How to Fix: Your Garage Door Remote in 10 Seconds!

Garage door remote not working? Don't take it to the repairs just yet...try this first! Some older models require you to change the frequency by changing the door code. If it doesn't work the first time, keep changing it until it works!
ATA Securacode
www.ata-aust.c...
CODING TRANSMITTERS
15
STEP 19 - SETTING THE TRANSMITTER TO
OPERATE THE COURTESY LIGHT
The transmitter can be programmed to operate the courtesy
light on the door opener.
1. Press and hold Light Code button.
2. Press the button on the transmitter you would like to use to
switch on the light for two seconds
3. Pause for two seconds. Press the same button again on the
transmitter for two seconds.
4. Release all buttons to store the transmitter in memory.
5. Press the transmitter button to test if it switches on the light.
19.1. ADJUSTIING COURTESY LIGHT TIME
The preset courtesy light time on the Door Opener is 3 minutes.
This time can be changed as below.
1. Press and hold the Auto Close Time and Force Margin Set
buttons together .
2. While holding the two buttons, press the green Open
button . Each press will add 10 seconds to the light
time.
3. To decrease the time follow step 1 and press the red Close
button . Each press will deduct 10 seconds from the
light time.
4. To recall the factory set default light time press and hold the
Auto Close Time, Force Margin Set and Reset buttons
together for about 2 seconds.
20. DELETING PROGRAMMED CODES
20.1 DELETING A STORED TRANSMITTER CODE
1. Select the transmitter you want to delete.
2. Press and hold the Door Code button
3. Press the transmitter button you would like to delete for two
seconds.
4. Pause for two seconds. Press the transmitter button again for
two seconds.
5. Release the Door Code button. The code should now be
deleted. Confirm this by pressing the transmitter button, the
door should not respond.
20.2 DELETING ALL STORED TRANSMITTER
CODES
1. Turn the power off to the opener.
2. Press and hold the Door Code button
3. Turn the power on again, while holding the Door Code
button. Release Door Code when the Coding LED illuminates.
4. All the stored codes including the courtesy light codes
should now be deleted. Confirm this by pressing the
transmitters previously used to operate the door. The door (and
light) should not respond.
#productreview #review #productreviewer #reviews #producttester
#producttesting #amazonreviewer #reviewer #amazon #productreviews #amazonfreebies #amazondeals #influencer #freestuff #free #amazonprime #blogger #freebies #amazonreview #reviewers #amazonus #giveaway #freeproducts #coupons #howto #diy #tutorial #youtube #tips #art #love #video #handmade #doityourself #instagood #motivation #creative #youtuber #craft #design #howtoperfect #howtomake #technology #learn #tipsandtricks #food #homemade

[@oceans2533]

Thanks The agent asked me to go to their service centre. That meant messing around and like a tyre place they could have said that the remote needs changing and tried to sell me another one. Then I came upon your site. AND hey presto it worked. Saved me money. Thanks.

[@7divad37]

I know this is an old video, but it totally solved a fob programming issue that the b&d instruction manual couldn't. Old B&D RX-2 opener with new remotes..

[@mr.kolchak7478]

Worked. Beautiful.

[@waynemudge]

Perfect fix. But just be sure the little remote is really close to the motor when reprograming

[@jayejaye2320]

I love you. My garage door is working now. Thanks a lot. 😂

[@ktnguyenn3166]

Omg thank you! My Garage was stuck on number 1 but couldn’t function properly so I change it to number 2. Works perfectly now. Such a simple method but my head was going around in circles haha

[@MeettheTings]

Np!

[@celenafay4918]

Thanks so much for this!!!! This worked for me. Made my day.

[@lilin599]

thanks so much , such easy, it is better than the manual from company

[@lilin599]

👍

[@sandraholder5260]

Kia ora... Just what I needed to know... X

[@user-qy5bk8ci8w]

Nice one thanks for sharing

[@MM-qd3kc]

Thank you very much for the video. It’s really help me.

[@jupupable4101]

Thanks, worked well on my securalift door.

[@PlongSamedy]

It worked! Thump up!

[@natolekidane6079]

It works. Thanks man

[@praveenpathmanathan8096]

It works well, thanks

[@shylostar7736]

Thank you!

[@bohemianearspoon]

Thanks, that worked.

[@VS-go4un]

Many Thanks, your video was helpful!

[@ozsalty]

Hey mate....I just watched your vid about the mud crab....many laughs from me and me mates....very funny...even though ya weren't trying to be....

[@MeettheTings]

haha thanks, that was ages ago...I've since learned to eat them efficiently at a restaurant lol

[@stuartwalton5251]

Simple and works

[@l0rdstrontium]

Thanks mate , really helped me out

[@georgeriszko]

Securalift remote tuning

[@michael_toms]

Thank you for your help, greatly appreciated.

[@HOITYCOITY]

Hey, I have this garage door opener do you know if this thing can be wired? Wanna put a smart opener on it but needs to be wired.

[@MeettheTings]

I've been thinking about putting a smart opener on this too. I think it can, I read somewhere in the manual that it has that feature. Check out the link to it: www.ata-aust.com.au/AtaAust/media/Manuals/GDO2v6-Manual.pdf

[@HOITYCOITY]

@@MeettheTings if you find it let me know what page lol.

[@MeettheTings]

@@HOITYCOITY oh page 4 it mentions "14. O/S/C INPUT is for connecting the wired Wall Switch (optional extra) ." not sure if that's extra?

[@sn3azr]

Hi any idea why my status light is continually on? I think it’s the reason I cannot code me new remotes

[@MeettheTings]

Is it the same one as the one I have?

[@sn3azr]

@@MeettheTings yes same garage door board

[@KennyGsca]

My Blue door code wont beep or do anything when pressed or long held press to do the steps In the video

[@MeettheTings]

what brand is your lifter?

[@TH-tc3sp]

Having the same issue with mine. Same brand, Securalift.

[@MeettheTings]

@@TH-tc3sp Check your remote, I did another video on cleaning the connection for the battery. Mine had some corrosion and I sanded it away. Haven't had an issue since!

[@TH-tc3sp]

@@MeettheTings Turns out the frequencies are way off.

[@MeettheTings]

@@TH-tc3sp oh nice...I haven't looked into frequencies yet cos I didn't know how to adjust it...that was another thing I had considered...was it my neighbour's garage that was interfering? Was it their door bell? etc.

[@DarshanaSomirathne165]

What is that remote.s name

[@MeettheTings]

ATA Securacode

[@simonbeddoe8368]

Didnt work

[@simonbeddoe8368]

And its the same process for Deleting all codes as re-setting a code?????????????

[@MeettheTings]

You should check the description, I put the instructions there for resetting code

[@simonbeddoe8368]

@@MeettheTings Thanks, I did check ALL the instructions and followed them BUT still doesnt work. Again if you look at instruction 19 and instruction 20 they are the same for deleting a code and re-setting a code?????