How to Grind Concrete with an Angle Grinder | Dustless Technologies

5" DustBuddie for Hand Grinders:
dustlesstools.com/product/5-d...
7" DustBuddie for Hand Grinders:
dustlesstools.com/product/7-d...
If you're fixing a heaved sidewalk, a cracked slab, or an uneven floor, we'll help you understand how to grind concrete with an angle grinder. We'll show you how to install the proper safety equipment, including a dust collection shroud and tips that will help you achieve the highest quality finish.
00:00 - Introduction
00:06 - Choosing a Grinding Disk
00:16 - Install Dust Collection Shroud
01:02 - Wearing Protective Gear
01:08 - Clean the Concrete Surface
01:13 - Proper CFM Requirements for Dust Collection Shroud
01:25 - Grinding Concrete
01:55 - Clean the Concrete Surface
02:11 - Outro
#anglegrinder #concrete #construction #dustcollection #dustextractor #installation

[@Esiddik]

Mannnnnn another one !!! 😂😂😂😂 I am so hurt right now! I needed this video 2 years agoo

[@Dustless]

Hopefully not physically hurt 😰 Glad you found the video helpful! If you have other content suggestions, we'd love to hear them. In the meantime, you can always give us a call (800-568-3949) or email ([e-mail]). Good luck out there and Make it Dustless!

[@jandone100]

What about wet grinding? Any advantages to dry grinding?

[@Dustless]

There are a few advantages to dry grinding. 1) Dry grinding does not obscure the surface that you're working on, making the surface easier to see and evaluate. 2) Wet grinding could cause harm to your equipment, specifically rust. 3) Last, but potentially most important is the fact that dry grinding (with a dust collection shroud) allows for immediate capture of removed contents. Dust can be captured at the point of origin, rather than swept up later, or vacuumed up separately after you've created slurry.

[@jeffbauman5447]

Can I damp the surface prior to also minimize the dust or does it turn into a sludgy mess?

[@Dustless]

It depends on how much moisture you add. If you add a small amount of water to the surface before you start, it shouldn't create a ton of slurry. If you are continuously adding water, you'll definitely get slurry. With a dust containment shroud such as the DustBuddie for Hand Grinders with a vacuum of 125 CFM+, moisture is not necessary to contain dust. Let us know if you have any other questions.

[@tileslay6543]

Almost had me😂. I thought you were using a 1773Ak bosch. If you’re doing a lot of grinding it will burn up a normal grinder and he dust though out a regular vacuum, making them pretty worthless. Lots of companies make grinders and self cleaning vacuums for this intended purpose. Have had very good success with Bosch.

[@Michael_78]

I'm a flooring contractor and just got the Bosch 14 gallon self cleaning vacuum for grinding high spots in concrete and thinset under tile. Also got the 5 in Bosch surface grinder. Can't wait to use them.

[@Dustless]

Thank you for sharing your expertise on grinders! We can't make recommendations for which grinder's best for you, but we can recommend our DustBuddie for Hand Grinders for most users because it fits most major brands and models of hand grinders. We didn't mention it in this video, but we also sell a Wet+Dry Dustless Vac (D1603) and a HEPA Wet+Dry Dustless Vac (D1606), each of which with 130 CFM and semi-automatic or automatic filter cleaning. Let us know if you have any other questions!

[@Dustless]

Let us know how it goes! @@Michael_78

[@boots7859]

Great that you mentioned it was important to pick the correct grinding wheel, and then not giving any actually useful details.

[@Dustless]

Sorry we missed that! Diamond cup wheels are preferred for grinding concrete because they're durable and leave a smooth finish. 4" cup wheels may be used for smaller, more detailed jobs. Where 5-6" cup wheels help cover large areas. If you're still uncertain on which cup wheel to use, then we'd love to hear what you're working on and how we can help with the project. Just give us a call at 800-568-3949 or email us at [e-mail].

[@d7samurai]

at 2:00 there's a huge sore from the grinder in the middle of the slab

[@Dustless]

Correct, we need a new demo slab! Shallow passes, steady hand, light pressure - key to smooth concrete! Choose quality diamond discs and fix cracks beforehand for even results.

[@alaskanman825]

Id say the first step is picking the right grinder. Which is what im trying to find out. What is the minimum amperage?

[@Dustless]

You don't necessarily need a minimum amperage to grind concrete. That being said, higher amperage usually correlates with higher grinding speed. Somewhere between 8-13 amps should work for most applications.

[@alaskanman825]

@@Dustless Thank you!

[@manuelrayon3891]

Do not use a dust mask when grinding! Use a proper respirator with at least P100 filters. At the VERY least, use an N95 mask.

[@fauzee]

The important part is the right disc. Dust can be vacuum later

[@Dustless]

You can choose to vacuum afterward, but airborne dust travels several feet at a time, making the area that you have to clean up large. It also settles in places that may be difficult to or impossible to vacuum up, including your lungs!😷

[@fauzee]

@@Dustless yes, after I try myself the dust is very disturbing, make you difficult to breath. I use mask since I don't have that vacuum gadget and than only I can finish my job 😊

[@memy8681]

Too much drama

[@phillarsen1104]

"promosm"

[@Dustless]

Thank you for watching!