How To Make Your Pit Bike Faster | Apollo 125cc Pit Dirt Bike

[@damoncatlin734]

It went from family friendly to not I love it

[@AaronsEnduro]

Just my style 🤘🏼

[@cadenwest1542]

Fuckin Carole baskin

[@AaronsEnduro]

😂😂😂

[@damoncatlin734]

@@cadenwest1542 lmao

[@AaronsEnduro]

Thats son bish

[@inutil6117]

Dude, you are literally about to make me buy one of these. I wasn't really gonna make it my main goal, but seeing you build this thing has made me reconsider. Im 100% subscribing.

[@AaronsEnduro]

These things are a friggen blast to ride man!!! Love mine with the 150 swap in it!!

[@inutil6117]

@@AaronsEnduro I can only imagine! I didn't even know it was 150 swapped, thats sick. I was looking into 125's, but now I'm starting to see these 150's and they're like $400 dollars more than a 125 on amazon. I was actually gonna ask, what's a cheap but good and reliable route when it comes to kinda pit bikes. I've seen some older ones that have a 5 speed instead of a 4 speed, and I feel like just buying a 150 with a 5 speed, and minimal upgrades might be better than buying a 125 with a 4 speed and putting money into it. What do you think? I just turned 18, work part time, and get few hours a week paychecks are typically $100-$150 a week.

[@AaronsEnduro]

My 150 is still a 4 speed. Realistically if you want to buy something checkout my buying guide video

[@TFDStudios]

please don’t buy it, waste of what was $1500 that i spent and now probably 2200, i always have something to fix

[@tysonmatthews2765]

For $2200 buy a used Yamaha or Honda they last a lifetime

[@treasuredroperX]

I went ahead and put a new makuni carb on it too. Cheap. Runs like a beast. Feels wayyy more efficent

[@AaronsEnduro]

Heck yeah!

[@anthonystewart-ogle3766]

Put a ribbi carb on it 60$

[@anthonystewart-ogle3766]

Nibbi*

[@AaronsEnduro]

If it runs mint with a mikuni why would you change carbs again?

[@anthonystewart-ogle3766]

@@AaronsEnduro depends on how much you ride and what gas you run the mikuni clones kill the throttle cable and always get stuck wide open on the throttle when you start it so you have to rebuild the carb every time you finish riding, or your bike will blow up next time you start it

[@levitezoe1804]

My OCD was triggered immediately when you placed the gears on top of each other I was literally about to click on another video and then you fixed thanks for the video

[@AaronsEnduro]

Glad you enjoyed it! Thanks for watching and supporting the channel!

[@robertc.1698]

Damn bro, you just explain everything so easy! 👏👏

[@AaronsEnduro]

I tried to make it as simple as i could!

[@KamikazeDigital]

Fire the camera man, he's slowing you down.

[@Craneboys_sportsoutdoors]

This guy is going to take over KZbin dirt bike channels

[@AaronsEnduro]

Thanks for supporting the goal!!

[@VonBuckets]

Can’t wait for more videos on the Apollo I also have one myself, it’s a x16 thinking of doing the same thing on mines. Love your videos man they help a lot keep up the good work💯💯

[@AaronsEnduro]

Totally worth doing!!

[@AllInOne-hg6xy]

Check out our apollo's dbx 18's and 19 . Search "all in one changes I've made to my apollo dbx 18...

[@bruzza2532]

If the bike goes 80 mph 85 then it might hit a hundred depending on what size rockets you put on biggest sprocket in the front will make you go faster and a smaller in the back will make you go faster in the long run slow in the beginning bigger one you go fast in the beginning but not in the long run

[@kelvinjones1866]

Now I'm really interested in one of these bikes thank for the video he looks like a young Richie Cunningham from Happy Days lol

[@AaronsEnduro]

Thats not the first comment to say that 😂😂😂 these bikes a lot of fun man!

[@kelvinjones1866]

@@AaronsEnduro what was the top speed Aron now that you changed you gear?

[@AaronsEnduro]

100km/h

[@alvaroherrera8969]

Chinese bikes for life

[@AaronsEnduro]

Hell yeah man!

[@AmillionCo]

hey i’ve been watching and learning from you for the pass few years and i just wanna say thank you. I NEED HELP! im looking for a engine for apollo Rfz X18 Amazing link please and thanks in advance

[@AaronsEnduro]

The engines seem to be harder to come by nowadays. Check out apollomotors.ca for engines! Thats where i got mine from!

[@c.siikz_]

Really late comment. But I’m trying to find some wheel bearings for the front and rear of my x-18 and I’m having no luck. Any recommendations?

[@AaronsEnduro]

Better late than never! You should look at apollomotors.ca and see what the diagrams breakdown gives you for part numbers. Then either order from the website or cross reference the part number online!

[@DaytoDaywithDnMerc]

I just got the last orange rxf 150 from y’all gals week I’m trynna ride

[@AaronsEnduro]

Heck yeah dude! Thatll be a blast!!!

[@tomspaulding4321]

Thank you I bought a new 19 tooth front sprocket I'll let you know what happens I also but I 17 and case of it didn't fit because the KTM I went to told me they have never put that big of a front sprocket on a pit bik

[@AaronsEnduro]

That is like way overkill to big of a front sprocket lol. Like 16/17 tooth max for a 125 pitbike. That things gonna outta its efficiency zone and be slow asf accelerating but have a higher top speed.

[@thomaskuhn9003]

I have an x6 I put a mikuni carb and some new gearing and got it up to 55

[@AaronsEnduro]

Thats dope!

[@PoppyRaid]

Hi , i changed my front sprocket on my honda rebel 125 but found that only really a difference when down hill as the four stroke wont rev higher with that higher front gear with the 125 cc . What other ways are there eg re bore / valve upgrades etc Thank you

[@scottneal2738]

I'm told my Apollo 110cc automatic kick start was to be going around 40mph but it seems way less. Looking it up doesn't seem to match with the info page of the bike and says it should be a semi-automatic. It has drive and neutral, which seems more like automatic not semi to me. Makes me think the top speed to be less ad if the CCs are less than I was told. Definitely looking to increase the speed a little bit.

[@cohlveiws]

Thank you im getting a dirt bike so i might after a little bit get that

[@jera2021]

hi i just bought a apollo used off marketplace it starts up first kick and everything runs good no down shift all up besides neutral but some times it gets stuck and its hard to shift past 3rd gear any recommendations of parts to get to fix it

[@AaronsEnduro]

changing motor oil can help. Other than that, its just the crappy design of the apollo transmissions, and thats probably why the person waws selling the bike

[@mrtravoiceburges]

Thank you great video awesome channel just found you. I bought one and it was my first time on a bike today. Well it's 125 pit bike it will hit 50 now. Can't wait to do the mod

[@AaronsEnduro]

Tire mod and the gear mod will help your bike go even faster! Check out those two videos forsure! Thanks for watching! Subscribe and join the family :)

[@mrtravoiceburges]

Thanks I launched it today on my first time in second gear in the grass didn't even fall down and didn't hurt anything. The wheel came up and the bike almost did a back flip 🙃

[@mrtravoiceburges]

Seems like you can get one of these up to around 70 mph?

[@AaronsEnduro]

Ive gotten mine up to 100km/h

[@jamesthebond0072]

So it is more bigger and more tooth the faster. and the back wheel sprocket if that's smaller and has lead teeth makes faster or slower I just got them for a bike in working on

[@AaronsEnduro]

thats correct

[@youngflyguy5730]

Did u have play in the sprocket cause when I put my 17tooth on the pin didn’t like up with the holes on sprocket and it was making my chain hop

[@AaronsEnduro]

You might have the wrong spline diameter

[@youngflyguy5730]

@@AaronsEnduro 17mm

[@AaronsEnduro]

Send me a video on instagram

[@EnduroTravelR]

Awesome videos man, just found your channel and loads of sick videos! 💪🏼

[@AaronsEnduro]

Glad you enjoy it!

[@EnduroTravelR]

@@AaronsEnduro 🤘🏼

[@AaronsEnduro]

HERES TEN MORE WAY TO GO FASTER: kzbin.info/www/bejne/pqCniYWHbMumgc0 Everything you'll need to make your Pitbike run better and faster Makuni Carborator (replica)- amzn.to/2AXlSIF Makuni Carborator (Genuine) - amzn.to/3g0injX UNI Carb filter - amzn.to/3cNzPpP UNI Carb FIlter OIL (YOU NEED THIS) - amzn.to/31eGaYX 16 tooth front sprocket - amzn.to/30trEMD And video Part 2 top speed tests here: kzbin.info/www/bejne/l4rcYX9orMalmqc

[@mikeautrey7764]

I have a newer apollo RFZ Z MAX 20, I wonder if they are all the same.

[@AaronsEnduro]

Very likely!! I havent seen a bike that isint 17mm you can verify it by checking what chain size you have (420 or 428)

[@reggiemims4423]

I don’t think I seen the follow up video did it make the bike faster by changing the front gear

[@AaronsEnduro]

Yes it did! Definitely helped give it more top end!

[@AaronsEnduro]

Maybe 5-10% more top end

[@Curxie]

If I get an 18t front sprocket we’ll I need to buy a new chain?

[@AaronsEnduro]

Likely going that much bigger yea. Thats a huge front sprocket tho

[@Curxie]

@@AaronsEnduro thanks

[@kobechrist7506]

whats the difference betwwen the 420 pitch and 428 with the sprocket and chains. and what one do you recomend getting

[@AaronsEnduro]

428 is larger and stronger than 420

[@AaronsEnduro]

Good question tho!

[@zancudo7797]

Hey man i read one of your replies saying that if its too highly geared it could overheat your engine with trail use i am getting a 16 front and 24 rear witch is very high butttttt.... i have 10 inch, wheels i know size wheels more or less change gear ratio although would the stress on the engine be the same?

[@AaronsEnduro]

The wheel size will change gearing yes, and having the smaller 10” wheels will reduce the engine load. Not only will having too high of gearing create unnecessary load on the engine, but the clutch too. This is something that will cause increased wear over time

[@zancudo7797]

@AaronsEnduro I have a 14 and 37 at the moment but I have the stock 70 sprocket on it with my 125 and I think I do more damage revving out in 4th and revving such short 1sts and 2nds. in trails I'm always half and half 3rd and 4th but when I get on a straight the power will run and out and on the roads and straights I can't even hold throttle full for 5 seconds without having to go half throttle cause it's revving out I think it will really unlock the 125 power and make 1st and second gear useful with a much needed top end

[@zancudo7797]

6:15 this is exactly why im getting new sprockets. First and second is useless at the moment

[@nickunknown1987]

Do you have a link to the sprocket and other stuff you got?

[@AaronsEnduro]

www.ebay.ca/itm/262537041667

[@laj2243]

Heyyy please help !!! I have a RFZ 140cc 2021 what carb it’s the best for her ?

[@AaronsEnduro]

Vm24 mikuni!

[@AaronsEnduro]

Get a UNI air filter for it

[@laj2243]

Thanks my brooo !!!

[@AaronsEnduro]

No problem:) any questions, just ask anytime

[@AaronsEnduro]

Dont forget UNI Air filter oil and to apply it to the filter. ( only get the air filter if yours is an open air filter style) If you have the air filter that goes into a black enclosed box u don’t need it

[@MythicYetiiiiii]

First dirtbike/pitbike ive ever had. Im so use to riding street bikes i still try to shift to first down not up 😂 only thing i dislike about the x18

[@AaronsEnduro]

Agreed! Wish they had conventional transmission like regular Japanese bikes!

[@ReanWalt]

Did you know the new z20 max comes with 16 rear 19 front I wonder if they would fit on my 19?

[@AaronsEnduro]

The z20 max has an extended rear swingarm

[@AaronsEnduro]

It shares the same rear swingarm as an rxf model(not the rfz)

[@ghilleh4786]

love your videos dude thanks for helping me out a bunch! actually just ordered this 16 tooth today. gonna see if it will work with my stock chain if not no big deal im ordering a renthal chain soon :) anyways preciate you brother! youve been a huge help for me

[@AaronsEnduro]

Only happy to help! If you ever got questions just ask! Thanks for watching and supporting!

[@AaronsEnduro]

You should be able to see what chain pitch you have, its stamped in the side of one of the chain links

[@ghilleh4786]

@@AaronsEnduro oh shit thanks dude! Didn’t expect an instant reply on an old video. You’re literally top tier ❤️ much love thank you

[@AaronsEnduro]

I try to answer everyone! Welcome to the community!

[@judahaustell8263]

Sorry I'm so late but does this apply to Apollo 007 125cc as well

[@maryshan80]

The manual on these 125 cc says to adjust to 3/16 slack on top and bottom is that what you adjist tour chain to? Or a little more slack than that? Tks

[@AaronsEnduro]

Thats bout right!

[@BlueWhale5155]

Hi! Love your vids. I have two dirt bikes, but I use to have someone do the work for me. Im watching all your videos on how to make pit bikes faster and how to clean the carb because mine doesn’t start up after it’s sitting in my garage for I’d say six months. How do I know what gear size to get and how do I know what air filter size to get? Also, why don’t pit bikes have these mods already and what makes bikes able to handle all these upgrades? I would like to make it as fast as possible, along with learn how pit bikes work. I have a thumpstar 110cc and dr-x. Hoping you will be willing to answer my questions. You have a new subscriber.

[@AaronsEnduro]

Gear size us gonna be based on what you’re looking to get out of the bike.

[@BlueWhale5155]

@@AaronsEnduro but how do I know the center piece will fit? Like how do I get the size of the original gears middle part so I can buy one bigger and know it will fit.

[@AaronsEnduro]

So you’re looking for the centre spline size. Usually found in mm Every bike is different, so look up your bikes manual and see what spline shaft size it is and the pitch for the sprockets to match your chain size

[@AaronsEnduro]

We can go through it one on one if you wanted ,join here kzbin.info/door/cviyKZ2Vf3IHFliwebzODAjoin

[@BlueWhale5155]

@@AaronsEnduro “420*14T*Φ17 Engine small teeth” it says this for the spine shaft piece and this “14t x 43t = 428*108 Link Chain” for the chain, and it says this for the sproket “428*76*43 Sprocket” does any of this sound correct? I’m not looking to do this upgrade just yet because I’m a beginner, but I want to understand what all of this means.

[@bub9377]

Where's the follow up to this video wanting to see if the sprocket made a drastic change or just a minor one thanks

[@AaronsEnduro]

Watch my riding enduro videos and youll see that it helped out a lil until i got my big wheel swap

[@randycarrillo96]

Did you upgrade chain?

[@AaronsEnduro]

@@randycarrillo96 yes

[@randycarrillo96]

@@AaronsEnduro which one the 428?

[@AaronsEnduro]

@@randycarrillo96 go read what width sprocket/ chain set you have. its stamped in the chain

[@haydendontknowu]

I’m guessing that the bigger tires in the description also comes with the rims

[@billykhan5918]

Thanks this helped me a lot big difference

[@AaronsEnduro]

No problem man! Got lots more tips and trick videos on the channel! Check em out!

[@jlupemadeit]

Should I get 17 or 16 tooth for my 2020 Apollo 125cc? And I only need one when ordering from Amazon right?

[@AaronsEnduro]

16 tooth!

[@rileyscharapenko3604]

if you want to get a higher top speed by putting a different tooth sprocket on does it affect your acceleration?

[@AaronsEnduro]

It will! Youll loose some acceleration to gain top speed and vice versa

[@AaronsEnduro]

Only way to get more of both is engine swapping to bigger CC

[@rileyscharapenko3604]

@@AaronsEnduro ok thank you

[@AaronsEnduro]

If u need help with either let me know

[@senate9746]

@@AaronsEnduro i just got a db-x19 today. i definitely want more top end, what could i do? Already ordered the mikuni carb.

[@tonymendoza9657]

What sprocket size you recommend i change to on front or rear or both? If i want to set up my same bike for wheelies

[@AaronsEnduro]

14tooth front, stock rear gearing

[@tonymendoza9657]

@@AaronsEnduro well based on your video the stock one you replaced in front was a 14 tooth? So should t i already have a 14tooth on mine as well?

[@AaronsEnduro]

Likely!

[@aaroncounts6657]

I noticed the swap was on a 150cc what do you recommend for the Apollo 125cc do you still recommend it the sprocket with 17 teeth and what chain? Thanks

[@AaronsEnduro]

The gearing depends on where you ride!

[@aaroncounts6657]

@@AaronsEnduro trails in the woods

[@AaronsEnduro]

Go down one from stock in the front

[@aaroncounts6657]

@@AaronsEnduro okay thank you and I take it the opposite if I'm just using it in the backyard and the road or just dirt trails then I would go up to the 17 tooth sprocket. And I'm sorry what was it what chain did you recommend

[@AaronsEnduro]

Get both and try both! It’s cheap!

[@suelo7136]

What do I need upgrade so I can wheelie enough torque

[@AaronsEnduro]

Do you know what size you have on your bike currently

[@AaronsEnduro]

The less teeth on the front sprocket the more torque/acceleration you have

[@ayrtonrice]

Would the one you used work on the 150cc version?

[@AaronsEnduro]

Yep! I put it right onto my 150 when i got it!

[@pitbikehype5281]

What size is the bolt to get more chain slack the nut was a 12 but what's the bolt size?

[@AaronsEnduro]

Its a 10mmx1.0 i think

[@migitm]

Can you show me how to change the tire i havent rode my bike in weeks 💔💔💔

[@AaronsEnduro]

Three screwdrivers, or actual tire removal tools. Remove all the air from the tire, Break the bead on one side, (lot of brute strength, and then folding the second bead over is even “funner”) its a pain in the @$$

[@migitm]

Aaron Greenway Im tryna comprehend what to do but i have little to none knowledge about bikes so i know if i try to do what you said ima still end up in square 1 😭🤦🏽‍♂️

[@AaronsEnduro]

Id just take it to a shop then

[@ghilleh4786]

any chance you know where to get a plastics kit for these? i have the 2021 moddle and everything im finding is for the older ones.. i ordered some last week and they got here today but nothings matching up. seems like people are only selling the old plstics.. really i just need a rear fender lol guy i bought it from somehow broke it

[@AaronsEnduro]

Apollomotors.ca

[@ghilleh4786]

@@AaronsEnduro appreciate it!

[@lilljoe5096]

I have a 2014 apollo 125 007 I wanna do what you do

[@yadielrodriguez8013]

Where I can buy what you just put to your bike

[@AaronsEnduro]

Ebay.con is where i got it

[@aaronmullins8516]

Been looking everywhere for new plastics but don’t know what size or whatever to get. Reply if you know please lol

[@AaronsEnduro]

Apollomotors.ca

[@kevinlepage123]

Hey Eric is 1st and 2nd gear any better with gear change you take care my friend

[@AaronsEnduro]

Slightly faster

[@Skullguy-mh8wj]

Can you fit a 250cc or a 350cc engine on the Apollo? I’ve been googling and no answers

[@AaronsEnduro]

If its not a horizontal engine it wont bolt up. Look up the “4fittypitty” Guy swapped a crf450 frame into his apollo lol

[@1fiddysquiddy386]

Gonna have to do this on my 150r

[@AaronsEnduro]

10000% super worth it man

[@1fiddysquiddy386]

@@AaronsEnduro bet

[@salonenbeni3338]

ye but it gonna be hard do wheelie in speed

[@ryann754]

Did not think Is i would see you here

[@AaronsEnduro]

Who?

[@joelanes1129]

I’m trying to get the exact size for my makuni carb

[@pitbikehype5281]

Do you change your sprocket along with increasing rim size or do you just do one or the other on your bikes?

[@AaronsEnduro]

I had done both, but with the tall gearing and bigger wheels it bogged too much on hillclimbs . Ive since kept the big wheels,but whent back to a 14tooth front sprocket

[@deadduck6578]

Where ya from? Gotta be a canadian brother. East coast?

[@AaronsEnduro]

Canadian indeed! but we have big tree's where I'm from 😉

[@tyfunnyy]

keep up the good work my man

[@AaronsEnduro]

Appreciated thanks man!!

[@ModDemon125cc]

I have a 2020 125 RFZ I changed all my sprockets 17 front 37 rear but the carb sucks so bad and makes the bike run like garbage idk if I should get a carb kit rejet it or jus buy a new carb

[@AaronsEnduro]

@@ModDemon125cc get a genuine carb and itll run great

[@ModDemon125cc]

@@AaronsEnduro Yeuh that’s what I figured I have a 26mm mukuni or something but I think it might be to big

[@AaronsEnduro]

26mm is on the big side for a 125 I ran a 24mm and it ran sweet on my 125 and the 150 swap i did after

[@ModDemon125cc]

@@AaronsEnduro 24 huh 🤔 hm I am going to have to try this, thank you for the help 🤓 appreciate it 🫡

[@AaronsEnduro]

@ModDemon125cc i reached out to apollo motors and this is what they suggested to me! Worked great!

[@blackcoupe9878]

Hey Aaron I have an Apollo Z20max and a dbx18 and I’m gonna switch both front sprockets to the 17 tooth what size chain do u suggest the 420 or 428 and what length if u know?

[@AaronsEnduro]

If you’re bike is stock 420, youll nee 428 front and rear sprocket as well as the chain 428 stuff is stronger The chain to order is 120link

[@blackcoupe9878]

@@AaronsEnduro I appreciate that quick response bro I’m actually in the process now that was very helpful 🤙🏾

[@AaronsEnduro]

Hell yeah brother! Hope you get what you want :) thanks for watching!

[@AaronsEnduro]

Note that i do believe you need to pop like 2-4 links out of the 120 link ( which is normally what you do) The next size down at 110 link is too short

[@AaronsEnduro]

( i bought the and used 120 link)

[@ixceyyyonttv9953]

Can u do this on a Yamaha ttr?

[@AaronsEnduro]

Should be able to!

[@ixceyyyonttv9953]

@@AaronsEnduro bet

[@theseriesofeverything2903]

thats what i was gonna ask

[@AaronsEnduro]

No reason u shouldn’t be able too! Just make sure its the right spline and chain sized sprocket

[@theseriesofeverything2903]

@@AaronsEnduro ya i just got my dirtbike this summer and am kinda new to all this so thx

[@HellcatAdrian]

Did you have to buy a new chain to put this 17 tooth sprocket?

[@AaronsEnduro]

No, but its highly recommend to upgrade your chain from stock

[@HellcatAdrian]

@@AaronsEnduro should I get a 428 chain size

[@AaronsEnduro]

If you have a 428 sprocket set. Its either a 420 or 428 set. 428 is bigger/stronger

[@ianmacarthur1144]

i looked everywhere to see part 2 of gearing change - so did it go faster at top of 4th gear, and if so from what to what- thx.

[@AaronsEnduro]

I have a link in the description and pinned top comment for part 2

[@AaronsEnduro]

Gave me an extra 10-15km/h

[@ianmacarthur1144]

@@AaronsEnduro thank you, an increase like that would be plenty for me. that will be my next move....

[@AaronsEnduro]

Hell ya brotha!!

[@xrxckyx9210]

What oil do you recommend? I own a apollo 125cc d18

[@AaronsEnduro]

I have the oil i use linked in my description!

[@midsouth2strokes185]

Why did u get the little bitty wheels on it? They look so much better with regular wheel size.

[@AaronsEnduro]

Watch my newer videos and youll see i have the large wheels now

[@AaronsEnduro]

If you knew then youd know, but apollo screwed me over when they wrote there listings on the bike

[@midsouth2strokes185]

@@AaronsEnduro oh ok gotcha 👌

[@midsouth2strokes185]

@@AaronsEnduro I want that exact same sprocket. Do u remember where u ordered it?

[@AaronsEnduro]

@@midsouth2strokes185 linked in the description

[@itstraeee4029]

Could you do this with a xr70?

[@AaronsEnduro]

Yep! Just have to find what size width gear you have!

[@AaronsEnduro]

Then you can order the right tooth count and width to match your chain

[@AaronsEnduro]

Just dont go up too many teeth as the 70cc doesn’t have too much torque

[@trittany2882]

Loving your videos man I just subbed

[@AaronsEnduro]

Thanks!

[@ChanVlogs2x]

I have a 2020 set 125 should I get a 420 or 428 and 17mm right?

[@AaronsEnduro]

Not all the bikes are the same. Look on your chain for the labeled stamp

[@ChanVlogs2x]

@@AaronsEnduro ok I appreciate it

[@AaronsEnduro]

@ChanVlogs2x happy to help!

[@randycarrillo96]

If I get 17 tooth I need upgrade my chain if so which one

[@AaronsEnduro]

chains are linked in the description

[@ytpotion3593]

Does it work on 110?

[@AaronsEnduro]

Yep!

[@glockchicken8695]

What size is the stock x18 sprocket?

[@AaronsEnduro]

To my knowledge a 14 tooth

[@AaronsEnduro]

Ive linked the upgraded sprocket pinned to the top comment

[@anthonygonzalez4423]

I have an xpro 125 pit bike I wanna make it faster.... Can u help me....

[@AaronsEnduro]

Check this out: kzbin.info/door/cviyKZ2Vf3IHFliwebzODAjoin Then we can get in touch

[@TimTabb]

I own a bike exactly like this. It's a pretty good bike

[@BarraGutheWorld]

Have you had any engine problems apart from the carburettor

[@AaronsEnduro]

No, and ive “swam” with mine, banging limiter the whole 9. Just dont buy shit oil, and change it frequently (like every 10ish ride hours) buy an hour meter to monitor oil changes

[@marcelrl7747]

little late of a comment but I have a db-x4(110cc), what would you recommend for increasing top speed?

[@AaronsEnduro]

Never too late to ask questions on my channel! This gearing mod showcased in this video will be the easiest amd cheapest top speed you’ll get out of your bike

[@AaronsEnduro]

You could also get larger wheelset to increase top speed, but remember its a trade off, youll loose some acceleration to gain top speed

[@marcelrl7747]

@@AaronsEnduro thanks! i have a little one and was wondering why it topped out at 30, felt it was a little slow but I will definitely try it out!

[@AaronsEnduro]

Those two mods are going to the the only mods to increase top speed without doing an engine swap

[@marcelrl7747]

@@AaronsEnduro Ah nice, also where can I see he chain thing? I’m not sure which one to buy?

[@kaneharing]

I just bought a brand new pit bike RFZ i’m trying to make it faster how do I do that

[@AaronsEnduro]

Larger sprocket up front

[@pkgaming8530]

Is there a thing in the exhaust that makes it go slower that you can take out and then it will go faster?

[@AaronsEnduro]

Whats inside the exhaust can be two things. A silencer, or a spark arrestor

[@logiprime]

I have a 125cc Apollo quad would this work with the quad to?

[@AaronsEnduro]

Check to see if the sprocket is the same 17mm spline and then yep it should

[@logiprime]

@@AaronsEnduro cool I’ll definitely check

[@AaronsEnduro]

Thanks for watching!

[@gamerxxx4347]

Bro ginus book of world records for most times to curse in a vid lol

[@AaronsEnduro]

Sh!t boiii

[@dantelogan9519]

Like this dude 😂💯

[@AaronsEnduro]

🤘🏼🤘🏼

[@mohammedramirez3133]

Can you make a video of making both your wheels/tires the same size 17" and 17" ?

[@AaronsEnduro]

U cant fit a 17” rear

[@mohammedramirez3133]

@@AaronsEnduro of you extend the rear swing arm it's possible I've seen it done on an old Apollo model

[@ratdad48]

I've got a fuckin x pro x26. Just changed the 14 t sprocket to a fuckin 16t. Sadly of coarse lost fuckin torque and gained only about 9 mph . Good torque is good fun!

[@AaronsEnduro]

Torque is what throw’s you back in the seat!

[@AaronsEnduro]

Maybe its time to toss a 150cc in there!

[@ratdad48]

That's an idea. Will look into that. Like, will it fit and or bolt up the same way. Thanks for that. Wasn't even a thought!

[@AaronsEnduro]

Bolts right up! kzbin.info/www/bejne/bqjOl6irh8png6c If you need any guidance or 1 on 1 help for any modifications you can check this out kzbin.info/door/cviyKZ2Vf3IHFliwebzODAjoin

[@lilcasket9344]

Which one is better x18 or a 007?

[@AaronsEnduro]

From what ive seen , the x-18

[@r17380]

Will this work for a 2010 gio 125cc

[@AaronsEnduro]

Youll have to look into the specifics of what diameter inner cog you have ( for reference mines a 17mm)

[@r17380]

Aaron Greenway thanks

[@liljuicebox4750]

I have a dB-35 how can I make it faster or find better parts

[@AaronsEnduro]

Make it faster by upgrading your carn, and a higher front tooth sprocket count. Find parts at amparts.com

[@liljuicebox4750]

Aaron Greenway legend for this one I jus ordered a new carb because it kept bogging hopefully I can finally ride wit the friends

[@AaronsEnduro]

Makuni vm24!

[@liljuicebox4750]

Aaron Greenway they don’t have parts that I needed any other websites you suggest

[@liljuicebox4750]

Aaron Greenway ok i got the míkuni on my bike and when I kick it it idles for a solid 5 second than dies I need some help on what to do

[@OhThatsLeek]

You ride hard probably time to get the z20 it hold up way better in the conditions you ride in the Rfz isn’t really made to be beat on

[@AaronsEnduro]

Got something even better planned ;)

[@OhThatsLeek]

Aaron Greenway oh yeah can’t wait man I’ll be tuned in

[@AaronsEnduro]

Keep ur eyes peeled 👀 working towards our goal as the channel grows

[@yadislifestyle7225]

What was the name of the item you installed into the bike?

[@AaronsEnduro]

A front gear sprocket! Link pinned to top comment

[@roanallen1382]

Does this work on the venom ?

[@Evergreenlandscapingandengine]

My only concern is if it picked up torque or decreased the torque bc I want to do some real riding, it would be very helpful if you could let me know

[@AaronsEnduro]

Sorry what exactly are you asking?

[@Evergreenlandscapingandengine]

@@AaronsEnduro basically if it lost torque it will bog down more on hills and if it gained torque it will be easier for it to do hill climbs or get to its top speed better like on the take off ( 1 gear it won’t bog down as much)

[@AaronsEnduro]

That is correct. Its a trade off. What do you want more. Torque for hill climbs, or just overall top speed

[@Evergreenlandscapingandengine]

@@AaronsEnduro I would like better top speed but I need lots of torque because I ride in sand and do a lot of hill climbs

[@AaronsEnduro]

Then i would if anything just try going up one sprocket size in the front. If it feels better then leave it. If you miss the torque, go back to your original sprocket. Its like 15$ for a sprocket

[@chrisfred5234]

How tall are you and do you think your 125cc is good for your height? Love the vids btw

[@AaronsEnduro]

Im 6ft 1” its a great size to learn on, but its towards the small side of things. Keep it mind it is a pit bike after all

[@EnduroTravelR]

another awesome video dude!

[@AaronsEnduro]

Ayy thank man!!

[@EnduroTravelR]

Aaron Greenway 🤙🏼

[@bruzza2532]

Anybody see the new sprockets for racing for one sprocket is flat on one side the next sprocket is flat on the other side it cuts the dirt right out of your chain

[@AaronsEnduro]

Never heard or seen that! Thats neat!

[@OTMTR3]

I want to put a bore kit for my Apollo x18 do you know which one I need I want it to like a 150

[@AaronsEnduro]

do you know how to to do the big bore kit work yourself?

[@OTMTR3]

@@AaronsEnduro yes and if not my dad would help me

[@AaronsEnduro]

Its a lot of work, for little saving. Id buy a 150cc engine for little more swap it in, and use ur engine for a project build

[@OTMTR3]

@@AaronsEnduro true but I just wanted to learn how to work on this little engine my self that’s all

[@AaronsEnduro]

Tbh its a lot more to you think you need to do. And just for the fun of learning is fair but im not not 100% on a kit. The cylinder size was different than the generic china one

[@Jaaay.x01274]

What is the size of ur back sprocket?

[@AaronsEnduro]

Stock! I think its a 52?

[@Jaaay.x01274]

@@AaronsEnduro okay cheers 👍

[@Jaaay.x01274]

@@AaronsEnduro any chance do you know how to sort out high idle on pit bike also the bike won’t go into gear the bike freely moves when I put it into gear

[@AaronsEnduro]

Heres a video for idle issues kzbin.info/www/bejne/aaO2pH-EqtSsZrM And heres a video for your gear/clutch issue kzbin.info/www/bejne/l2qZo399r9uCrpI

[@Jaaay.x01274]

@@AaronsEnduro👍👍👍

[@sebastiansaenz3649]

Did this blow up the bike? Or damage it?

[@AaronsEnduro]

No

[@AaronsEnduro]

Completely irrelevant issue

[@geegee9183]

the coolster pit bikes don’t have the ability to slack it. i bought a 17t sprocket but can’t install it. it sucks

[@AaronsEnduro]

Could probably run it if you got a longer chain

[@geegee9183]

@@AaronsEnduroi have done that too, i just keep snapping chain when i try to install it

[@kloutmafia5078]

Where do i get one

[@AaronsEnduro]

Links in the description!

[@jaredgallegos9573]

my z20 max has a 14 tooth what should i get?

[@AaronsEnduro]

What wheel size? 16/19?

[@jaredgallegos9573]

@@AaronsEnduro yes

[@AaronsEnduro]

Tbh with the giant wheelset id leave it with the 14tooth with only the 125cc

[@AaronsEnduro]

Could maybe try a 15 tooth if you wanted to ( since its cheap to try anyways)

[@jaredgallegos9573]

@@AaronsEnduro alright thanks

[@lilljoe5096]

Where can I get this?

[@AaronsEnduro]

linked in the description 16 tooth front sprocket - amzn.to/30trEMD

[@ilovecheesecake516]

this will make first gear longer right??

[@AaronsEnduro]

Yes! It makes every gear longer