How to Fix Whirlpool Cabrio Washer F7E5 Error Code | Not Washing or Spinning | Model

In this Video, We Have a a Whirlpool Cabrio Washer, Model WTW8500DC5, In Which the Complaint Was that it was Not Washing Nor Was it Spinning. Also, It was Flashing a F7E5 Error Code Once We Put it into Tech Mode. An F7E5 Error Code Means that there is a Problem with the Shifter of the Washer. After Checking, We Found that the Slider and the Rotor Were Stripped and Not Engaging With Each Other, Causing the Error Code and Both Needed Replacement. If this is the Issue You are Having with Your Washer, Make Sure to Watch the Entire Video to See How to Repair it Yourself, and Save Some Money.
Please Like this Video, Share and Subscribe for Future DIY Videos. Support Our Channel by Using the Affiliate Links Below. If You Can, You may Also Leave a Tip Below. Thanks For Watching and for the Support.
Slider:
Amazon: amzn.to/3FmK4C7
eBay: ebay.us/KZtQu6
Rotor:
Amazon: amzn.to/3Fmpfqs
-eBay: ebay.us/n2jCYB
Mentioned in Video:
Affordable Drill: amzn.to/3QmTW5q
Torx Bit Set: amzn.to/3S9i3Wp / amzn.to/4072j8g
Torx Screwdriver Set: amzn.to/46UBh6g
Mini Screwdriver: amzn.to/3QlhnM0
Loctite Thread Lock (Locknut): amzn.to/3QlhnM0
Active Washing Machine Cleaner Tablets: amzn.to/3MahyHB
Screwdriver Set: amzn.to/3PZ68so
1/4 Bit Set: amzn.to/3PE8hZb
Find Some of Our Faves on Our Amazon Storefront!! ➡️➡️ amzn.to/3xPs2rI
Sign up For a FREE 30-Day Trial of Amazon Prime and Get Your Appliance Going Faster! CLICK HERE: amzn.to/3BA7Erj
IF Your Washer Machine is Missing its Tech/Service Manual, You Can Go Here: www.manualslib...
Watch and/or Listen to Our Podcast, Appliance Talk:
KZbin ➡️ • Appliance Talk
KZbin Music ➡️ • Appliance Talk
Spotify ➡️ open.spotify.c...
More Videos That Can Interest You:
Maytag Washer F9E1 Error Code: • How to Fix Maytag Wash...
Whirlpool Washer Not Agitating or Spinning: • How to Fix Whirlpool W...
Whirlpool Washer Leaking Water: • How to Fix Whirlpool W...
If this Video Helped you in any way, Consider Leaving a Tip:
Buy Me a Coffee: buymeacoffee.com/diyrepairsnow
PayPal: @diyrepairsnow
Venmo: @diyrepairsnow
*Please note that Links are Affiliate Links, Which Means by Using them We do Get a Small Commission. This Means You Can Support the Channel at No Extra Expense to you. Thank you for your Support.
Warning: Please Be sure to Unplug Any Appliance Before Starting any Repairs! This video is to help DIY's do the repairs themselves, at their own risk. DIY Repairs Now, Its Technicians and/or Its Affiliates are NOT Responsible for Any Property and/or Personal Damages, Including Serious Injury and/or Death. Please Be Advised, as You have Been Warned.
My Filming Equipment:
Canon M50: amzn.to/2WUHlY5
Rode VideoMicro Compact Mic: amzn.to/2TqKTzo
Canon M50 Mount Adapter: amzn.to/2MZv84t
Joby GorillaPod 3K: amzn.to/2Fn3jgd
GoPro Hero 7 Silver: amzn.to/2UNHImN
GoPro Hero 7 Black: amzn.to/2TnPXVd
GoPro Accessories Kit: amzn.to/2OnilpG
For Business Inquiries, Please Email [e-mail]
Thanks for Watching and be Sure to Subscribe for more HowTO/Repair Videos!
DIY Repairs Now
#appliancerepair #appliance #appliances #kitchenappliances #homeappliances #repair #dishwasher #kitchen #refrigerator #home #fridge #refrigeratorrepair #oven #washerrepair #homeappliance #authorized #washingmachine #dryer #ovenrepair #service #stove #freezerrepair #dishwasherrepair #maintenance #washer #kitchendesign #dryerrepair #stoverepair #applianceparts #bhfyp

[@tweety3995]

Thank you so much!! My dad replaced the motor unit and when we put it back together he pushed the secure clamp back too far. We didn't realize it had a special groove to go into, so we got the mentioned error codes. I was watching your video while he was reassembling it a second time and said wait dad, something has a "special spot", 😂, and we realized what was done wrong the first time. Bot of us have pretty bad vision and we hadn't noticed that. So, thank you!!!!

[@DIYRepairsNow]

You're very much welcome! Happy to Hear You Found my Video Helpful! Thanks so Much for the Support!

[@nelsonrodriguez6967]

This has been the best video I was able to find to fix my washer. Gives you part #'s and DIY instructions well explained. Thanks!

[@jimmylanders4754]

Thank you my guy I replaced both the rotor and slider and I'm back in business God bless you I'm so excited 😆❤

[@DIYRepairsNow]

Glad I could help! 👍🏻

[@karl5997]

Thank you for this great video. I am sure this is the problem. My Whirlpool Cabrio is 8 years old, and has been great until this last year when I have replaced one issue after another on it. I think it is time to give up. 😖

[@JGoodZX6R]

Same. 9 years old and have replaced a few parts already. Now this. My mom’s 33 year old washer is still running just fine. I hate new appliances.

[@hungryfortruth8608]

Hello I watched your video and it was wonderful! I pulled off the stator and it is a white one and the teeth are ground down but not as bad as the one in your video and the connecting piece on the washer with the spring on it was not ground down. I'm wondering if I'm about to the correct part. stuff that I looked at said shifter actuator but I don't see a shifter actuator on this one unless it's underneath the rotor. Is this the part since it doesn't have a belt like the other videos of shifter actuator repair videos or could it be something different. I just don't want to order the part if it's not the right thing. Can you please let me know what you think when you get a minute?

[@nb6584]

Very helpful!. Thank you so much!. Saved me a lot of $$

[@DIYRepairsNow]

Great to hear! I am Glad My Video was Helpful!

[@jsmall5952]

Thank You helping me figure out what is wrong with this piece of crap now I will never purchase another touchscreen again. Already replaced lid lock twice now got two new codes but video definitely helped me get the codes thank you! Wish me luck

[@DIYRepairsNow]

Thanks for sharing! I am Happy My Video Was Helpful, Hope You can Get it Fixed! Thanks for Watching!

[@mattcarleo2521]

Thank you sir! Worked perfectly, however, I did not have to replace the rotor. Appreciate you

[@DIYRepairsNow]

Glad it helped! Thanks for Watching!

[@matthewatowe2009]

This was an awesome video with good step by step instructions I followed them and was able to replace the parts with almost to issue. Thank you for the knowledge #KeepJESUSFirst

[@DIYRepairsNow]

Great to hear! Happy My Video Helped With Your Washer Issue! Thanks for Watching!

[@patrickmccarthy8035]

Excellent clear and concise 👍

[@DIYRepairsNow]

Glad it was helpful! Appreciate the Support!

[@1407pdr]

My new rotor doesn’t go on far enough to apply the screw to tighten

[@DIYRepairsNow]

@@1407pdr make sure you clean the treads and make sure you order the right part

[@mattstephens1333]

Great video, it saved me $300

[@DIYRepairsNow]

Glad I could help! Thanks for Watching!

[@davekaiser4]

great job please keep up the great work the video is easy to follow 👍 thank you

[@DIYRepairsNow]

Glad it helped! Thanks For the Support!! 👍🏻

[@gbsavc]

I wish this was my issue. You made it easy, but my teeth were fine.

[@lalo61]

Thank you very well explain

[@DIYRepairsNow]

Glad it was helpful! Thanks For Watching My Video!

[@JeanFisher-o8u]

I replaced these parts but now I start the washer, it seems to be sensing by the drum going around slowly and stopping, then it just turns off. Any suggestions what to do next?

[@DIYRepairsNow]

@@JeanFisher-o8u turn it off for a couple hours to reset the computer board, then start a rinse and spin, cycle or quickwash

[@kennethoquinn4216]

Replaced the rotor, slide assembly, and clutch, same error code after testing. Any ideas? Thank you😊

[@kennethoquinn4216]

Never mind, ended up finding broken wires to the clutch, all fixed now. Thanks for the video, it helped set me on the right track 👍

[@YaimR-q5g]

I pulled mine out just to check and the back plastic was all broken.

[@craigdieter6960]

Hey, I have the exact same washer in the video. but recently everytime I start it the display flickers looks like the display turns off for second and then the lid locks and the display turns back on and it starts up like nothing happened and when it gets down to the last minute it just get stuck at a minute and doesn't finish the cycle, do you by any chance know why it's doing this? Never done this before? I appreciate it if ya got any ideas on what it could be.

[@luisalomeli7182]

Same issue here

[@robamaya7433]

Hello, I changed out stator, rotor and clutch and I'm still getting P7 E5 codes.

[@jasonx9]

my rotor and slider are damaged but also appears to be grease slung everywhere are the bearings shot? is there a way for me to check end play?

[@SeanGilbert-vr1qg]

Is this the f9. E1 fix vvidio...

[@SeanGilbert-vr1qg]

Are u there

[@malenagarcia4967]

Those parts works as well for the whirlpool cabrio WTW7000DW

[@SeanGilbert-vr1qg]

What's a f9. Ei codeea

[@DebbieStocks]

I have the error code E5F7 but I only have an issue when I’m on the power wash cycle.

[@christinanightin9979]

I can read that part code. Anyone have it?