How to fix no display on Jog Wheel on CDJ 2000NXS2 Pioneer

Рет қаралды 4,217

Күн бұрын

Пікірлер: 27

@DJGrooveHouse Жыл бұрын

nice work, but I think the jog adjust not working properly. you had it set to light and the jog barely turned and seemed to grind

@ARTaudio440 Жыл бұрын

Hi, thank you for watching ☺️ Yes you're correct the jog adjustment doesn't work properly. I had no chance to check it.

@jpsgamboa 3 ай бұрын

Are you based in the Philippines? Which area?

@ARTaudio440 3 ай бұрын

@@jpsgamboa Hi, outside Philippines. Thanks for watching ☺️

@nikrico5320 Жыл бұрын

Hi, so i had a drink damaged 2000nxs2 given to me today for a clean-up. I tested it first and there didn't seem to be any issues, but the exterior was very sticky, so I cleaned all the outside and opened it to check its internals. There was a fair few spots of liquid on the centre clear plastic sheet, on all sides, so it needed removing and cleaning. After doing this and testing, I am now getting no main screen, everything works apart from the screen. Any advice on where to start diagnosing the dead screen issue? Thanks.

@ARTaudio440 Жыл бұрын

Hello, thank you for watching ☺️ My advice is to focus only on the display lines. Trace the line of the display and double check the flat cables. I suggest also to check the lcd itself.

@nikrico5320 Жыл бұрын

@@ARTaudio440 Hi, Thanks for the reply! I have checked all the ribbon cables, and they are all clean and undamaged. Any idea on how to check the LCD?

@ARTaudio440 Жыл бұрын

I haven't see it before the structure of the LCD for this model. Double check the volts supply If you can see some levels or markings on the LCD lines.

@ARTaudio440 Жыл бұрын

@@nikrico5320 Please check also the backlight suppy of the LCD

@adrianfernandez8750 8 ай бұрын

I have a problem with my cdjs 2000 nexus 2, the jog wheel does not move and the Slip rev and Rev does not work, any solution?

@ARTaudio440 8 ай бұрын

Hi, thanks for watching!☺️

@WazzyTV 11 ай бұрын

how do you fix jog vinyl light..theres a button u press for jog either cdj or vinyl..when I press it cdj light comes on but vinyl light doesn't..how do I fix it

@ARTaudio440 11 ай бұрын

Hi, thank you for watching ☺️ Please check if the volt supplies are ok, this can be seen on the PCB board.

@WazzyTV 11 ай бұрын

@@ARTaudio440 my platters on my CDJs are squeeky and wobble and the bearings are noisy..is that a problem I should get fixed or is normal?thanks

@ARTaudio440 11 ай бұрын

Hi, it's not normal. I would suggest to bring it to an authorized service center.

@WazzyTV 11 ай бұрын

@@ARTaudio440 I will do that thank you

@trungkien5549 10 ай бұрын

My Pioneer CDJ-2000 Nexus 2 has firmware update error ''E-7023: GUI CPU ERROR''. I can't update the firmware again because the screen keeps showing this error, The error screen is orange with the text ''E-7023: GUI CPU ERROR''. Please help me.

@ARTaudio440 10 ай бұрын

Hi, I had just read this and sharing to you if it works. Download the latest software. Press and hold USB and Exit/Loop while turning on the power . If it's still the same, the cable inside must be checked and do the cleaning with the use of the eraser because sometimes it gets oxidation and loses contact.