donation through paypal on instagram
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Send me a dm at aaron_greenway
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Donate here www.paypal.me/agreenway13 Then i can spend some time to help you out!
@jeffreyvillegas7301
@jeffreyvillegas7301 3 жыл бұрын
Are you located in Jersey ?
@jeffreyvillegas7301
@jeffreyvillegas7301 3 жыл бұрын
If you are I'll come pay cash
@elitegamer4844
@elitegamer4844 4 жыл бұрын
did the exact setting for the air screw and needle for throttle fix the bogging or did you also have to adjust the jets. I was just wondering because I am a noob and wanted to use the exact settings you used for your bike.
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Okay so, note this: you cannot copy jets from someone else(because sea level changes what jets you need) (im at 0ft sea level) , therefore as well, the needle placement will be particular to what jetting you have for when you want the throttle to open how much
@elitegamer4844
@elitegamer4844 4 жыл бұрын
@@AaronsEnduro thank you
@christianquarles7375
@christianquarles7375 3 жыл бұрын
What did you do with the tube that connects to back of the stock air filter? And did you have to tune the bike after you changed filters
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Remove it , and run the hose that come from the engine down the back side if the casing
@chappy0690
@chappy0690 Жыл бұрын
The bottom 'vent hose' is your overflow, make sure it's routed correctly and not dumping fuel over your motor 👍
@AaronsEnduro
@AaronsEnduro Жыл бұрын
Correct!!
@ttvgaming3368
@ttvgaming3368 4 жыл бұрын
The cord that is connected to my original card filter where does it go since this carb has no spot for it
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
You ditch it all together!
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Then run the tube that goes from the engine to the ground (its your oil breather tube)
@Kshoop92
@Kshoop92 2 жыл бұрын
So living at 800 ft above sea level.. My Replica VM22 came with 95 main jet and 38 pilot which I tried with the screw 2 turns out, was sputtery and would cut out at 0 to 1/ throttle then go great until with warmed up then cut out at any throttle position acted like it was lean, pulled the plug and sure enough it was, thinking Im gonna have to try a bigger pilot and one or two sizes up on the main.
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Yessir
@shortybx183shortybx8
@shortybx183shortybx8 3 жыл бұрын
My pit bike is 14 back tired and front 17. It look like a regular dirt bike since I put all my lights on it..
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
sickk
@KozKnowz
@KozKnowz 4 жыл бұрын
I have gas coming out of the bottom line on my Mikuni. Any thoughts on a fix? I sprayed the inside with carb cleaner and adjusted fuel mixture screw to two turns. I also adjusted the pin like you demonstrated.
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Thats the float getting stuck. Either debris in your float or something catching the float up
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Try opening the bowl drain and then closing it after it drains. It can be a try and repeat task to clear it out. I had to clean my carb like 8 times when the float was stuck
@KozKnowz
@KozKnowz 4 жыл бұрын
@@AaronsEnduro thanks for the replies! I’ll take it back apart and remove the pin to really get in there. I’ll clean more thoroughly and see if that helps.
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
The pin insint where the carb bowl is
@KozKnowz
@KozKnowz 4 жыл бұрын
@@AaronsEnduro I’ll try this over the weekend. First time working on a carb... your video is great. I didn’t remove the float pin or float when I sprayed cleaner. I’ll do that next time to really clean. When you say open the bowl drain. Are you referring to the bottom line?
@johnkelly3137
@johnkelly3137 3 жыл бұрын
Any chance of doing an installation video with the round style carb that uses the adapter? 👍👍
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Its the same as any other carb. You just need the flange adapter
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
I have new video on my channel teaching you about carbs
@561drew2
@561drew2 4 жыл бұрын
hey another question, my air filter has a tube on the right side that goes to the back of the bike, do I just remove the air filter and the tube?
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Remove the tube, and what the tube connects into ( oil air seperator)
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Skip the “black piece” go straight from the motor the ground
@561drew2
@561drew2 4 жыл бұрын
Aaron Greenway sorry for the horrible explanation, I don’t know anything about these bikes lol
@561drew2
@561drew2 4 жыл бұрын
Aaron Greenway is there any way I can send a video or picture of what i’m talking about? may be easier
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Instagram @aarongreenway
@samst-louis9389
@samst-louis9389 Жыл бұрын
Hi Aaron, do you have some kind of "clip" to hold the throttle cable on top of the carb, where the throttle cable enter the carburetor because mine tend to get out when the throttle is fully close or maybe I just need a new cable?
@AaronsEnduro
@AaronsEnduro Жыл бұрын
This is too long ago that I honestly dont remember. Id say yea theres a clip usually or where the throttle cable locks in the the throttle slide so it cant slip out
@samst-louis9389
@samst-louis9389 Жыл бұрын
@@AaronsEnduro No problem man, I know your vid it's like 2 years ago lol, thanks for your reply, I'll figure that out anyway, thanks man.👍
@driftsideways1526
@driftsideways1526 3 жыл бұрын
Gas is coming out of the little oxygen tube , how can I fix that ?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
If you’re referencing the tube at the bottom of the carb, thats the carb overflow. Its designed to pour gas out if the carb is overfilling with gas in the carb bowl. You may have a sticking float, or a cracked float etc.
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
This video will help you understand the float/carb kzbin.info/www/bejne/paqqgWSribpgoKc
@lmccoy010
@lmccoy010 4 жыл бұрын
This is a great video down to every detail I like an sub ..I have a question so for a apollo 125cc z220 max that breather hose you say on the carb at the bottom that comes on the custome carbs do it supposed to leak fuel out time from Time ? I'm not talking about pouring out but I do get fuel coming out of that hose is that normal since it is connected to the carb or no ...?
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Larry McCoy sounds like your carb float may be getting stuck, which would result in the carb bowl overflowing with fuel
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Larry McCoy if you’ve just dropped the bike on its side thats normal for some fuel to leak out after
@lmccoy010
@lmccoy010 4 жыл бұрын
@@AaronsEnduro where is the carb float located at ? I'm guessing inside the carb...is this dangerous or would it harm the bike I drop the bike twice its basically new I had the bike 1 month an only rode it four times I willey up an fell both times didn't know these bikes have so much torque I'm new to riding so the bike runs ok bogs sometimes but I notice that the hoes sometimes leaks gas an my gas filter fill up with gasoline now ..it didn't fill up the first ride I took but now the gas filter stay pretty full so I'm just making sure all this is normal or no.. it still starts an run ..an thanks for replying Aaron
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Definetly a stuck float. Google search is best way for you to understand what it is. Not sure how to describe it via text
@lmccoy010
@lmccoy010 3 жыл бұрын
@@AaronsEnduro thanks for the reply u was right hit it fixed thanks again I really appreciate this
@pitbikehype5281
@pitbikehype5281 3 жыл бұрын
Hey Aaron do you run an upgraded CDI? Thanks for answering all my questions you deserve alot more subs.
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Hey buddy, thanks for leaving a comment and watching the videos! I run the stock cdi box that came with the 125cc engine (on my 150cc engine swap)
@JesusSavedDrew
@JesusSavedDrew 4 жыл бұрын
Good vid but my throttle cable won’t come out the old carb what should I do ??
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
You’re referencing the metal cap with the cable ( and the cap just keeps spinning right?) on the stock carb there is a little brass pin you need to drill out to remove it
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Spin the cap around till you see it ( on the top of the carb)
@JesusSavedDrew
@JesusSavedDrew 4 жыл бұрын
Aaron Greenway Thanks great steps but now I was trying to change my clutch lever and ended up disconnecting my clutch cable from the the little lever that actives the clutch wat should I do ⁉️ I need to my the clutch cable long enough to reach the little metal thing again
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Pm me via instagram for detailed help @aaron_greenway
@project5r680
@project5r680 2 жыл бұрын
How do you tell if the choke is on or off on that bike
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
If you really want to know 100% take the rubber intake off the carb and see which way the butterfly valve moves. When its open the choke is off
@corz758
@corz758 3 жыл бұрын
Do you know why a new 125 engine and new carb the exhaust gets hot fast while idling do you know why
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Running too lean!
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Aka not enough fuel
@corz758
@corz758 3 жыл бұрын
@@AaronsEnduro thanks boss I will try adjust the air fuel mixture but its hard as the screw is on the bottom of the mikuni vm22 carb
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
I know the pain, if you use a socket flat head you can just barely get ur hand in there to adjust it while its running
@corz758
@corz758 3 жыл бұрын
@@AaronsEnduro I will try that thanks man
@TFDStudios
@TFDStudios 3 жыл бұрын
does a vm24 fit on a apollo z20?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Should yep
@justen5586
@justen5586 3 жыл бұрын
Do you need a special needle clip for mikuni carb or is a needle clip from a honda good
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
A new carb should come with a clip
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
As long as the clip is doing its job i dont see why a shape would directly matter
@justen5586
@justen5586 3 жыл бұрын
@@AaronsEnduro thanks you help me out allot with my project
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
@@justen5586 no worries ma dude, happy to help
@justen5586
@justen5586 3 жыл бұрын
@@AaronsEnduro 😁
@gregopahl4903
@gregopahl4903 4 жыл бұрын
I tried to do the fuel screw but I did it 2 times I supposed to do it 2 and a half ? , also my bike runs good in neutral but when I leave neutral it has a total loss of power when I try to give it gas so any ideas of what to do ?
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Sounds like a small main jet if it tuns good at idle
@gregopahl4903
@gregopahl4903 4 жыл бұрын
@@AaronsEnduro yea it sounds good when it neutral so how should I go about it with the main jet ? Kinda figuring all this out as I go
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Find out what size main jet you have, go a size bigger
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Could also try moving the needle position shown in the video above
@gregopahl4903
@gregopahl4903 4 жыл бұрын
@@AaronsEnduro when I leave neutral it bogs and won’t go past that point
@calebaguacate3724
@calebaguacate3724 3 жыл бұрын
hey man ik this comment is new compared to this vid but how difficult would u say this would be for someone who knows nothing about bikes, i have changed my clutch assembly but this seems more intricate.
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Honestly really simple and easy. It just takes time to dial it in
@jamesgeorgevellavella1961
@jamesgeorgevellavella1961 3 жыл бұрын
I'm scared to touch clutch so in comparison this is piss easy
@randyrose3750
@randyrose3750 4 жыл бұрын
Where did you get the Filter oil ? Great video
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
From ebay for 30$ canadian
@makarnovikov9128
@makarnovikov9128 4 жыл бұрын
Or at a motorcycle shop
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Totally!
@youchoose4526
@youchoose4526 3 жыл бұрын
Where does the fuel line connect I need help
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Send me a dm on instagram @aaron_greenway And ill help Make sure to slap that like button while ur here ;)
@youchoose4526
@youchoose4526 3 жыл бұрын
@@AaronsEnduro ok thanks
@youchoose4526
@youchoose4526 3 жыл бұрын
@@AaronsEnduro I sent you a message on Instagram
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Got it !
@corey_lajoie_fan
@corey_lajoie_fan 2 жыл бұрын
Hey, I know i’m way late lol, but i’m doing this thursday for my apollo 135 x19, how the heck do I drill or cut out that little brass pin keeping you from unscrewing the stock throttle cap? Like wth? China can be extremely stupid sometimes. All the time.
@corey_lajoie_fan
@corey_lajoie_fan 2 жыл бұрын
Also i’m doing the exact same carb as you. Do I need to purchase any adapter?
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Use a drill
@corey_lajoie_fan
@corey_lajoie_fan 2 жыл бұрын
@@AaronsEnduro So turns out that little brass pin unscrews with a pliers or something like that, no need to drill! Installing the mikuni knockoff tomorrow!
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Exciting stuff
@mystery5485
@mystery5485 2 жыл бұрын
what is that line for the intake when you first buy it and can you run it without it
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
It connects to the oil/air separator which most people delete (myself included) and the you vent the tube coming from the engine side to the ground
@mystery5485
@mystery5485 2 жыл бұрын
@@AaronsEnduro ok thanks
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Thanks for watching and supporting 🤘🏼
@mystery5485
@mystery5485 2 жыл бұрын
wait so i just zip tie it to the frame or do i buy a small vent filter then attached it to it
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Theres a clip in the back of the engine from factory to slip the tube into, then cut it to size
@lewistait2708
@lewistait2708 2 жыл бұрын
My pitbike runs fine revs fine until I would say 15 mins of riding it starts to bog when I accelerate to open throttle but if u keep it open throttled it just bogs it doesn’t die carbs clean been through that bought a new carb and air filter and still same results
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Not really too sure on that one. Possibly a float issue? Definitely some sort of fueling issue
@lewistait2708
@lewistait2708 2 жыл бұрын
@@AaronsEnduro gonna order another carb and try again
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Id start with checking over the current carb you have to try and isolate the issue. (So you know what your issue is)
@lewistait2708
@lewistait2708 2 жыл бұрын
@@AaronsEnduro their not much I can do mate as the bowl screws are rounded and doesn’t come loose so been using my stock one but it’s same issue with that and I’ve went over the full thing from cleaning jets to adjusting the bowl to the right way so that’s how I know it’s not my carb with the rounded screws
@lewistait2708
@lewistait2708 2 жыл бұрын
Gonna check if it’s getting enough fuel tomorrow
@tombuchanan9679
@tombuchanan9679 3 жыл бұрын
Is there anywhere you can buy new vent tubes mine fell off
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Go to your local hardware store and get some rubber hose. The vent tube is not specific or special. Now for the carb bowl drain line (if u lost that) Same thing go to hardware store and buy some gas safe fuel line
@tombuchanan9679
@tombuchanan9679 3 жыл бұрын
@@AaronsEnduro cheers
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
🤘🏼
@almi9htytymcgee72
@almi9htytymcgee72 3 жыл бұрын
What will the thickness be for the Apollo 125cc be for the custom dirt bike graphic
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
They make it in multiple thickness’s
@almi9htytymcgee72
@almi9htytymcgee72 3 жыл бұрын
@@AaronsEnduro It don’t matter 🥴which thickness because I see the price changes and I just would like a different one from the one I got
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
You want a thicker one ( so it doesnt wear/rub through)
@almi9htytymcgee72
@almi9htytymcgee72 3 жыл бұрын
@@AaronsEnduro ok appreciate that man😎👍
@almi9htytymcgee72
@almi9htytymcgee72 3 жыл бұрын
@@AaronsEnduro hey do you have a link for an exhaust pipe
@latovis6818
@latovis6818 Жыл бұрын
Okay easier than I thought, I was so close to messing with the jets 😭
@AaronsEnduro
@AaronsEnduro Жыл бұрын
Very straightforward
@latovis6818
@latovis6818 Жыл бұрын
@@AaronsEndurohey could you make a video on how to properly set the needle and the little pin on top, you never showed it and my throttle cable won’t go through the slide
@coryflint7122
@coryflint7122 3 жыл бұрын
What did you do with the breather hose that came off the stock filter?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Deleted it. Then the hose that comes from the engine, runs to the ground off the back side of the engine casing.
@coryflint7122
@coryflint7122 3 жыл бұрын
@@AaronsEnduro thanks dude. Hose just hangs down like carb hose breather? I put mikuni on my rfz and found there was a rivet so i drilled it out and swapped carbs. Runs better now 🤘🏻
@coryflint7122
@coryflint7122 3 жыл бұрын
What spark plug are you running?
@coryflint7122
@coryflint7122 3 жыл бұрын
My uni filter is way too big that i ordered for mikuni 🙄
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Yep!
@Purple_thunda
@Purple_thunda 2 жыл бұрын
Hello i put the mcoonie carb on and my bike wont start now any suggestions
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Id check the fuel screw position to see if fuel is even coming out
@Purple_thunda
@Purple_thunda 2 жыл бұрын
@@AaronsEnduro gass is coming out and when i put the new carb on my bike just wont start everything is connected correctly
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Thatd indicate your float is incorrectly set
@Purple_thunda
@Purple_thunda 2 жыл бұрын
@@AaronsEnduro i just checked it and it is not overflowing and is set good would anything else be the problem
@AaronsEnduro
@AaronsEnduro 2 жыл бұрын
Where is the fuel leaking from
@danteregnetta4878
@danteregnetta4878 Жыл бұрын
So mine is bogging bad how do I adjust the carb to go back to begining like I had somebody mess with my cop and I don't know what they did to it and now it's bogging bad.. so hat should I do to get rid of the big I just the rpm screw to get it running normal with the choke closed now the bogging wat should I do
@AaronsEnduro
@AaronsEnduro Жыл бұрын
If you’re looking for one on one guidance you should check this out kzbin.info/door/cviyKZ2Vf3IHFliwebzODAjoin
@Blockhead_teda
@Blockhead_teda 3 жыл бұрын
You can twist the brass pin out the stock carb
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Good to know
@jakebates9020
@jakebates9020 Жыл бұрын
Just got one of these lol what do I need to do with the hose coming out of the filter
@AaronsEnduro
@AaronsEnduro Жыл бұрын
Delete the air/oil separator, and run the section coming from the engine down the back of the engine. Do not block it off! Its the crankcase vent for releasing crankcase pressure
@jonlopez8874
@jonlopez8874 4 жыл бұрын
how do you put back da pin in da pistol valve?
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Send me a dm about what ur talking about
@neylandwilliams1345
@neylandwilliams1345 3 жыл бұрын
My bike pops and when you give gas it stays at high rpms and didn’t go back to idle for a while can you please help me.
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Throttle slide is getting stuck, sounds like its also running lean
@neylandwilliams1345
@neylandwilliams1345 3 жыл бұрын
So what do I do about that?
@neylandwilliams1345
@neylandwilliams1345 3 жыл бұрын
And it only runs with choke on
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
I would start with removing your spark plug and seeing what color it is. Then based on that id tune the carb appropriately
@neylandwilliams1345
@neylandwilliams1345 3 жыл бұрын
Thank you so much I fixed it 🏍
@oakray2005
@oakray2005 3 жыл бұрын
Which Malini did you put on buddy . I bought vm22 . Using Vernier it measures 26 ??
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
I used a vm24
@oakray2005
@oakray2005 3 жыл бұрын
@@AaronsEnduro Hi Aaron Thanks for getting back to me buddy . I just get confused because a VM 24 measures 28 a VM 24 measures 26 so 28 on 125?? . did you have to tune it or change jets . That's out my mind at rest thankyou I will put it on . I have 17 pit bikes . I got a pit bike fetish lol . I got so many so my son's can take their friends with us and obviously I needed to get 1. About 6 if them need work doing to them . watching your videos has helped loads . Will you do a valve clearance check/adjustment vid . I'm doing mine for the first time . If I do them before you do yours I will let you know if I find any awkward bits to watch out for . Your videos are brilliant buddy you are so lucky where you live . If you need any parts I have hundreds of new parts I bought to fix all mine up just let me know . I did put a performance exhaust on my Welsh pit bike (stomp)140 and the difference was insane . If you ever need anything brother let me know , like help buying parts or sourcing any parts I will gladly donate it or post some over . You are a top dude and hilarious . Keep up the good work my mate and will try to catch a live stream . Chris UK
@skywalkerog632
@skywalkerog632 3 жыл бұрын
Would a rich mixture make the bike bog and cut out in 3rd gear?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
A rich mixture would do that! Its possible you just need to adjust the clip position on the throttle slide needle tho! (That controls fuel mixture based on throttle input)
@skywalkerog632
@skywalkerog632 3 жыл бұрын
@@AaronsEnduro thanks for speedy reply yeah the bikes new only been out once and cleaned and put away for a month. Starts fine revs up just when in 3rd it stalls out can't be the jets if it's revving out in 1st and second ?? Plug looks black
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
If 1st and second seem to have no hesitation or stuttering id believe your needle clip position is what u should start with moving
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
If the plug is black you definitely have too much fuel. It should look golden brown like a roasted marshmallow
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Id take a 1/8th turn of fuel out. Then if its still bad, try the needle adjustment
@jerolehmuskoski5108
@jerolehmuskoski5108 3 жыл бұрын
I just cant get my bike work with this carb when its below 5 celcius so works only in summer
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
are you using the choke?
@gregopahl4903
@gregopahl4903 4 жыл бұрын
I messed with the needle and put slide to the top but I forgot exactly how to put that metal ring in right any one can help ?
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Watch my carb video! It shows how to pit it together
@gregopahl4903
@gregopahl4903 4 жыл бұрын
@@AaronsEnduro I did but it doesn’t show exactly how to put the metal ring in correctly
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
The little w clip? Just put in inside the cyclinder, and push it down with the throttle spring
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
It goes on top of everything ( the pin, and rubber o ring
@ChrisBundy-f3v
@ChrisBundy-f3v Жыл бұрын
Mine is a mfd of 05-2021 and has the choke lever on it is that stock looks stock
@tonycastillo8644
@tonycastillo8644 3 жыл бұрын
How did you move the clip down on the needle
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Just pop the c-clip off. If you have a a knockoff carb it might not have the notches in the needle to raise or lower the c-clip
@tonycastillo8644
@tonycastillo8644 3 жыл бұрын
@@AaronsEnduro I actually just moved it up to the second notch like you did right before you responded ! I’m having boggin issues like you did. And start up problems when it’s warm already. I think it’s getting to much gas. I have the carb taken apart and I’m gonna clean it in the morning for now and see how it runs. Imma order a new carb , filter and spark plug tmr morning
@tonycastillo8644
@tonycastillo8644 3 жыл бұрын
I’m gonna “tune” it as well to control the fuel amount coming jn
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
What colour was your spark plug tip
@tonycastillo8644
@tonycastillo8644 3 жыл бұрын
@@AaronsEnduro it was dark as hell. Not good so I got a new one just now actually and then imma clean the carb now. Put everything together and see how it runs
@jlupemadeit
@jlupemadeit 3 жыл бұрын
Hey man awesome tutorial. Do I re use the air filter pod from stock carb and place new filter over the pod?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
What is this “pod” you speak of? If you’re asking if you should use the original air filter , thatd be a no. You definitely want to run a good UNI 2 stage foam filter
@jlupemadeit
@jlupemadeit 3 жыл бұрын
@@AaronsEnduro the carb I got seems like it just came with the filter cover
@jlupemadeit
@jlupemadeit 3 жыл бұрын
Can I message you on IG?
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Like a fabric sheeth? Thats for when you wash the bike
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Hard to know exactly what your talking about without a visual
@Justin_Newman
@Justin_Newman 3 жыл бұрын
Those are overflow hoses no breather tubes, if your card if flooded it will dump out of that hose
@AaronsEnduro
@AaronsEnduro 3 жыл бұрын
Ive learned since this video haha thanks! This was my first time pulling a carb apart!
@andrewleippe5162
@andrewleippe5162 4 жыл бұрын
My Apollo 007 bogs when you rev to quick and deep. Is that normal? It revs when I rev it slowly and rides perfect.
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
You have to small of main jet, or not enough fuel (adjust the mixture screw)
@andrewleippe5162
@andrewleippe5162 4 жыл бұрын
Aaron Greenway some people said it’s the pilot jet. And I turned the screw in every position possible still nothing. My spark plug is black though but still starts first kick
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
Okay if you’re spark plug is black, you have too much fuel up top. Meaning too big of a main jet , or too much fuel from the mixture screw
@AaronsEnduro
@AaronsEnduro 4 жыл бұрын
And are you sure you’re adjusting the fuel screw, not the idle screw?
@andrewleippe5162
@andrewleippe5162 4 жыл бұрын
Do you have an Instagram so I can dm you pictures. Iam turning the fuel/air screw and it is not working.
Understanding How To Tune A Dirt Bike Carb
9:49
Aarons Enduro
Рет қаралды 134 М.
Top 15 + Tricks And Tips For Your Pit / Dirt Bike!
14:44
Aarons Enduro
Рет қаралды 48 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,3 МЛН
黑天使被操控了#short #angel #clown
00:40
Super Beauty team
Рет қаралды 60 МЛН
Smart Sigma Kid #funny #sigma
00:33
CRAZY GREAPA
Рет қаралды 39 МЛН
Enceinte et en Bazard: Les Chroniques du Nettoyage ! 🚽✨
00:21
Two More French
Рет қаралды 42 МЛН
The BEST Way To Fine Tune Idle Mixture Screws For Your Carburetor
15:16
TheMotorcycleMD
Рет қаралды 1,9 МЛН
How To Make Your Pit Bike Faster | Apollo 125cc Pit Dirt Bike
8:48
Aarons Enduro
Рет қаралды 164 М.
Does Your Dirt Bike Bog?
10:33
Cameron Niemela
Рет қаралды 1,2 МЛН
Remove flat spot from Mikuni carburetor Chinese pit bike
14:46
Wheels engines and steel
Рет қаралды 49 М.
How to Install NIBBI Racing Carburetor on ANY Chinese 125cc Pit Bike
25:44
How To Tell If Your Dirt Bike Is Running RICH Or LEAN
12:11
MotocrossHideout
Рет қаралды 195 М.
Dirt Bike Wont Start? Here's How To Fix It + EXTRA TIPS
11:30
Aarons Enduro
Рет қаралды 272 М.
Каха и дочка
00:28
К-Media
Рет қаралды 3,3 МЛН