How To Fix The Emergency Brake Light on a 2006 Ford F150

If you're looking for a quick and easy way to diagnose your emergency brake light staying on of flickering, then you've come to the correct video! If you're looking for a technical breakdown of why this works, you're in the wrong place! Lol.
If you have any questions please let me know, thank you all for watching! At this point we are at almost 900 subscribers! I will be doing a giveaway as my way of saying thank you when we hit 1,000 subscribers :)
#ford #f150 #emergency #brake #light #fix
-- USE MY LINK TO SHOP AT LASFIT!
www.lasfit.com?afmc=2a
**FIND ME ON INSTAGRAM -- @andrew_doeslife
**FULL LIST OF TRUCK MODS I'VE DONE AND PRODUCTS I USE
RAPTOR GRILLE -- amzn.to/2IZHp4V
HEADLIGHTS -- amzn.to/2J6YFUE
TAILLIGHTS -- amzn.to/2RE3Pv3
K&N COLD AIR INTAKE --- amzn.to/2N2saMw
SPARK PLUGS --- amzn.to/2XkdAEf
BULL BAR --- amzn.to/2ZDUer7
FENDER FLARES --- amzn.to/2XWVN32
NERF BARS --- amzn.to/2Y0yBRt
BLACK GRILL --- amzn.to/2XVFZxn
RAPTOR LINER --- amzn.to/2FmRO8r
TONNEAU BED COVER --- amzn.to/2XWVXra
LEVELING KIT --- amzn.to/2Y46nFm
K&N HIGH FLOW AIR FILTER --- amzn.to/2MZO5nx
DOOR HANDLE COVERS --- amzn.to/2N2sP0s
TAILGATE HANDLE COVER --- amzn.to/31KXMtu
REVIEW MIRROR COVERS --- amzn.to/2N1lgr3
PLASTI DIP --- amzn.to/2XpuHEv
3M ERASER WHEEL --- amzn.to/2IPgRlq
SOCKET SET I USE -- amzn.to/2FIZGRQ
***F150 Build Playlist. -- • DIY TRUCK MODIFICATIONS
***F150 Plasti Dip Transformation Playlist -- • F150 PLASTI DIP TRANSF...

[@AndrewDoesLife]

2004-2008 F150 Mods! - amzn.to/3uvY2j9 2009-2014 F150 Parts! - amzn.to/42A6KJZ 2015-2020 F150 Accessories! - amzn.to/3uv75Ry

[@raygordon3728]

@ 3:00 I paused video and went outside to my 2006 F150. Had everything off in 2 minutes. It appears that the harness in back hits the plastic dash area. It could be attrition over time with heat and warping. I pushed on the harness and the light went off. I put the top piece back on and the light went back on. You have to push a little hard to keep a little distance between the harness and dash. Light is now off and working accordingly. Thank you!!

[@bingnowtv]

I have an '06 exact same problem. Asked God to handle this and a little time and your video pops up. Good ideas & good people is what its all about TY

[@AndrewDoesLife]

Sometimes God just knows exactly what we need! Haha always happy to help

[@josephrobinson7933]

Andrew, you’re a life saver dude. Your fix worked for me. I just purchased a used 2007 F-150 and the red brake light wouldn’t shut off. And I even failed my NH vehicle inspection. Well I went home and it worked. You saved me $250.00

[@AndrewDoesLife]

Always happy to help Joseph!

[@ezmeuc3093]

After years of stressing about this light for inspection I finally got rid of it! Thank you so much for the video! Keep up the great work! Thank you!

[@coltonabernathy2576]

Awesome my friend! I didn't pass my inspection earlier today and with your video, this was a simple 5 minute fix and I have the inspection complete now. Thank you so much!

[@the.fightculture]

Ahh it’s been three years and finally turned that light off, thank you!

[@AndrewDoesLife]

You’re welcome Marissa!

[@stevee.6725]

Did it ding incessantly too?

[@victorsmith2638]

Wow. What an EXCELLENT and quick video as a fix. I googled my brake light problem and found so many other complicated solutions. THIS ONE WORKED on my 2007 F150 STX. I've not put it back together as of yet (won't take long but just had to come inside the house to post this !) but ,after I took the plastic panels of, as soon as I moved the connection on the left side of the dash, the brake light went out ! It's been on for 3 years. Others have said they'd stuffed in some kind of material. For me, I notice when I push the connector forward towards the windshield, the light goes out so I'll stuff something in between the connector to keep it more secure. Best video I've seen in a long time. THANKS !!

[@AndrewDoesLife]

Thanks Victor! I made this video as I was very frustrated by the lack of quality instructions on how to fix this common issues with our trucks. Hopefully it can help other people as well!

[@amystrader9482]

Well done Andrew! This is the kind of video I can really appreciate. Been having issues with getting my truck inspected every year because of this. Now that I know how to temporarily bypass the situation, I can get it inspected on time instead of praying the light will go off for one day, ha! Thanks so much

[@AndrewDoesLife]

Thank you very much! Glad it was helpful

[@garyfast9072]

Andrew, my wife and I used your method on our 2007 Ford F-150. It worked like a charm! Thank you!

[@AndrewDoesLife]

I'm so glad to hear it helped you out :) thanks for the support!

[@DavidJohnson-ic9ti]

Thank you so much. I’ve seen videos about repairing shorts in the harness and adjusting the switch on the brake pedal. This is the only thing that actually worked.

[@BuildingADrink]

Wow, I have no clue how much time you saved me trying to figure this out. This was my issue. I had to remove the cover a few times before I got it to go back together without the light turning back on, but it's off. Thank you I appreciate the advice.

[@brothamarlon6456]

Thank you so much. I just got my first truck after 35 years and it’s the exact same truck. I had the same exact issue on my truck but not no more thanks to u!!! Thanks a lot!

[@robertrivers380]

Broooooo you’re the GOAT.. this has been a headache for myself and my mechanic

[@AndrewDoesLife]

Happy to help!

[@motehopper]

@@AndrewDoesLifeSo what happens when you tighten the dash back together? does the light come back on? thanks.

[@frankromeo6538]

Thank you, I'm due for an inspection and couldn't figure out why the light wouldn't go off. This was a simple fix that I am very happy I found. Thanks again. Frank

[@AndrewDoesLife]

Happy to help, Frank!

[@mybmerz4]

Thanks so much! I have the light on for few years and you just save me a lot of money!!! Great video.

[@AndrewDoesLife]

Happy to help!

[@robertgonzalez1339]

Great video and great tip. I came across your video after replacing brake light switch and brake fluid sensor. Your trick took care of my problem. Thank you my friend.

[@AndrewDoesLife]

Glad it helped Robert!

[@paulepling]

I'm so excited I saw this. I'm doing this tomorrow! I replaced my brake switch interruptor immediately but it didn't fix it, so I'm definitely trying this!

[@AndrewDoesLife]

Hopefully it fixes your issue Paul!

[@christopherszatny9926]

This worked for my 2005 F150 EXT...thank you. It drove me crazy. Changed E-brake switch & brake fluid level switch with no change...I was skeptical but tried figuring what have I got to lose? Well, it worked. Update: 2 days later the light came back on so I removed the cluster, took it apart(marked the position of the guages before removing them)and soldered the resister(182?). Been over a month and it's been fine.

[@AndrewDoesLife]

Great to hear!

[@christopherszatny9926]

This worked, however, it was only temporary. I removed the cluster and made a permanent repair...soldering the 821 resistor as described in another KZbin video

[@AndrewDoesLife]

I do not have the soldering skills or else I would’ve made another video showing how to permanently solve this issue haha you should make one though to help other people!

[@anothersomebody8195]

@@christopherszatny9926 did you resolder a resistor, replace a resistor or add a resistor?

[@chrisfavre6216]

Thank you so much. After a year of an annoying light I made the fix! I used a piece of foam pipe insulation and wedged the harness still. That took care of it.

[@AndrewDoesLife]

Happy to help Chris!

[@oddpancakegaming4391]

I have a f150 2008 and this video fixed the issue, thank you!

[@vincestermer3105]

Thanks alot man, i been battling this issue in my 2006 f150 too for about a year now. Gonna check it out

[@tempglass]

I was skeptical at first but thought, what the heck.....This worked great on my 2007 f150! When I pushed the circuit board and connection just a fraction of an inch toward the front of the truck the light went off. When I let it go it came back on. So I wedged a small piece of folded cardboard between the frame and connector to keep it pushed slightly forward, closed it up and my brake light is functioning properly! Thanks for the easy tip and thanks to the guy on the f150 forum!!👍👍

[@Papirrin-di8cy]

Was a temporary solution or is fixed completely?

[@javierflores8874]

i just bought a 2007 and i thought i was going to spend lots of dollars taking to the mechanic, but i will try this to see if the light will go off, Thanx man ! you probably save me some money!!

[@AndrewDoesLife]

Good luck Javier! Hopefully this works for you

[@JojMarkoMarko]

Dude, thank you. This was insane. Without this video, I would hunt this forever. I added plastic spacer to push the cluster connector forward, away from motherboard. The connector seems to create the problem. Thanks thanks thanks, you are my hero

[@AndrewDoesLife]

Glad it helped! :)

[@freddysoto7651]

Totally worked on my truck. Thank you!!!

[@naseembaluch4244]

Thanks to your video I had the same problem with my Ford F150 2007. Thank you again.

[@GoForMrBig]

This still works and it’s a quick fix! Thank you!

[@AndrewDoesLife]

Heck yeah Chad!! Glad it could help you out!

[@duaneneedham3889]

Thank you for making this video it really helps, I was going have the (E brake) switch replaced and then I saw your video.. the problem fix no more light on my dashboard, Cheers mate.

[@AndrewDoesLife]

No problem! Hopefully the light stays off haha

[@dennisortizhernandez4235]

Thanks man this was very helpful, now I can get my truck inspection and registration renewed.

[@AndrewDoesLife]

Glad it helped

[@josephroni]

Thank you for this helpful video. This resolved my problem. I replaced the switch first, but did not solve it until I saw this instruction.

[@AndrewDoesLife]

Happy to help! 🙏🏻

[@jaynorriss2422]

I’m amazed. You were right and saved me a ton of time. Thank you

[@AndrewDoesLife]

Happy to help jay!

[@user-ei6pi9qi6m]

Thank you so much!!! This was making me nuts. Resolved my issue in literally two minutes.

[@AndrewDoesLife]

Happy to help! 😊👍🏻

[@oggarage3459]

Am gonna try this on my 2006 f 150, that light has been on for the last 3 years, am almost use to it. Thanks for the video.

[@AndrewDoesLife]

Good luck!

[@josephrobinson7933]

Andrew, keep up the great work!!!!

[@AndrewDoesLife]

Thanks! Will do!

[@talibalijunejo9410]

After watching ur video i just slapped that part and its gone . Thanks man great short to the point video .

[@AndrewDoesLife]

Haha that's awesome! Glad it worked out for ya

[@raulm5536]

Thank you for the video, it helped me fix the brake light on my 07 f150 👍

[@AndrewDoesLife]

You’re welcome Raul! Happy to help

[@joenikolaj3264]

just tried it and it works awesome

[@AndrewDoesLife]

Heck yeah! 🙏🏻

[@joea104]

Thanks man I have the same problem and needed it fixed before my inspection. It's so dumb its mainly the wires just wiggle and its as simple as this. Thanks again

[@AndrewDoesLife]

Joe A no problem joe! Happy to help

[@halschichtel3627]

Perfect Andrew, thanks! I used a piece of cardboard to keep the capacitor pushed forward.

[@endrant6073]

After watching, I just knocked on the top of that cluster (without taking it off) & it went off! Thanks for sharing

[@AndrewDoesLife]

Glad it helped! I would do that from time to time but I was afraid of cracking my plastic dashboard haha

[@olysoasis6045]

Mines been on for so long I’ll have to give this a try thanks!

[@AndrewDoesLife]

Hope it works out for ya!

[@Dillon41689]

Thank you!!!!!!! This was a huge help! I know it is not a permanent solution, but let's see how long that will stay off for

[@AndrewDoesLife]

No problem Ryan! Happy to help

[@youngbutwisecrewandcarmeet7576]

Very helpful I just tapped the area without taking down dashboard and worked

[@AndrewDoesLife]

That's best case scenario haha! Good stuff

[@alexandrealbergaria6224]

2022 and you helped me!! Thank you!!

[@jaimeolvera7929]

Tried it took me 30 seconds 😂 it worked thanks bro🤙🏽

[@AndrewDoesLife]

Gosh to hear it!

[@roycrawford8225]

I have the same problem with my 2006 ford f-150. thanks for sharing this video.

[@AndrewDoesLife]

No problem Roy!

[@nomdeguerre13]

Thanks man, worked like a charm!

[@AndrewDoesLife]

Happy to help Aoki! 🙏🏻

[@keithwomack8175]

Thanks was finally able to get that light out.

[@AndrewDoesLife]

You’re welcome! Such a simple fix but also such a weird one !

[@turbob7437]

Finally a fix lol been driving for 4 years with the annoying light on 😂

[@dannypiercesr]

Thanks for sharing

[@absalonmontes9337]

Wow lol But your absolutely right. Idk why but the wiring inside and under the dash definitely have some issues that have some funny but strange remedies like you just showed. I have a 2007 f150 and my driver side turn light blinker on the tail light went out and I spent a little over a hundred in buying new parts like the bulb socket, fuse, relay, multi meter and still nothing worked. I tried dozen of things and still nothing. I followed the tail light relay line from the back to the front and I still didn't find the problem. So one day I was just randomly just cleaning my truck and I noticed that this one wire that usually hangs about 2-3 inches down from under the dash was falling out again and I grabbed it and stuck it back up to where it will stay and it did. And later on that day as I was driving I noticed my blinker was working again. And I was just in total disbelief and kind of concluded that it was just the wiring and so flawed Now seeing this video really solidified my theory Thanks

[@blackseabrew]

Thanks so much brother. Just replaced the switch and the light still comes on intermittently even though I know the switch is pushed all the way in. My guess is that connector contacts are very tiny and the slightest irregularity causes the light to come one. Great piece of information to share.

[@AndrewDoesLife]

Yeah the solder job on these things from factory always fails after some time unfortunately. Luckily there are some easy(ish) fixes for it! Happy to help brother man

[@jimdomi6206]

Just clicked the thumbs up to make it an even 300 :) have an 07 the brake light just started to go on and off while driving,,be on for a while then goes off,,then later down the road back on again etc

[@AndrewDoesLife]

Thanks for making it an even 300 Jim! I appreciate ya

[@TylerAdams0]

Thanks a bunch! This fixed my issue 👌

[@AndrewDoesLife]

You’re welcome Tyler! 👍🏻

[@larrykarr1968]

Hey I did this it worked perfict easy fix ten minutes done mine had been off for two years which was no real problem as long as you make sure brake not on before you leave . I rarely ever set mine so there was no problem I was just about to put electrical tape on it !

[@AndrewDoesLife]

Glad to hear it Larry!

[@jamesteel4819]

Update, I finally did what you said to fix the light, I ended up using zip ties to hold the plug back towards the windshield and it stayed off, thanks for the fix..

[@AndrewDoesLife]

Glad I could help Jim!

[@alexandercallejas3181]

Thanks bro very helpful

[@AndrewDoesLife]

Glad it helped Alexander!

[@javiercarrillo5015]

I will check that !..muchas gracias amigo!

[@charlessmith833]

The problem is because the connector on the board has poor factory soldering on its pins. You should suck the solder off the pins with a solder sucker, preferably a HAKKO vacuum de-soldering tool then re-solder the pins using some good flux. It is a very common problem. If you can't do the job yourself then take the whole instrument cluster to one of your electronics gurus. There are plenty of videos on how to do the job. I've fixed two of them already. Same problem.

[@frankperez7885]

It works thankfully for your video 🎉😅😁

[@AndrewDoesLife]

Happy to help! 😊👍🏻🙏🏻

[@timhughes5939]

Thanks so much. I’m going to try it out. Almost bought a new cluster gauge 😮

[@faizanshahzad3191]

Great video. Thanks for your help

[@AndrewDoesLife]

My pleasure!

[@crypt8902]

it works 🎉 thanks 😊

[@AndrewDoesLife]

No problem! Happy to help :)

[@liiphilippo2329]

It works....Thanks

[@AndrewDoesLife]

No problem

[@patrickstinnett8151]

Just did this today and applied a small shim and it worked perfectly...10 mins!

[@AndrewDoesLife]

Love to hear it!! 👍🏻

[@radikator]

You're my hero

[@AndrewDoesLife]

You're my hero!

[@orchestranerdynerd]

8 years w that light and tpms light on and finally failed a safety inspection.. Thankyou just tried it amazing!

[@brothamarlon6456]

Thank u I just bought a 07 and I was worried this exact same thing because otherwise I have a great running truck.

[@cris-nb4lv]

Great vid

[@AndrewDoesLife]

Thank you gucci!

[@joshwexler658]

Thanks for the video, was really well done and clear. And no background music, THANK YOU! unfortunately this did not solve my issue. I even completely disengaged that harness that you rocked and it never turned off. Must have something else wrong with mine.

[@AndrewDoesLife]

Sorry about that! Hopefully you're able to figure it out

[@joshwexler658]

@@AndrewDoesLife oh nothing to apologize for. The instructions on removing the cluster helped me fix the transmission indicator which has been missing for 4 years, since i bought it. So I at least figured out what happened to that and fixed it.

[@AndrewDoesLife]

Well at least something positive came out of the situation!

[@joshwexler658]

@@AndrewDoesLife So, apparently more positive came out of it. I don't know if maybe this was an issue of both things were a problem, but i replaced the brake fluid level sensor. And then played with the harness and it actually worked. So i think i had a bad sensor, coupled with the wiring issue you pointed out. It seemed like the harness needed to be pushed towards the front of the car a bit. So i took a small postcard, folded it a few times and jammed it between the harness and plastic to keep it in pushed forward position. Super technical I konw, but that seems to be making the light behave. We'll see how long this will last, but at least that damn light is off after 3 years.

[@BigPlaneFixer]

kzbin.info/www/bejne/iKCsgYqFjtd_b5o If you're comfortable at soldering, this is the permanent fix.

[@deangailwahl8270]

You are the MAN....Thank-you. Actually after I put everything back the light came on again. However after I took everything apart and pushed forward the wire cluster the light went off immediately. I am going to try and wedge something between to see if it will now stay off after I put everything back.

[@user-ij9vm1dk6e]

I'm working on a 2006 f150. It had code for rear speed sensor, so I replaced it and connector. Code went away but light stayed. I watched your video, followed your instructions, light went out but came back on, I added a folded piece of cardboard between connector and rear of cluster. Ok for now. I believe is an issue with the cluster, I don't often try to check electronic devices, just replace. Thanks for your info hope mine helps.

[@SqualeTempo]

Thanks! It worked. QUESTION: Does anyone know what that plug is connected to the top dash plate? Mine was already disconnected when I pulled the top off...

[@eryc603]

Thanks man u save me

[@AndrewDoesLife]

I got you bro 👊🏻

[@jamesonkruger6989]

Holy shit this fixed the brake and airbag light

[@AndrewDoesLife]

Heck yeah!!!!!!!

[@sheyanderson4371]

Been admiring all the work and love you have been putting into your F-150 lately. I just wanted to recommend a channel, FordTechMakuloco, he has an entire series on mechanical upgrades and issues with the 2004-2008 F-150’s and 5.4L Triton engines. Off the top, I would look into new phasers and oil pump. I personally have a 2004 FX4 Supercab and had to replace the engine after the timing went out and put metal from the front cover into the engine. 5k later, I have a new and better engine with those upgrades and more, but it cost a lot of money, even with free labor, and a lot of headache. Just thought I would mention it, hopefully your luck continues and keep up the great work and videos!

[@AndrewDoesLife]

Thank you Shey! I love FordTechMakuloco! Been a huge fan of his channel since I got my truck years ago, without a doubt the most knowledgeable guy when it comes to these trucks and their engines. If you don't mind me asking, how much was the labor for installing a new oil pump?

[@sheyanderson4371]

Andrew Does Life FordTech was definitely a life saver for me, awesome channel I agree. As for the pump labor, I am not sure. The company I ordered my reman engine from actually updates the motors and the higher volume oil pump is one of those upgrades. I know FordTech has a step by step video on replacing it, but not sure how comfortable you would be doing something like that yourself. Wish I could be more help!

[@AndrewDoesLife]

Oh well that is pretty neat that the company makes the already upgraded engines for you. My main issue with replacing the pump myself would be that I am extremely limited when it comes to space where I live so more than likely if I had that done it would have to be through an auto mechanic with his own shop. I do happen to have a very good one that I'd go to and probably will be going to when its time to upgrade the oil pump though.

[@sheyanderson4371]

Andrew Does Life a good mechanic makes good peace of mind as well. After watching your videos and FordTechs, I am sure you would be able to do it, but the right space makes all the difference. I would just recommend the pump and phasers as soon as possible. I bought my truck from the original owner @ 111k miles. It had records of service and maintenance from a dealership shop, every 5k miles. That was actually the reason I bought such an old truck with so many miles on it. Even with that maintenance schedule, the front cover had signs of burnt oil all over when I was swapping out engines. The stock pumps just aren’t enough and it will catch up sooner or later. I now have a 5.4L the way it was meant to be and so many plans over the next couple years for my truck. Hope to send some pics and info your way for a future Truck Tuesday. All the best and keep up the great work.

[@blusti3589]

Ur the best! Never thought that that is the actual problem of the fkin brake:D Thank you mate

[@AndrewDoesLife]

Happy to help!!

[@edwincarter5932]

I know this is old, but I've heard that pulling those wire connectors off from behind the instrument cluster and cleaning them also fixes the interior and exterior cargo and parkins lights. I've got to do that with my 05 f-150.

[@redvillehomestead]

Worked for my 2006 Ford f150

[@AndrewDoesLife]

Great! No more annoying red light 👍🏻

[@froglobster]

Black Rocket just started doing this. I’ve been meaning to check the ebrake pedal in case of a sticking switch but maybe this is the answer thanks.

[@bama1fan]

The problem is a loose or broken solder in your instrument cluster. The only fix is that you’re going to have to take it out and solder it or the brake light is gonna come right back on again when you hit a bump in the road.

[@LilHercTrains]

Can you make or send a vid link on how to fix this? I just bought a truck and have the same issue

[@dude55man]

I know this is really late, but same. The fact that the light is on all the time has caused me to forget I've engaged the parking brake, and wore out the shoes XD

[@regularguy8842]

I can't believe that actually worked!?!! I have dealt with that light for 8 YEARS!

[@AndrewDoesLife]

Happy to help my guy! That light was SO annoying

[@brianheiter432]

You are a fk'n rockstar with the messaging in this video. Saved me a ton of troubleshooting.

[@AndrewDoesLife]

Happy to help Brian! Thanks for supporting the channel 🙏🏻

[@lodogg220]

Would it help pass inspection though??

[@jeremyhicokraddad_mtb8388]

Yep. Mines been on for years. Gonna pull it apart tonight

[@NorthTexasGardening]

Man, thanks. Had that light on for 11 years and this year they fail it on the safety inspection.

[@lilychu8660]

tks

[@AndrewDoesLife]

Happy to help!

[@bingnowtv]

Ahh Haa sounds like you are seating a cable. Nice to the point video. Thanks!!

[@AndrewDoesLife]

You bet!

[@bingnowtv]

@@AndrewDoesLife cool.

[@ekirenrut]

Wonder if this is applicable on an '07 E-350? Having intermittent brake/engine lights and gauges randomly dropping.

[@williamutsman579]

ive been living with this issue since i bought this truck. 2006 f-150. One place sold me a brake master cylinder to fix this . Of course it didnt work. First chance i get some time, i will give this a try

[@AndrewDoesLife]

I’ll be very surprised if this doesn’t work! Let me know

[@Papirrin-di8cy]

Did it work ?

[@alexortega812]

I can confirm it works.

[@AndrewDoesLife]

Haha thanks Alex!

[@georgestreeter3992]

What did you do besides take the dash cover off?

[@BrandonSmithroachleg]

It's going to come back on. There's a video of how to actually fix it but it's pretty complicated, seems easier to find a used cluster.

[@evanpaine5236]

Yeah this fixed mine for a while but now it isn’t going off. Do you have a link for that video you are referring?

[@BrandonSmithroachleg]

@@evanpaine5236 kzbin.info/www/bejne/iKCsgYqFjtd_b5o I ultimately had to take my son's truck to the shop because their was an issue with the computer and airbag control so they replaced the cluster in the process, but the video above is the one for the permanent fix

[@jamesmacdonald3818]

I guess its a problem with a surface mount resistor (cracked solder joint). Numbered 812 (upper left hand side. A used cluster may need that same repair. It seems common on 06 and 07 f150s. If someone is handy with a soldering iron. Just 2 tabs of solder on each side of the resistor, you should be good.

[@deemanrt]

Thanks but this didn't do it! There's an FN short so I have no idea how wiggling the connection has any chance of working but hey glad it worked for you and others. Mine still goes on and off!

[@AndrewDoesLife]

True. The core issue of this red light is a bad soldering connection from factory that fails over time.

[@deemanrt]

@@AndrewDoesLife yes sir, I found that as well. I either need to replace or repair my connection. I found a repair video but I'm not a solder guy so I'll need to find one or just replace the cluster.

[@lhodge62]

Another video showed solder on circuit board comes loose but pretty difficult getting to and almost easier replacing whole instrument panel but like buds thinking I'll wedge something into like foam rubber

[@AndrewDoesLife]

I think I have seen that exact video you are referencing. I was not going to mess around and replace the entire thing so I found this little trick to use instead haha smart not harder!

[@lhodge62]

Ditto I did the foam rubber thing but still cones on sometimes and will try and tinker some more sometime. Grateful for small wins at least and not taking whole thing apart lol

[@PanochaPeluda-lo1wg]

I try that already and the light still on what to do now thanks

[@horseman6396]

Wow, I tried just shaking the instrumental panel and light went off. Thank you it helped a lot but might need to replace the instrumental panel.

[@AndrewDoesLife]

Glad it helped! Hopefully it stays off!

[@theforeverman673]

Watched this video ... I then lightly slapped the dashboard and the light went off immediately. Thanks alot

[@AndrewDoesLife]

Haha! Whatever works I guess 😂

[@MrKenny4553]

I have a f-150 2006 and the cruise control and horn is inop but when I lock my truck with the keyless the horn sounds and the fuse is good

[@AndrewDoesLife]

I would get under the truck (on the front passenger side) and make sure the horn is correctly plugged in. Could have come undone over time