PRINTER REPAIR: How To Diagnose And Repair Stop Jams

[@douglaswiseman2630]

Another thing I ran into is bad media. I do a finger rub test on the paper media. If you can see white dust on your finger tips.. it could be bad media. Mostly for cheap label paper for Lexmark printers..

[@emmawatson3788]

Great trouble shooting help. Thanks

[@EurekaRecycler]

could you put a link to your other jam videos? Thank you

[@rafaeljaramillo4934]

regards I am from Ecuador, could you help me I have a 4515 hp printer with tray 3 and it only stays when I print on tray 2 in the other trays they print well and I change the selonoid and I can not find the error that may be the damage also change all rollers and fuser I have changed everything changeable Thanks in advance

[@xx3868]

Hi, i get a squeak squeak sound only when i push the print button data sent from computer. Sounds seems to be reg pulse speed of say the paper travel. Checked the motors and gears on said of machine and turned toner carasel by hand and cant get any squeak. So is it in the I/C, the inside rollers or transfer belt for the image? or the fuser gears and those rollers. I might have to get in to the unit and try to find noise. i avoid the I/c as i want to avoid drum exposure being the organic type- i keep that under a blanket to keep light out.

[@byronelejidoguino3733]

Nice! Thank you👏👏😊

[@weaesq]

Great trouble shooting help. I was wondering If the fuser rollers wear out, do you have a stop jam as well. Thank you for this video.

[@VLearnIT]

Yes you can have jams from the rollers wearing out.

[@catherinenovinger1176]

I had a paper jam and pulled it forward on an HP deskjet 5150 is it ruined or can it be fixed?

[@juancarbonell1754]

Great video. Thank you very much.

[@johnguerassio9]

I have a large plastic belt that feeds the paper through. Can I get get a replacement?

[@victorjames6242]

I have a Hp LaserJet enterprise MFP M632 printer that keeps jamming at the fuser unit. i got a fuser replacement immediately but the problem persisted. i went further to to run an onboard diagnoses, came across a ''paper path sensor" but the printer said its unreachable. could this be the problem to why the media keeps jamming at the fuser ?

[@katherineedgaran5235]

How can i repair if the papaer is not getting in the printer and the computer said that there is a distraction

[@katherineedgaran5235]

Pls help me