How to Fix External Hard Drive Not Initialized

[@rikoflishas]

yeah, nothing worked

[@arbesterrebereb]

kzbin.info/www/bejne/bpTYfYh5et2Km80si=e1aTdTJjtSDmH7vg

[@arbesterrebereb]

Try that if you have check redundancy error

[@arbesterrebereb]

Note that you will lose some files but I didn’t let it finish for 100% erasw but worked

[@artacrosstheuniverse]

I don't think I've ever had something run as poorly for no reason as the partition assistant did, anytime I clicked on disk surface test it did nothing and would almost crash constantly even when I wasn't doing anything on it

[@nathankent91]

Mine was the 2nd case, it works perfectly by simply readjusting the drive to cable. Much thanks

[@hadiprinting4398]

Hi

[@thiagovieira5925]

this is NOT a freeware. You will install, then it will show up the windows screen to proceed on acquiring an extremely expensive license to run with it.

[@zzww0]

If you Google it, the second link literally says "download for free" and gives an OPTION to pay for pro.

[@Julayla]

The details help me, though my part when I tried to do the disk management part when I tried to do the MBR part gave me a "Data Error (cyclic redundancy check)" message and I'm not sure how to fix that part.

[@sairahcristino907]

I have the same problem. Were you able to fix your hdd external?

[@jobsjobs6256]

@@sairahcristino907 hi, same probelem. did u fix urs guys?

[@rajlkatrodiya]

Your are life saver mate....software updates work for my external hard drive... Heartly appreciate... Thanks,

[@Raven777777777777777]

Guide is nice but unfortunately none worked for me. When i try "Situation 2 - Method 2 Check Bad Sectors" it doesnt do anything. For other working drives surface test window opens but no reaction or error for broken drive and previous fixes didnt do anything than pop error every time. Disk part show that drive 5 which is broken one is online but nothing works. I've tryed couple of things in that app of yours and it replyed with errors 6 and 45 and i got nothing. One thing i didnt try is switching to another cable but since i dont have any other cables to try im boned on that one for now. Im gonna try accessing that drive from windows install program and i might try rebooting into that screen where you set up for windows safe mode (good old times when it was accessed by F8 right after bios) tomorrow but something tells me that wont work either, i guess that 2TB external drive is gone for now.

[@PIUEEDahod]

i have the issue? diskpart has encountered an error: data error (cyclic redundancy check) pls. help me out?

[@danielfennock3707]

So I rebuild MBR with Aomei partition and it fixed this error, excellent video!

[@Shadow_Company1]

This method caused a data loss to me

[@MCA__c__soham]

is there any data loss in your drive??

[@Vicky-zd3uv]

fixed with this tool, "repair mbr" worked

[@kemem8940]

Repair or rebuild?

[@Vicky-zd3uv]

@@kemem8940 rebuild

[@hazielpax2290]

any data loss?

[@Ak-hudegin]

@@hazielpax2290 did u find a solution?

[@DARKSLIDERSPUBG]

How to fix this problem i don't mind if i lost my data

[@worldwidetechnique8238]

When I tried initializing in diskmgt shows an i/o device error on my external drive (luckily). Will rebuilding mbr get the disk back online with all the data intact though.. if not, whats a good unpaid data recovery software

[@Meanboy.]

How can we fix this

[@Aramalisadventures]

After Initiliazing my external hard disk and trying to convert it either to MBR or GPT, it gives me an error: "The request failed due to a fatal device hardware error" - what to do now?

[@AOMEITech]

www.diskpart.com/articles/the-request-failed-due-to-a-fatal-device-hardware-error-0310.html

[@javasrevenge7121]

I have the same issue.

[@javasrevenge7121]

@@AOMEITech It is not FREE.

[@NeseComedy]

Sadly the drive does not show in your Software and I can't do anything in diskpart because it thinks it has a size of 0 bytes. The only tool that sees it correctly is testdisk, but there I can't write anything either. The problem was the result of an empty battery during a full format using windows Partition Manager, so I don't need any data back. Is it possible that the hardware got damaged due to the sudden power loss during writing?

[@AOMEITech]

It is possible that your disk is a little damaged due to the sudden power loss during writing, Here my suggestion is to try to fix it by running the CHKDSK command and if it is not working, then try the methods in this article. www.diskpart.com/articles/sandisk-usb-repair-tool-7201.html This article is not only suitable for SanDisk but also for other branded disks.

[@abhijithmahipalm3367]

For me when opening disk management, its not opening. Just showing opening Virtual Disk Service. Once it got opened, then I tried MBR for initialization, also GPT...in both cases semaphore time out happened...what to do...need help guys

[@kangbayan8242]

Up

[@abhijithmahipalm3367]

What does that mean

[@itadobe]

This Video will help you: Search for: How to allocate Unallocated disk two 2 methods to Fix USB flash drive practical Urdu Hindi "ITandTourism"

[@themyronc]

I got the disk to come online but still getting the cyclic redundancy check when I convert to mbr or gpt

[@satishgunjal3803]

Same issue but what the solution for that ?

[@lauryn1111]

you saved my disk, rebuild mbr worked for me nice tutorial.

[@rubyzeng9017]

You explained everything in detail that is nice and fixed my problem.

[@shinchan_gaming9709]

The request could not be performed because of an I/O Device error this was showing in my laptop what i have to do

[@Thefristrealtywiver]

Me too Bro did u fuond the problem?

[@shinchan_gaming9709]

@@Thefristrealtywiver no bro

[@Thefristrealtywiver]

@@shinchan_gaming9709 I think it is a hardware problem

[@shinchan_gaming9709]

@@Thefristrealtywiver maybe bro of you find any solution please share with me bro

[@Thefristrealtywiver]

@@shinchan_gaming9709 sure I will go to a specialist tomorrow and I tell u the problem

[@byroncos]

Thank you so much I solved my issue... Once you see online right click on your disk then create a new partition select xFAT then next... OS: Windows 11 Drive: SanDisk SSD Plus 1 TB

[@danmolition7221]

I really appreciate sharing this I’ve been trying to connect my drive back to my pc after I had connected to my Xbox. Can you also suggest any videos about connecting a external to any Xbox consoles but to include recognizing the drive back to the pc? It would surely help a lot

[@AruanaACN]

Thanks so much for your tutorial, but unfortunately it didn't help. I was looking for a solution for my 2TB Seagate Portable HD which stopped working. It's beeping and it shows "not initialized" plus "unallocated" on Disk Management. Also, Disk Management doesn't show its capacity properly, like it was 134217728 GB. When checking it on AOMEI Partition Assistant, it shows 0KB and 0 partition. The program shows an error message when trying to recover this disk. Nothing happens when I click on "surface test".

[@Tellin08]

I have this same exact problem with same weird capacity number for the same external Seagate 2TB HD. If you've figured out a solution, please let me know.

[@AruanaACN]

@@Tellin08 Didn't find a solution yet. Did you?

[@Tellin08]

@@AruanaACN I tried taking the portable shell off the HDD itself where the sata and power outlets are now exposed but I think I may have messed it up more. It won't even be detected on any level now and instead gives a beeping sound. Be very careful in taking the HDD out if you choose to do it. It was more difficult than I thought it would be. I haven't yet :( The only solution I think is to send it in for an expensive repair. I'm considering Luis Rossman because they seem the most honest.

[@raiyaanbawany2637]

Samr

[@raiyaanbawany2637]

Plss help me plsss

[@oiTzFLeTcHo]

This video was an absolute life saver! Thank you so much!!!

[@jenniequintao1685]

Hi, I want to ask is it possible i got this error because my enclosure i have here can't manage the storage capacity greater than 2tb? I have existing 3.5 HDD enclosure for my 500gb hard drive but as soon I plug my 4tb hard drive in my enclosure I got this error “Disk 1 Unknown Not Initialized” without showing disk capacity... I'm planning to buy another enclosure for my existing 4tb hard drive that can handle storage capacity greater than 2tb and use it for as external hard drive for personal storage but I was hesistate a bit because i might encounter another error like this again, enclosure for this type of drive is pretty expensive here so I want to make sure if that is also a cause ... thank you.

[@AOMEITech]

Not very sure, I need more details plz. Which kind of enclosure are you using? And is your 4TB HDD a brand new disk(haven't been initialized before)? Is this HDD in MBR partition style?

[@KaibamanYT]

So I dropped my EHD earlier today and didn’t think much of it. It’s wasn’t that bad a fall but it’s showing this error and I’m trying to figure out why it’s not readable. The cord works fine and it’s showing power but it isn’t doing the blinking thing as it’s starting up. It’s just staying on powered on.

[@ssnow4505]

I converted my internal HHD to external HHD using the converter case. Its not accessible but its showing as Unallocated in Disk Management. Can I use the same method shown in the video to access the data on it. *There is very important data on it.*

[@AOMEITech]

If you initialize it, it will cause data loss. But I'm not clear with your disk status, you'd better send your issue to AOMEI support team via email with a screenshot of your disk's status.

[@righttime9445]

Wow 🤩 you are great. Your method of explanation so good. I am from Pakistan 🇵🇰.

[@frostbitefilmsproductions6943]

Not working it says when click proceed it says "I/O device error" . What that means ?

[@AOMEITech]

When you try to initialize a hard drive via Disk Management and receive an error message such as “This request cannot be completed because of an I/O device error” or “The device is not ready”, the usual cause is that there is something wrong with the hard drives connection cable. You should adjust the drive's connection cable and try to initialize it again. Where possible, we recommend connecting the hard drive to another computer to see whether it is able to be detected and initialized.

[@ahmedsabd]

Kindly advise me I have downloaded aomei and rebuild mbr the hard disk is making the program a deley while opening additionally after building the mbr the hard disk shows up normally on the program but not on my pc for a short time and again back to the same problem The hd is not clicking or making any noise it runs smoothly but flashing a lot

[@AOMEITech]

I afraid I cannot precisely know what caused this issue without any detailed info of your disk's status, you are sincerely suggested to provide more details about your disk's status with us so that we can help you figure this out, please contact our support team via email to get further help.

[@deathstrokeTT]

You are a life saver. Was able to initialize my wd passport finally with the disk part steps. Thanks a ton bro.

[@JeanneNirere-wt8sq]

How it's working for Me it's not working help me please

[@deathstrokeTT]

​@JeanneNirere-wt8sq I did steps from 3:23 onwards and it worked for me.

[@Cloudxxx23]

3:40 Hi. I used the diskpart. It's online but showing zero GB. What should I do?

[@oEZ2CYo]

Shut down your PC and use a fine tool, such as a needle, to clean the ports on the hard drive and both ends of the connecting cable. After leaving the PC powered off for a few minutes, turn it on without the drive connected. Once Windows has fully loaded, reconnect the drive, and it should appear normally. If it’s an internal SSD, leave it disconnected, power on the PC, then shut it down again. Reconnect the SSD and turn the PC back on to check if it is recognized.

[@keyiwan5947]

Thank you so much aomei, this one really saved my issue which troubled me so long.

[@RB_MOBILE_REPAIRING_CENTER]

Data risq

[@Beef_jerky_official]

@@RB_MOBILE_REPAIRING_CENTERwho cares as long as it starts working again

[@md.mahmudulhasan9141]

I had an hdd with not initialized and 100% free disk space on the disk as shown. But the AOMEI could not perform the rebuild mbr function. If I perform wipe data or create partition on the disk by aomei, it shows error code 202 and can't perform the operation. Do you have any ideas?

[@AOMEITech]

You can directly initialize it in Partition Assistant or Disk Management since its an empty disk.

[@ShepherdAr254]

Hi, My External 4TB Hard drive shows ''unknown'' and ''not initialised'' . It doesn't show anything on the volume. It doesn't show on ''This PC'' . It indicates '''Data error(cyclic redundancy check'' when i try to initialise. Kindly help.

[@AllenCisnerosOfficial]

Hey I was wondering if you were able to find a solution? I’m currently in the same situation and I have lots of important files there :(

[@zap9162]

@@AllenCisnerosOfficial did you ever solve this?

[@AllenCisnerosOfficial]

@@zap9162 nope I just gave up and bought a new external, I got recommended the SSD Sandisk

[@xx3868]

Hi, my disk shows up as 8 in disk management unknown and wont initialise when try to MBR ir , but per your video in CMD list only 1-7 show, not 8 so not sure what to do ?

[@AOMEITech]

Sorry I didn't get your words. What do you mean that only 1-7 shows not 8?

[@kftham8728]

Excellent. 👍 Thank you very much. Looking forward for more great tutorials especially on AOMEI Partition Assistant😊

[@adarshshenoy0623]

Situation 1 disk management does our data get formatted or deleted when we when we initialise the disk (when unlocated)??

[@AOMEITech]

Yes dear, it will cause data loss if you directly initialize it.

[@kennyjohnson4764]

I used the aomei backupper. While cloning it all my os from hdd to the new ssd. Then it happens to be uninitialise and unable to do anything to the ssd. I need help

[@salehali8744]

Thank you my hard drive is working after installation of the program .

[@khadimmbacke37]

Thanks man, this video truly helped me ❤

[@0xxhomie981]

worked for me, thank you aomei

[@nihill4048]

will method 1 work if my external har drive has badsectors and can i access my data after method 1 ?

[@wasifrock687]

In method 2 when i choose one of the option between mbr and gpt it says data error(cyclic redundancy check) Pls help me in this

[@AOMEITech]

Hi dear, check this out: www.diskpart.com/articles/diskpart-has-encountered-an-error-data-error-8523.html

[@itadobe]

This Video will help you: Search for: How to allocate Unallocated disk two 2 methods to Fix USB flash drive practical Urdu Hindi "ITandTourism"

[@jonathancabantog3054]

Sir in the AOMEI software i couldn't find the Rebuild MBR menu? I thinks the new version. Can you help me sir? Thanks

[@AOMEITech]

Hi, this feature is in AOMEI Partition Assistant, did you download this one?

[@afrinetpictures8020]

Please can you write down what you typed during diskpart process... Thanks

[@hunterjoy4346]

Thank you this saved my day, this is a nice tool.

[@BscKmajhi]

are you the ower of this software? I saw your photo on their website.

[@ketanshirodkar5775]

After using the Rebuild MBR method, I got the Congratulations.... Prompt. But in dismanagement, Disk 1 is still being shown as Unknown and not initialized. Pls advise

[@AOMEITech]

Then you can only initialize the disk directly.

[@ketanshirodkar5775]

@@AOMEITech If I click on Initialize, I get the message 'Access denied' in Virtual disk manager. What can be done now?

[@AOMEITech]

@@ketanshirodkar5775 answers.microsoft.com/en-us/windows/forum/all/virtual-disk-manager-access-denied/ae295766-9a1d-4163-a6b6-80325094399f

[@ketanshirodkar5775]

I have already tried this. Takeown command doesn't work

[@Vizrart]

in diskpart it fails to clear disk attributes for me. it shows its already online, but in disk managment it appears as not initialized and offline?

[@AOMEITech]

You can try to rebuild the MBR of the disk using Partition Assistant in the video to see if this would work.

[@FarrukhZeeshan444]

i applied every steps which you told us but i got the error "The Request could not be Performned because of an I/o Device Error"

[@HASSANALIuniqe]

What music you are using in your video kindly i need the name

[@jamisonsmith9059]

appreciate the fix. been fighting this for 2 hours.

[@parolesparoles]

Method 1 just saved my data. Thank you a million times 🙏

[@Shadow_Company1]

This method caused a data loss to me

[@parolesparoles]

@@Shadow_Company1 I think whatever the method on hard drives, there's always a data lost risk involved be it a little percentage. So sorry for you

[@debbiew8771]

This video itself was great, with crystal clear instructions. I especially liked how you gave the time to start for the individual problems. However, I downloaded your software and it wouldn't do anything when I clicked on surface test. So it was all for naught. Thanks anyway.

[@AOMEITech]

Hi dear, did you mean this function did not work for you or the result showed nothing to you?

[@09shirish]

@@AOMEITech The software want copyright message ! What can we do for this problem ! Thanks for your valuable guidance !

[@mirzaaliulrazib6229]

@@AOMEITech I am try but red mark didnt removed and not worked please help

[@AOMEITech]

@@mirzaaliulrazib6229 What is the status of your drive please?

[@jmo5604]

my 1 tera bit is HDD is " read-only" how to fix that ?? ! and your AOMEI was helpless and he cry 😭 😇

[@Havocsouls004]

Have a scenerio where disk is unallocated and cant initiate drive with fatal disk hardware error been trying all day to fix it to see it itll operate but no luck ive tried disk management diskpart uninstall drive disable update driver which just gives me the statement of im already using recommended driver so any tips

[@lotfilataoui7457]

It's a very excellent explanation

[@GCHverse]

ive try with disk management,but when i choose mbr there is an error said "access is denied" how do i fix it ?

[@Chatur-bate]

plz help me bro I was Installing window in a new ssd after it is done my Other hdd converted to unallocated, but there is almost 700gb data in it. Now how to do so that i get all data

[@OscarDanielZarcoGonzalez]

I openly recommend this program, it is very good!!

[@felicitybrown368]

this is really helpful video, only one that worked for me, thanks aomei.

[@kingdams111]

Im so happy this video solve my problems♥️♥️♥️♥️

[@AOMEITech]

Also happy for you here!

[@rionahlim8797]

What if my external drive has damages after trying the surface test? Is it possible to be fixed? :( My drive is connected because it blinks and makes the "connected sound" whenever I connect it to my PC but it cant be recognized.

[@AOMEITech]

Hi dear, if it is logically damaged, you can reuse it after rebuilding or reformatting it; if it’s physically damaged, it means that it has lost the ability to write and retrieve data forever.

[@kazirehan]

I have 250gb Seagate hard drive I had swap pcb and also swap bios but it shows as 0 disk unknown not initialise. On right click it give option to initialise with MBR and GUID. What will happen of I chose MBR will it initialise and I can see data? Without loosing data? Pls assist.

[@AOMEITech]

If you click "Initialize" it will cause your data loss, you are suggested to try "Rebuild MBR" first.

[@Gamerx123]

hey my problem is when i start computer it shows hard disk in startup but i cant see and use hard disk in my pc and in disk management, the files are still there for eg if i try to open the app which was in that disk it says: windows is searching for needforspeed.exe locate the file yourself by pressing browse, and on some apps it says application not found, plz help:(

[@AOMEITech]

Hi there, I've never met or heard of an issue like this before. I think the issue may be a disk error. You may look for a local repair shop and ask for advice or you can try to contact the manufacturer or the outlet of your computer.

[@Gamerx123]

@@AOMEITech oh ok thnx for reply Oh and also do you know anything about paging file, when this problem started now when I start my computer it says Windows created paging file...

[@LocomanDC]

aoemi software is amazing dude u a life saver hope everything goes well🙏🏿🙏🏿🙏🏿🙏🏿

[@Maher-]

attributes disk clear readonly, I got failed to clear disk, how to fix that? when I tried to convert convert mbr DiskPart has encountered an error: A device which does not exist was specified. See the System Event Log for more information.

[@sweejus17]

Great content! Useful and helpful

[@AOMEITech]

Thank you for your support dear!

[@kevinmkraft]

My computer can't read my EHD. But at the same time, it tells me that it is functioning properly.

[@Aarminmusic]

I have the same problem, did you find a sollution?

[@kevinmkraft]

@@Aarminmusic No, I didn't.

[@Aarminmusic]

@@kevinmkraft I found out my one of my SSD drives had exploded inside, i just bought another one.

[@cooliooilooc5793]

Hello, when I rebuild the MBR, all is ok, but there is one thing i don't understand, I have a 4To external Western Digital Red Hard drive but on windows i can see that there is more than 4 with 3 partitions of 1.96To ?!? when you rebuild the MBR how can you see the external hard drive, i need to attribute a letter or... what's the next step ? thank you

[@AOMEITech]

Do you mean how can you tell which drive is your external one? You can tell by their drive letters.

[@cooliooilooc5793]

@@AOMEITech nope i just mean when i build the MBR what's next step because i can't see with my C:/ drive and when i want to add a letter to it and mount it, the option is grey but the MBR was built successfully

[@Technical_guru25]

I have use the suggested software to initialise the external hdd. but it shows the error as data error ( cyclic redundancy check). how to solve it

[@AOMEITech]

kzbin.info/www/bejne/rnOvlZ-rodlkZsk&t

[@zeenars]

during surface test red blocks are showing.... is there any way to rectify if the disk is damaged?

[@AOMEITech]

kzbin.info/www/bejne/d4LPg6KFmJafgrc&t

[@CheebaTimeTv]

Im using a external hard drive I haven’t initialize it. But in disk management it show as online. Has this been done automatically?

[@AOMEITech]

If you can access this drive on This PC then it had been initialized already.

[@fergusonfindablezjepz1143]

Hello, I have very² important data in a HDD & am facing big problem. Total size 360gb but the size is show 0mb & it's saying initialize the disk. I initialize the disk and got error fatal message.... following all the step provide with CMD diskpart, Aomei tool, testdisk tool, etc still not working for me. Advice...🙏🏼

[@AOMEITech]

www.diskpart.com/articles/the-request-failed-due-to-a-fatal-device-hardware-error-0310.html You can try the methods in this article some of them may cause data loss. But that's the only way to get your disk back to normal.

[@raendra779]

with the same case as the video above. but my hard drive capacity does not match. my hard drive capacity is 1 TB but it reads 131 TB, how do I fix it?

[@AOMEITech]

It reads 131TB? Are you sure it's not 131GB?

[@zennify0]

thank you 2nd step works fine for me thanks for all the help

[@harshlpro7190]

I appreciate your work and my hard disk was fixed data is not lost

[@gbolahanmiafolabi9659]

Hello, I'm just downloading the software but i can't find the rebuild action button

[@Miraculous_Ladybug_India]

My disk is visible in disk management but not in amoei partion assistant 😭😭

[@AOMEITech]

🤣Have no idea about that either.

[@sak0360]

Please nothing worked for me help

[@barikarizquna9228]

I've done the step 1, and it turn into basic mbr, but it is still unknown, not initialized, unallocated, even it shows the volume. I did step 2, and found crc, and when I attribute disk clear readonly -> diskpart failed to clear disk attribute

[@barikarizquna9228]

I haven't used the hdd for like one year before it's happening

[@AOMEITech]

Did you try disk management and click initialize directly?

[@rigisk2514]

On partition assistant, on disk 1 its written 'Disk unreadable'. nothing happens when i do surface test. Please help.

[@AOMEITech]

What is the status of your disk, please?

[@rigisk2514]

@@AOMEITech External HDD suddenly stopped showing up on system. Did wire test its fine. No physical damaga. It was making beep sounds a week prior to the incident

[@RabiKatuwal]

Now my disk is online and unallocated. Can i recover the data ?? Please guide me to recover my data

[@studiomeetbhadra961]

Yes

[@AhmedAli-gh8lb]

u can only use recovey software to recover the data do not try anything else otherwise your data will be deleted

[@sitamarlina]

is it normal that the restart progress after rebuild mbr took long?

[@satyanarayan1200]

It's really works.Thanks for this information.

[@ezzmoharam1933]

Still not working...my external hdd's size is unknown and not intialized when i try to intialize it from AOMEI or disk mangement it says:"A device which does not exist was specefied" What should i do?

[@AOMEITech]

Hi FUZZYY, I'm not sure about this issue either, so I found some articles here, hope they can help. appuals.com/a-device-which-does-not-exist-was-specified/ thegeekpage.com/a-device-which-does-not-exist-was-specified/

[@davidwaluta3219]

So I did the disk surface test and my hard drive had some damaged sectors. Can you help?

[@AOMEITech]

Of course, please send the screenshot via email to the AOMEI support team to get further help.

[@mewaelhaile3977]

I try both steps but still is not working it says "data error(cyclic redundancy cheek) in the second step disk management please do have idea concerned the case. N.B transcend...

[@AOMEITech]

www.diskpart.com/articles/diskpart-has-encountered-an-error-data-error-8523.html

[@rutvikkapadiya353]

hey same problem i have got any solution?

[@AOMEITech]

@@rutvikkapadiya353 Check this out dear! www.diskpart.com/articles/diskpart-has-encountered-an-error-data-error-8523.html

[@suzettepansegrouw1395]

I have a data error (cyclic redundancy check) what to do with that? 😢

[@abdulrahimj1442]

I have a same problem in my internal secondary HDD. May I try this same process?

[@AOMEITech]

You can try to rebuild MBR first it will not cause data loss.

[@asadbruh2555]

when i convert it to MBR it thru device manager, it says incorrect function

[@itadobe]

This Video will help you: Search for: How to allocate Unallocated disk two 2 methods to Fix USB flash drive practical Urdu Hindi "ITandTourism"

[@gamechain8232]

I have important data in my external hard disk is it safe to use tool aomei

[@Vicky-zd3uv]

So I converted the disk and plan to move the os to ssd so I can boot from it and save other data on hdd, I cloned successfully with partition assistant.

[@sohbi84boussaadi]

Thank you for this effort that you are doing. My question is: aomei partition program, is it the free or paid version?

[@AOMEITech]

It has both two versions.

[@ajohn4320]

This is awesome! It worked for me.

[@mdmosharrofhossen6053]

Thanks brother. Your video is very amazing. Sometime, I watch your video and learn some. Your software is very good. I am from Bangladesh.

[@AOMEITech]

Thanks for your support, you are the one we really appreciate.

[@mdmosharrofhossen6053]

💛💛💛

[@earlchesterrasco4031]

Thank you so much. This helps a lot.

[@AnnkurKumar]

How to save data, if wants too. Which method to choose from the three stated.

[@AOMEITech]

If you initialize it you will lose your data, you can try to rebuild MBR to see if the issue can be fixed. If not, you can backup your disk and restore it after initializing.

[@AnnkurKumar]

@@AOMEITech how to get it working...

[@AOMEITech]

@@AnnkurKumar Here are the details dear, Download AOMEI Partition Assistant. Right-click on the disk that is not initialized and choose "Rebuild MBR", click "Apply" and "Proceed" to execute. Then check if your disk is normal now in disk management. If not, download AOMEI Backupper, click "Backup" and "Disk Backup", go to Disk Management right-click on the disk, and choose "initialize disk". Go back to AOMEI Backupper click "Restore", choose the task or the file we just made, and follow the guide to finish the restoration. AOMEI Partition Assistant: www.aomeitech.com/llyy/download/aomei-partition-assistant.html AOMEI Backupper: www.aomeitech.com/llyy/download/aomei-backupper.html

[@sureshotshorts1207]

Hi , my second disk drive keeps disappearing after 3-4 mins of booting from both "device manager" and disk management, so i cannot select my drive in your software, It is detected in bios, any solution 😢?

[@AOMEITech]

Hope this will help: answers.microsoft.com/en-us/windows/forum/all/hard-drive-disappeared/7eb04d19-2e85-42a1-86c3-00c71cf316c7

[@robertgabrielcroitoru2495]

Hey i got an 960 Kingston ssd. I tryed to change cables and it still says i/o error.. I really dont know what to do more...really..

[@AOMEITech]

Hope this can help: www.diskpart.com/articles/unexpected-io-error-has-occurred-1984.html

[@dank9625]

hello, great vid but what should i do if the error says "data error (cyclic redundancy check)"

[@AOMEITech]

kzbin.info/www/bejne/qZLVcoOAqcyMaq8&t

[@rb9503]

Hi I tried this. Hard disk works fine but everytime I plug it into my pc, it asks me to initialize and formats everytime. Any solution?

[@AOMEITech]

You can try to rebuild MBR with AOMEI Partition Assistant to see if it could solve this.

[@joecason6792]

I have a problem with this as well ... After i used the first option, it still showed uninitialized albeit online.... I tried using attributes disk clear... that didn't work, formatting didn't work as well... It showed i/o device error

[@joecason6792]

Please help

[@AOMEITech]

Can you initialize it directly in Disk Management, right-click on the partition and select initialize.