How to get rid of air leaks on your OM606

[@jonathantrilles8613]

For 2 days I was stuck and couldn’t get my car to start. Thanks to you I managed to bypass the fuel heater and pre filter and found out my air leak actually was situated between the lifting pump and filter. Now it starts and runs like a clock. I cannot thank you enough for the tips!

[@shabandipandip8448]

I'm trying this method I don't if you need mechanical fuel pump for this

[@TheGalifrey]

Hi Shane, just got round to doing this and fitting your fuel shutoff delete, would just point out the barb on the shutoff delete is too small for 3/8th 10mm fuel hose, it's the same size as the stock barbs haha. All works BTW but throwing up an engine electronics code despite leaving the fuel shutoff connected electrically. Will investigate tomorrow. I haven't' put the manifold back on yet so might be the other vacuum lines throwing the error.

[@LSXREVIVAL]

Nice video thanks !

[@peter7914]

I need to do this , wondering how do I make sure diesel won’t be spilling out

[@JohanForsman-pq6tb]

I just placed an order for 2ea. of your shut of valves. I have a comment on your video though, correct me if I'm wrong but the way I understand it, there's no reason to cut the line from the lift pump to the main filter (just keep as is).

[@Lerssi609]

Does it work on the om602 all so?

[@joepark562]

Can you tell me details of banjo bolt to eliminate the shut off valve?

[@BenzInjection]

www.benzinjection.com/product-page/edc-shut-off-valve-delete

[@booobies11111]

​@@BenzInjectionstupid question but... If that gets deleted how will it shut off?

[@BenzInjection]

@@booobies11111 The computer tells the EDC on the pump to pull the rack back, which shuts down the fuel delivery. That's how it is done on mechanical pumps anyway. The SOV is just extra to make it shut down quicker.

[@BenzInjection]

@@booobies11111 The computer tells the EDC (electric governor) to pull the rack back, which cuts off fuel.

[@shabandipandip8448]

Hi what's o ring size I bought shutoff valve kit I need some o ring

[@skellysgarage1095]

Where u have the feed from tank to lift pump before you cut that line and put the feed on that same port goes to a port under the shut off valve do i need to blank this off when i cut the hose for the feed or is it okay to just cut the hose ahd leave it open?

[@LSXREVIVAL]

Hi, What about the shutoff valve ? How does it turn off then?

[@BenzInjection]

The computer pulls the rack back, cutting off fuel. The shut-off valve just makes its about 1 second faster, but not needed.

[@LSXREVIVAL]

@@BenzInjection thanks for answering . Can an603 filter setup be used on it then? I'm wondering if the sean tracey tune will block that code from going off

[@TheGalifrey]

3/8ths or 10mm fuel hose is what you need

[@1catchmekiwi]

I'm having problems i just install new shut off valves from Benz injection shut off valves is leaking I follow this video step by step.. car start 3 second cut off can any help me

[@BenzInjection]

Did you install the o-ring on the back of the plate? Send us an email.

[@1catchmekiwi]

Yes I did

[@jorgevazquez-fernandez6628]

what did you use to block off or plug the prefilter in & out?

[@BenzInjection]

Nothing. They can just be left open, same with fuel heater.

[@jheric0ol]

So you bypass the pre fuel filter as well ? Or am I missing something

[@shanecall]

Both pre-filter and fuel heater

[@peterszollosi2778]

​@@shanecall how is it going? Your car starts well? I want do this too, but i dont want to bypass shut of valve, because i bought a new one

[@shanecall]

@@peterszollosi2778 you can leave the shut off valve if you want

[@shabandipandip8448]

Is this stock pump you using..did you only change the shutoff valve ..no other upgrade

[@BenzInjection]

yes, stock pump from the junk yard

[@shabandipandip8448]

Im getting fuel leak right by shutoff valve I get from your website benzinjection bought hybrid turbo with ecu stage 2 tune and I'm using stock pump only shutoff valve deleted no other changes

[@BenzInjection]

@@shabandipandip8448 Did you install the o-ring on the back of the plate? Send us an email.

[@loganl3478]

I did this. Followed all of the steps but when I try to shut my car off it seems to want to start running away? I don’t understand what I did wrong?

[@shanecall]

It's normal. Nothing to worry about.

[@loganl3478]

@@shanecall even if it kicks the idle up A lot?

[@shanecall]

@@loganl3478 yes. It's normal with EDC pumps. I imagine that's why Mercedes made a SOV for it. Not a big deal.