How to fix the ignition system on your John Deere AMT 600 (CDI upgrade)

[@gregorysmith3097]

Thanks for the video. I'm not having this problem at the moment, but will bookmark in case I have it in the future.

[@scottcarr4307]

Finally I found a video on one of these this is exactly my problem no spark coils bad for sure your video was a big help I'm going to check the link thank you thank you thank you

[@kingofkracovia]

Great video, better than the previous one I saw

[@deezldude]

Thanks for the info. Just picked one up free and intact. Sooo this will help tremendously

[@timmcfarland4447]

hello. where did you get these parts. didnt see anything posted in less i missed it . thanks . awesome video

[@vinnyjones9770]

Great video just what I needed. But can you tell me where the two yellow wires plug into for charging the battery mine is unplugged and I can't find where to plug it in

[@sims2bavaroTd]

Thanks so much for this video! Did you leave the old coil in the motor? I didn’t get my cover off yet. So not sure where it is.

[@SantiagosProjects]

Thanks I got the same gator 🐊 doesn’t have any spark

[@timmcfarland4447]

question . in this video you using a 4 or 5 pin cdi box ? thanks

[@williamsumner9188]

Where did you get the coil?

[@markr4421]

Can this work on twin Kawasaki gators motor?

[@markj1374]

Ty so much Josh

[@steveside773]

The link doesn't work so could you link me to the right one on another site?

[@gustavezimmler2720]

Fantastic insight indeed I have a kf82 d-x, so it doesn't have a stator coil but uses 2 linear coils of which one for the ignition spark and one for the battery charging It does have a small pick up coil too My question is does anyone know which type of cdi unit I can adapt, should I use an ac cdi unit or an ac cdi unit The coil for the battery charge goes to a small rectifyer diode bridge so both ac and dc are available I'm also trying to find out what is the belt size on the commuter te 390, is it a C 41 belt? Keep on posting these helpful videos, great stuff!

[@robertrenaud2454]

Can you talk please tell me how I can get a hold of royce. I tried to look him up, and I can't find him or that coil and CDI. A part number would help immensely. And thank you very very much I almost bought a stator for $400. You're the best

[@gustavezimmler2720]

I meant should I use an AC cdi unit or a DC cdi unit

[@georgeoliver7945]

electronic ignition worked great. Thanks for video. Do you know how to adjust chains on amt 600

[@metalinmotionshop]

I feel like they had spring rollers that automatically kept tension on it. Im not certain since this job already left. That was the first and only one I’ve worked on.

[@KyleSmall1000]

Thank you. Going to try this on my AMT 600. Can you tell me exactly which CDI box you bought? A lot of them out there and don’t want to get the wrong one.

[@metalinmotionshop]

That link is out of stock. This is a different supplier but looks like the one I used. Its a DC volt 4 pin. cdi box with coil. www.ebay.com/itm/DC-4-Pin-CDI-Box-Ignition-Coil-Quad-ATV-Dirt-Pit-Bike-Go-Kart-50cc-300cc-Lifan-/265344698497?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0

[@CarlosRodriguez-ld8zp]

Where did you pull the 12v from. The key switch?

[@metalinmotionshop]

Yes. There was an extra un-used switched 12v on the key switch I bolted too.

[@sims2bavaroTd]

Anyone know where to get the pick up coil

[@AaronGudenkauf]

The ebay link that @Metal In Motion Shop posted in the above comment includes the CDI box and the pick up coil.

[@williamsumner9188]

Who know where to get a trigger coil?

[@williamsumner9188]

Try again would you know where to get a trigger coil.