How To Fix Glasses Loose and Slipping Or Glasses Too Tight!

[@mmo6723]

Such an easy repair. I have been cussing everything and everytime they fell off my face for the last year.

[@ThatGlassesGuy03]

Ouch! I tell ya a slipping pair of glasses drives me almost as mad as a crooked pair 😅. At least you know now! 😁

[@billyblack1137]

I feel you bro

[@HEXSiN420]

Bruh u just spoke my words they been falling off my face at work or I would get water on em an it just uuuugh I been cussing up a storm over it

[@AKB35955]

That is me right now! Lol

[@hassansaleban343]

9999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999999"

[@dynamic_spirit_17]

You have saved my life actually ❤I was very stressed by my slipping glasses. I tried this before three hours and now feeling free. Thank you for this simple and efficient hack. In my friends circle we say people like you who are giving simple solution for the biggest problems are the reason for rain in the country 😅Now it's applicable for you also. Thanks again from heart 💞💞❤

[@ThatGlassesGuy03]

This may be one of the most heart felt thank yous I have recieved. Thank you, this made my day 🥰

[@dynamic_spirit_17]

@@ThatGlassesGuy03 You deserve man❤😇Keep going💞🔥

[@cwarner1911]

Absolutely amazing, new glasses have been driving me crazy, and after watching you video now sitting straight and not slipping down my face, like others have said have watched other videos with no luck, just generic stuff that appears they found on the internet, you obviously know what you're talking about and have experience! thanks so much!!

[@ThatGlassesGuy03]

Glad this was there to help you 🥳. I've definitely been around a "few" fittings 😂

[@Pariattt]

I was living a hopeless and painful life before watching this video. My loose glasses were falling all day long and I just couldn't resist it anymore. Now that I've followed this tutorial my life just went straight and beautiful again, my days using loose glasses are over. I think I'm joining Greenpeace or something like that, I want to spray joy all over the world

[@ThatGlassesGuy03]

How joyous an occasion. 🥂 bards shall surely write memoirs of this event! 😎

[@tannerteevsb8963]

Hey! So my glasses have been getting weaker since I've had them, when I first got them it took a little bit of effort to close and open them, now if I just hold it the other way they fall closed or open

[@ThatGlassesGuy03]

If it's a spring hinge, they're likely getting close to failure. If it's a fixed hinge odds are it just needs tightened up or MAYBE the leafs of the barrels in the hinge are misaligned (if the screw goes super tight and the temples are still floppy this is the case). I actually just did a video on setting the right tension for hinges last week, so check out my newest video! :D

[@ripping7721]

Worked perfectly! My glasses were so loose, now fixed, thanks!

[@ThatGlassesGuy03]

Glad to hear this helped you!! 😎 Nobody hates slipping glasses more than the person wearing them 😂

[@thegildedstork8167]

I could not get this to work but I have a simplier fix that I came up with. Use those little dental rubber bands that people with braces use. Double wrap them around the frame arms and slide them all the way down into the hinge. I had to use 2-3 on some of the arms on my glasses. Took me less than 5 minutes and I just went and fixed all my stretched out eyeglasses!!!! Can't even see the rubber bands! Plus I still have the flex I need.

[@ThatGlassesGuy03]

That works in a pinch, little different than most of what I go over in this video, this one is more intended for newer pairs. Aged and stretched is another ball game, check this one out for better help there! kzbin.info/www/bejne/m5OXknx5idOIfrM Love the ingnenuity of your fix though! I’ve used rubber bands or even paper/card stock to fill a void on some odd ball hinges that had broken before to make them more wearable while I was waiting on parts. Great stuff!

[@WynterKA]

Wow thank you so much. I just did it myself in seconds after 4 visits. I’ve been researching for months. Rubbing them worked.

[@ThatGlassesGuy03]

🥂 glad this helped you get the knowledge you needed and a perfect fit! 😎. Some things you can just do better yourself with a little info (shouldn’t be as true in this case, but alas, here we are where adjusting and fitting has become a lost art 😅)

[@bethatlikeness5458]

Just bending by the ear and warming it up with my finger like you said helped right away!! They stopped slipping the moment I looked down at my desk!! Cant wait to get home and dry the blow dryer safely... thank you 😊

[@ThatGlassesGuy03]

Awesome! It makes such a huge difference when we'll fitted! 😁

[@jordandiller923]

This was exactly what i was looking for, thank you!

[@ThatGlassesGuy03]

You’re welcome! 🥂

[@rhonda9213]

I needed this, thank you! It was so simple!!

[@ThatGlassesGuy03]

Yay, you're welcome!!! 😁

[@justdinku9042]

Too tight at temple. Should I adjust bridge? My frame has no spring

[@ThatGlassesGuy03]

no, tightness at the temple should rarely to never be adjusted out at the bridge. Check out this video : kzbin.info/www/bejne/mqCteYJ-qpeWfdk Maybe they aren't leaving indentions yet, but this will show you the proper principles for adjusting that out.

[@DollyDiah]

Literally thank you so much i was trying to do my homework and my glasses kept sliding down, you're actually a life saver ❤

[@ThatGlassesGuy03]

You’re so welcome!!! 😁

[@Hiltonteam76]

Brilliant... Such a simple fix after all the hassle I've been through! Many thanks ☺️

[@WLG_JL91]

What makes glasses get loose and not fit properly on ur face ?

[@ThatGlassesGuy03]

Generally just the materials stretch and relax over time. The quality of the material and the design will determine how often/quickly this is an issue

[@mikerotch6068]

Can I adjust titanium at home or should I go to the optician

[@ThatGlassesGuy03]

That's a pretty big blanket of frame construction, of which most frames called titanium aren't, and those that are, are incredibly difficult to work with. I'm gonna lean safe and say take it to an optician 😉

[@MrsRemi]

This was sooo easy, thank you! I only bent it ever so slightly, not really a *visible* change but you can feel it right away. I think it needs a bit more adjustment but I'll let an optician do it more accurately next time. For now this is the fix I needed, my glasses were sliding around so much that I got headaches from wearing them

[@ThatGlassesGuy03]

Such an underrated fit fix! I glad this helped get rid of that headache!! 😁

[@MrsRemi]

@@ThatGlassesGuy03 I was so scared of breaking them if I did it myself but couldn't get them fixed outside due to being sick at home. You've literally helped to improve my health and not just fix a small annoyance!! THANK YOU

[@ThatGlassesGuy03]

@@MrsRemi🙌❤️ breaking is always possible but most glasses can take a pretty good bit of abuse, they’re meant to be bent and fitted 😁. (Always consider using that “super thanks” button on exceptionally helpful things too 😁, still getting use to this new feature myself 😂)

[@bettyredford8165]

Thank you for your reply, I have never done this before. I live in Boise, Idaho.

[@cathelinemutunga796]

please explain how to tighten the metallic frame again

[@ThatGlassesGuy03]

I'll do a video soon focused more on adjusting metal frames :)

[@sumayahm1164]

Hi The Glasses Guy, how often is too often to be going into store to adjust your glasses? I find that when my plastic frames are adjusted by the store they're good for a few weeks but then loosen up a bit. But I don't want to go to the opticians too often in case they break. Thank you :)

[@ThatGlassesGuy03]

Never too often 😁 lower grade acetate and some nylon blends can get out of adjustment pretty quickly. Until the material begins to feel dried out from the heating and cooling you're totally fine (and this takes many many many years typically). With metal frames this is an amazingly good indicator of a soon coming failure, so good on you for thinking of this!!! 😁

[@joed8016]

What about if they are straight arms

[@butterflipmanny]

Great video! My glasses are brand new and do not sit even when on a flat service and when they’re upside down, so I know the temple arms at the hinges were made slightly crooked, what should I do? I feel like asking for a new pair because I hate the idea of having new glasses bent just because they were made crooked.

[@ThatGlassesGuy03]

All glasses need bent and fitted to your face. When properly adjusted they will never sit flat on a table. Learn more on thst topic here, but glasses are made and designed to be bent, and especially on the lower end arrive in all sorts of misalignment from the distributors. kzbin.info/www/bejne/pJ69pohqlJ6hi9U

[@frankmontez6853]

Yep gotr a heat gun and worked much better fit . One side might be a lil off from the other but it'll do for now

[@ThatGlassesGuy03]

Heat gun is a bit excessive. Well done 😂.

[@frankmontez6853]

@@ThatGlassesGuy03 do the nose support lil tabs have anything to do with it ? I think they do . Mostly the sides but a lil bit with nose support

[@ThatGlassesGuy03]

Only if they’re way off, and generally with acetate they aren’t. If the temples aren’t just right it can feel like one pad is digging in more than the other.

[@joetroutt7425]

I have a pair of plastic Nike frames that when I tried them on they fit fine but when I got them back with my lenses in them they are really loose now. The ear pieces open up too far and they don't hug against my head. The only way I've fixed it (barely) is to bend the end of the ear piece down and around the back of my head. They are still not right but at least they stay on now. I don't want to bend them anymore than I already have for fear of breaking them. Maybe the hair dryer will work idk. It's more about the actual frame itself being too straight across and not curving around my face but don't want to risk bending that part bc it may break.

[@ThatGlassesGuy03]

Those frames follow the lens curve, this one is on whoever manufactured your prescription lenses. See it way too often these days, will definitely be an upcoming video. You can bandaid it a little as you’ve already done, but that’s only gonna get you so far.

[@joetroutt7425]

@@ThatGlassesGuy03 it's all good. Might just get a lanyard to hold them on during times of extreme movement.

[@ThatGlassesGuy03]

That’ll definitely do it. There are also silicone ear hooks you can get really cheap that will work, but they’re a pain to slide on and not super comfortable IMO (but I also hate cable temples). Unfortunately those Nike frames just don’t give a ton of room for an adjustment or I would recommend that. The lens fit takes a big priority on how finished feel and grip works out.

[@nicci24]

Can I warm Rodenstock frames? The arms are plastic with a metal skeleton. They are 'cold glaze' so I'm not sure if heat will damage them

[@ThatGlassesGuy03]

Anything that is marked cold glaze should not be heated. Anything above 100*F will cause irreparable damage

[@Yawntin100]

Thank you so much I broke my glasses and when it was fixed it was so loose to the point I couldn't watch stuff on my phone, never knew it was this ez!!

[@ThatGlassesGuy03]

Just a little basic knowledge to make all the difference in the world 😁

[@nancymcshane3501]

Watched because title included too tight! Had mine adjusted before the weekend and now, on Sunday, I am getting headaches and painful sore place behind ear. Haven’t tried hot water yet, been massaging, but still not right.

[@ThatGlassesGuy03]

Definitely sounds like more tweaking is in order!

[@teslamr7333]

If I had these cheap lens put in and the side are sticking out because the cheap lens is thicker than better lenses, can this be fixed or do I need to just get a better lens that isn’t so thick?

[@ThatGlassesGuy03]

Are you saying the edge of the lens thickness is sticking out or the temples are out wide and the frame doesn’t fit? Unsure from the two comments exactly what’s going on.

[@teslamr7333]

@@ThatGlassesGuy03 near the hinge/ endpieces is where the frames are sticking outward.

[@ThatGlassesGuy03]

Gotchya. Yes see my Other reply then.

[@kellywilliams9194]

Finally somone told me something I didn't know & how to tighten my frames. I have watched the dumbest videos on how to tighten frames🙄.

[@ThatGlassesGuy03]

I've seen a few myself 🤣. Glad you found this one helpful! 🙂

[@imeldameta8954]

Omg it worked. Mine aren't like your glasses, they are only a half skeleton and only the end is a little bit plastic. Since I got them they were a little big for me and now I did it just a little bit and it worked. Thank you

[@ThatGlassesGuy03]

I'm so happy this helped you!!! Thanks for watching, and you're very welcome! 😁

[@LostStylus]

Is there a way to fix this for Oakley Deadbolt? They don’t come around ears by design :/

[@ThatGlassesGuy03]

First of all, cool frame!! Second, yes but it's very different... ill try to do a video soon, ut these should be adjusted so it follows the curvature of the skull instead of down behind the ears :) basically it should huge the shape of the head for its grip vs relying on the ears to prevent forward motion, it's a fine line as too much inwards arc will have the opposite affect and cause it to actually push itself off more 🙂

[@LostStylus]

@@ThatGlassesGuy03 thanks! That’s what I tried to do and it seems that I’ve bend it more than needed, seems like it might be the problem, the frame seems “slippery” on my head all the time. Will try to fix the shape :)

[@LostStylus]

@@ThatGlassesGuy03 I ended up bending the arms downwards and changing nosepads.

[@ArtemioGonzalezPerez]

Thank you so much. I went to the glasses store three times to tie them up and they still were loose slippery I’ll see you a video now ther tide. Thank you.

[@ThatGlassesGuy03]

Hate the glasses shop couldn’t get you taken care of, but love that you were able to come here and fix it yourself!!! 🥂

[@zhaoyangxie]

Do I have to bend the arms straight before bending it in another place?

[@ThatGlassesGuy03]

That will depend on the frame and how it's factory bend is placed to some degree, but typically, yes that is the better course of action :)

[@kantnoc2010]

Good stuff worked KZbin univers wins again!

[@ThatGlassesGuy03]

🙌 so cool how much helpful stuff is out there isn't it?!

[@WLG_JL91]

How to repair my glasses whenever they get loose

[@ThatGlassesGuy03]

Like slipping off or loose screws? Have videos for both just let me know and I’ll link you to the correct one :)

[@redgobofraggle]

So my glasses are adjusted and feel great around my ears etc. Over time or when sweating they seem to lift from the ears - one ear more than the other. Can the bend following the skull curvature be to tight and maybe this pushes them up? They are acetate frames. Also, most opticians tell me that the ear bend should be 45 degrees, but I'd say for the least sliding I need around 65 to 70 degree bend which is comfortable as I have a high prescription of -9.0 would you say this is normal? They are ultra thin but I always seem to have to adjust myself after leaving the optician as they refuse to bend more than 45 degrees.

[@ThatGlassesGuy03]

A frame balance that's front heavy can require a deeper bend down or in behind the ears, but as you've noticed too far can lift and make the balance issue worse. It's a tough balance to get right no doubt, but I don't agree that 45 is always correct..correct... just that the 90* bend is ALMOST never correct 🤣

[@starrystarrynight9822]

Thanks dude--I had no idea I could make those adjustments on my own. Yay 😊

[@ThatGlassesGuy03]

It so great to be able to! 🙌

[@sandhyajamarkattel302]

Omggggggg I'm so thankful to you 😭😭😭 You saved my lifeeeee ❤️

[@ajarnthomas]

I tried the heat method to bend out the temple tips on my TR60 glasses because they pinch behind my ears, but they didn't budge a mm. Is there some trick to adjusting TR60 frames?

[@ThatGlassesGuy03]

Heat won't do it. A proper made frame of that material will have a different adjustable material for the tips that's really easy to work with. Sounds like your entire frame is the TR material, and in general isn't adjustable.

[@kiefermatthew3055]

Thanks just fixedime.too!😊

[@ThatGlassesGuy03]

Nice work! 😎

[@lylamarker4298]

Super tried the hair dryer and it worked thank you 👌🏻

[@ThatGlassesGuy03]

💥 🥂😁 glad this helped you out!!

[@sherrimosley8590]

Thank you I took my new glasses back and they didn't do what you did I followed your instructions and they fit much much better

[@ThatGlassesGuy03]

That happens way more often than I wish it did 😔. But sometimes, you can tell what's needed so much better with just a little information and help 😁. Glad this got you squared away!!!

[@elizabethsfreemovies4447]

Brilliant thank you!!! Fixed my plastic ones straight away after awhile of them slipping of!!

[@ThatGlassesGuy03]

Yes!!! You’re welcome! 🥂

[@ESerafini91]

You just saved me a trip to the store, and saved my weekend!

[@ThatGlassesGuy03]

That's what it's all about! Glad this helped you!!!

[@Brunno34]

Are those the hemmings Jacque Marie Mage?

[@ThatGlassesGuy03]

Nope, etnia Barcelona st. Regents. A terrible design too honestly. Poor balance and VERY difficult to get fitted and not slipping >.< sure looked good though! 👍

[@Brunno34]

@@ThatGlassesGuy03 you’re talking about the ones at :48? Those looked just like JMM on the side but I guess not. Good video though

[@ThatGlassesGuy03]

Yes, I am. 🙂 thanks!

[@dipper5835]

The arm fits the side of head but the glasses still slide down my nose, what is the reason for it still sliding

[@ThatGlassesGuy03]

Most likely the bend is made too soon, or arms too tight. The former causes lift throwing the balance off pushing the frame forward. The latter creates effectively a giant spring that resolves itself by pushing off of your face. It's all a delicate balance :) a bad fit overall that doesn't properly sit on the face is a third alternative of course, with no real resolution.

[@evakhalidkhalid5395]

Thank you so much it actually worked 😻

[@ThatGlassesGuy03]

I try ;) Glad this got you sorted out!

[@Natalies_YouTube]

Great, thanks! I was going to buy another pair of glasses. So happy I checked KZbin for a solution. 😊

[@ThatGlassesGuy03]

Haha, always best to fix what you have via throwing away a perfectly usable set!! (Of course I always encourage a new pair for fun 😂)

[@Undeadpuppyprince]

Duuuude you're a lifesaverrrrr!

[@ThatGlassesGuy03]

🥂 😂 keeping glasses “afloat” since 2008 ☠️. Now I feel old. Excuse me for a bit.

[@stevejonathan_14]

Thanks man!! Worked!!

[@ThatGlassesGuy03]

Like magic! 🥂 glad this helped you!

[@jademckay-robinson8447]

Very helpful. Thank you ✨

[@ThatGlassesGuy03]

You’re very welcome! 🥂

[@matthouston8411]

Those scott harris 566 are sweet frames.

[@uzear_sheikh]

i have steel elegante blue cut glass what i do

[@ThatGlassesGuy03]

Beautiful frames. At any rate, something like that I would be more inclined to say find an optician locally. That material is pretty darn stubborn and hard to adjust without proper tools and know how 🙂 if not.. the temple shape doesn't look to allow for bending downwards behind the ears much, and would really on changing the inward arc to grab more by going inwards more

[@peterjoshuva1521]

Hello brother I would appreciate if you could share the brand and model number of the glasses that you used from correction Take care bro

[@ThatGlassesGuy03]

Hi Peter, most of these aren't available online but I'm happy to help if you're looking to get into a pair, all 3 are right around $300 retail frames :)

[@peterjoshuva1521]

@@ThatGlassesGuy03 bro but I live in Dubai

[@ThatGlassesGuy03]

@@peterjoshuva1521 that's what shipping is for 🤣. It's nuts I can deliver to Isreal as fast as NY 🤣

[@itsdalora3006]

@@ThatGlassesGuy03 said uklooooiuh. Jhansi Ik lkky my u 🙋‍♀️ of a Chesnut year oomph

[@DogKahlua]

What about too tight??

[@ThatGlassesGuy03]

Watch it again? The concepts are the same. It’s all about getting the bends behind the ear placed correctly :)

[@nyag1764]

Handsome fella. Thanks for the tip!

[@ThatGlassesGuy03]

Thanks Nya! You're welcome! 😁

[@MattMaryHarper]

Ugh. That won’t help me as I wear cochlear implant processors. 🙁

[@ThatGlassesGuy03]

It can still be done, just follow the tips for the skull curve instead of bending down behind the ear :). If you’re not sure just have a professional optician fit the glasses for you 😎👌🏻

[@ericskimchiddong]

thank you man i was stressing out over my new glasses i bought that kept sliding down my nose

[@ThatGlassesGuy03]

🙌❤️‍🔥

[@AyeshaZaheer-kn9ge]

it's work i am so happy. I try so many things but thats not work but this thank you so much

[@ThatGlassesGuy03]

😎🙏🏻 glad this helped you!!

[@manuelagerlach8673]

Thank you.

[@ThatGlassesGuy03]

🥂

[@xeniapool5766]

Omg you saved me I’ve had such a hassle with my glasses sliding off 😌

[@ThatGlassesGuy03]

🙌 yay! Glad this helped you+ 😁

[@jenniferjohnson5923]

Wowy! It worked!! Thank you!!

[@ThatGlassesGuy03]

You’re very welcome! Thanks for watching. Very happy this helped you!!

[@Blue_Lugia]

I don't think I want to try anything.😟 I rather go visit the place where I bought my glasses. One of the lenses is about to pop out!😬 But I have to wait untill monday so I need to be very careful with them....😔 I noticed that one lens was "lose" because it made a sound when I walked... My vision is horribly bad so without my glasses I would have trouble navigating when being outside.

[@ThatGlassesGuy03]

Usually best to leave it to the pros, I originally started this series as more informational vs a how to.

[@reparaciondespejuelos]

Thanks for the tips!

[@ThatGlassesGuy03]

You’re welcome! 🥂

[@allenmargaretnamutebi6029]

Thank you, 😊❤ that was helpful

[@ThatGlassesGuy03]

You’re welcome! 🥂 😎

[@ChrisFDOT94]

How do you go about shifting the glasses from right to left? I feel like my glasses are on the left side of my nose and not centered lol.

[@ThatGlassesGuy03]

Metal frame with nose pads? Would shift both pads in the opposite direction that you want the frame to go. More often it's a case of one side being too close, especially if it's a plastic frame. In that case most often it's one temple stretched out too far, and that side will be sitting too close. Bringing the stretched side back in resolves this :)

[@ChrisFDOT94]

@@ThatGlassesGuy03 Yo thank you so much for the quick reply! It is a metal frame with nose pads. Thanks again!

[@ricakaren8004]

Wow! What a great help! ❤️ Thank you. 😊

[@ThatGlassesGuy03]

🙌😎

[@RhonyHart]

Thank you so much I literally stop wearing my glasses all day because they kept falling off I didn’t know you had to do is use my heat for my hand and bend them

[@ThatGlassesGuy03]

Awesome!! 🙌 you're welcome!

[@101dude6]

Omg thank you!!! Thank you!!

[@ThatGlassesGuy03]

🥂 glad we could “stop the slip” together 😎

[@youssifmohammed1513]

Thank you so much man I thought my glasses were broken or something but you helped me so much

[@ThatGlassesGuy03]

🙌 happy to help 😁😁

[@Dae_Q]

Well done brother

[@josephnguyen4548]

What state are you from? I like your accent!

[@ThatGlassesGuy03]

TN 😁

[@dynamic_spirit_17]

@@ThatGlassesGuy03 My state is Tamil Nadu (TN) in India 😅shocked by your reply suddenly 😂😂😂

[@ThatGlassesGuy03]

@@dynamic_spirit_17 😂😂 what a cool coincidence! Tennessee, United States for the international crowd 🙂

[@dynamic_spirit_17]

@@ThatGlassesGuy03 😅😅now only I've searched your state's name in google man.Hilarious coincidence 😂❤

[@thinkbeforeyouact8242]

Thank you very much

[@ThatGlassesGuy03]

You’re so welcome!!

[@samanthadenise578]

Thank you so much for this! Super helpful!!

[@ThatGlassesGuy03]

You're very welcome, thanks for watching and I'm glad you found it to be helpfup+!! 😁

[@jackietillery1716]

Right on thanks so much better !!!

[@ThatGlassesGuy03]

🙌❤

[@mimiwashe6576]

It worked thank you so much

[@plumpest.princess]

you saved my life, dunno how I never thought to just bed slightly behind the ear

[@ThatGlassesGuy03]

🙌 A little change here and there makes a huge difference 😁

[@nidafatima4569]

thnxx bro😊

[@michaelcomer1645]

This was very helpful

[@ThatGlassesGuy03]

Glad it helped, and thanks for your feedback! 🙌

[@ARAKAWA00]

You helped me a lot sir, thank you so much!

[@ThatGlassesGuy03]

Happy this helped you!! 😎

[@heath4984]

Thank you for this video! I literally laughed at myself after I did it because I’ve been messing with my glasses all damn day lol.

[@ThatGlassesGuy03]

If we don’t laugh at ourselves someone else will 🤪. Glad this helped you!! 😎

[@jillpannill2578]

Thanks! Fixed in about 2 seconds! 😅

[@ThatGlassesGuy03]

Sometimes it’s just a quickie and perfection! 🥂 😂

[@Thevinduken]

Thank you so much for this tip.

[@ThatGlassesGuy03]

You're welcome 😊 🙌

[@SB-mn4dy]

Omg you are a life saver 🙌🏻

[@ThatGlassesGuy03]

That’s what I’m here for! 😎

[@jaimerivera2545]

Got mine fixed, Thanks a lot!!

[@ThatGlassesGuy03]

Awesome!! You're so welcome!!!

[@hellomiraflor]

It worked! Thanks!

[@ThatGlassesGuy03]

Glad it helped!! 😁 thanks for watching!

[@AjTheDarkestNarrator]

Honestly it feels perfect around my ears i just feel like the arms of the glasses are really wide. It’s so annoying when I wear a mask in school and my glasses just get tossed on the floor. It’s really irritating, people bully me about it.

[@ThatGlassesGuy03]

The other common problem is a plastic frame stretching out wide. Still a pretty easy fix but usually better done by an optician because the areas that need heated are close to the lens and easy to cause damage.

[@honestlygio7830]

Try showing a closeup of the actual backside of the ear thx.

[@ThatGlassesGuy03]

Will try to post that as a "Shorts" soon :)

[@daisykipgen7686]

Omg,it worked,thank you so much

[@ThatGlassesGuy03]

🙌 Glad this helped you!

[@giawillis4992]

Simple fix! Thank you!

[@ThatGlassesGuy03]

🙌💙

[@teys6847]

Thanks a lot

[@ThatGlassesGuy03]

You’re welcome! Please consider using that super thanks if this has helped you 🙌❤️

[@Space-Fonzo-7]

No way. I've been living angrily about my glasses for years and it was that easy lol

[@ThatGlassesGuy03]

It really is. 😂☠️

[@justred5164]

OMG! I just adjusted my glasses using your method! What a difference! Thank you 🙏🏽

[@ThatGlassesGuy03]

Happy to help! 🙌😁😁

[@guestplayzroblox1188]

Don't use the LORD's name in vain.

[@justred5164]

@@guestplayzroblox1188 what? Who did that?

[@RW_07]

@@guestplayzroblox1188Could be Oh My Gosh, instead of God!

[@johngoard8272]

The rounder specs suited you better mate!

[@ThatGlassesGuy03]

It’s a look, just not one I’m particularly fond of.

[@ahmedagaga5835]

I am an Egyptian optical technician. I can maintain all glasses and of course install them. I can even use a vision detector. I want to travel for work. Is there anyone who can help me?

[@ThatGlassesGuy03]

Build out a website and start advertising! Not sure what your local laws are in terms of licenses and certifications required but here in the states we have many “mobile” opticians offering work for hire

[@ahmedagaga5835]

@@ThatGlassesGuy03

[@willtell6263]

Fudge! So simple!

[@snoopdog3423]

I literally had a broken rubber band tied to each end of my glasses across the back of my head holding my glasses on at work today cause I couldn’t look down without them falling off, so simple fix I really feel like a dummy.

[@ThatGlassesGuy03]

I've seen the ole rubber band hack so many times, and yknow what, who cares! It worked while you needed it to, but now you're squared away properly 😁🙌

[@danpaxton3535]

Paid $400 at lenscrafters, the frames were so tight they were giving me headaches. Then I went back to get them loosened, and they loosened them so much they keep sliding down my nose every two seconds. I wish they just measured it right the first time.

[@ThatGlassesGuy03]

ooph! Some frame/head combinations require finesse, and of course not all adjusters are created equal sadly. Hopefully you can find somehwere with better luck!

[@rositadeolivio4397]

I just used a lighter ..did the job thank u 😂👍🏼

[@ThatGlassesGuy03]

You're far braver than I 😂

[@judyyougotthis]

Thank you!

[@ThatGlassesGuy03]

You're welcome. Thanks for watching! 😁