How To: GE Evaporator Fan Motor WR60X23584

How To Replace: GE Evaporator Fan Motor WR60X23584 www.appliancepa...
Symptoms: starts making noise or motor stops running completely, causing the temperature inside the refrigerator to rise.
Tools: Phillips screwdriver, small flathead screwdriver, 1/4" nut driver, 5/16" nut driver.
This GE made Refrigerator Evaporator Fan Motor replaces the following older part numbers on General Electric, Hotpoint, RCA, Sears and Kenmore Refrigerators: WR60X10346, WR60X10045, WR60X10046, WR60X10072, WR60X10138, WR60X10141.
Buy the new Refrigerator Evaporator Fan Motor WR60X23584 here: www.appliancepa...
Most orders delivered in 2 business days or less.
If you enjoyed this video, please click the like button. Subscribe to this channel for more appliance repair tutorials.
If you need any more technical advice, call us at 1-877-477-7278 or chat with us on our website www.appliancepa.... We're available 7 days a week.
For more appliance advice, information, and tips, follow us on social media.
Facebook: / appliancepartspros
Twitter: / applpartspros

[@stevencruise4849]

The ideal video for this motor replacement. Excellent pointers on how and when to remove and replace the retainer clip were especially helpful.

[@waynewithaplan1546]

Thanks bud your a life saver. One thing. My freezer had a wire shell in it that was inserted into two holes above the ice maker on the left and another pair of holes on the right side of the freezer. Had to use a pry bar to get the shelf out of the holes.

[@janineramirez4984]

This video was so helpful. I changed the motor myself in no time and saved a bundle! Thanks!!

[@DataWaveTaGo]

Our Evaporator Fan was making terrible noises with the temperature fluctuating in the fridge section. I removed the unit and found the grommet on the shaft side had partly disintegrated with bits falling into the fan shaft dome that rubbed on the shaft collar inside. I used a safety pin, a wire brush for car detailing and an X-acto knife to remove dozens of bits from inside the dome. That took 20 minutes. The rear grommet was OK, so I swapped front to rear grommets & reassembled everything. The fridge is now back to running without much perceptible noise of any kind and the temperature is stable again

[@Alvin.Tostig]

Excellent video. Not mentioned specifically (but implied) but if you’re wondering like I was it is not necessary to shut off the water supply before removing the ice maker.

[@chingdowkenpo]

Man you are the best on youtube thank you brother

[@louisianafatbastard]

Most excellent video! Thank you very much. It made changing my fan motor out very easy. I would suggest that you replace the two rubber bushings while you are changing the motor as they are only $3.00 each .

[@normavideos8459]

I like the video very clear 👏👏

[@nerdcave0]

5:03 How far should the fan blade be recessed relative to the panel? Does it matter?

[@lothairebluteau4991]

the best explanation , great teacher ,clear and succinct . Great Teacher

[@appliancepartspros]

Thanks for your feedback! Glad we were able to help you with your repair.

[@hansu327]

Thank you! Amazing!

[@AlbertInSanAntonio]

I did this .. still not working 😾.. I hope it's not the control board 🙄