How To Harley Davidson Road King Clutch Adjustment.

[@roadtaco3924]

Thank you sir. Feels so much better on my 05 RK. Appreciate.

[@TwoWheelRocco]

Happy to Help, Thank you for your Sub Michael. Ride Safe and have a great day.

[@KD-ix1xx]

Fully appreciated the tips for this DIY adjustment for Road King specifically.. great presentation, thank you!

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and all your support KD. Love these Road Kings. Ride safe and have a great day.

[@thisisme.4555]

Super great vid. You show how to do it better than the rest. Thank you

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for your watching and all your support thisisme. Ride safe and have a great day.

[@ragnarrock8747]

Thank you Rocco for an awesome tutorial.The information is gold..Greetings from a fan in the Philippines...Mabuhay!

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub.Ragnar. Ride safe and have a great day.

[@joeremer]

Thanks for this video! This is my first harley. I have a 2015 road king. With the Handel pulled all the way in it jumps when going into first gear so im going through videos and yours are very easy to follow.

[@TwoWheelRocco]

Happy to help, just make sure you have a little play in your cable, If that doesn't correct it then it's at the hub. I would believe it's at the pin at the hub needs to be adjusted. Let us know how it works out any questions just ask, welcome to the sport and good luck with your new ride. I love Road King. Thank you for all your support Joe. Ride safe and have a great day.

[@chadbrown1711]

I have a 2003 Road King. I just needed a refresher. I'm gonna adjust my clutch while waiting on some loctite to cure on the 1994 fxr lowrider, (my other bike). Thanks for posting this.

[@TwoWheelRocco]

Happy to help, If you have any question just ask. Thank you for watching and your Sub Chad. Ride Safe, Have a Great Day.

[@MountainSide719]

You are the man Rocco!!!! I can't thank you enough for your time and great info on all your vids bro. I just got me a 2007 Road King and *THANKS TO YOU* on some of your vids I was able to do the job. Now I will do this tomorrow because I'm thinking it needs it. Sometimes hard shifting gears after I've been riding. The bike only had 1600 miles so sat around all its life time. I've already put more miles in the last 4 weeks then when I got it. Thanks again.

[@TwoWheelRocco]

Happy to help, Any questions just ask. Thank you for your Sub Mountain. Let us know how this works out. Ride Safe and have a great day.

[@MountainSide719]

@@TwoWheelRocco Yes sir! I'm actually going to take you up on that offer! So, I threw the trash and couldn't wait to see the slack. I will still do this tomorrow but I pulled my cable from the clutch lever as you did at the end of the video.. ... ...OMG!!!! I got close to 1/4" of pull!!!! I bet I could fit 3 nickles. I put one and wasn't even close. My question is.. ...since I have that much slack can I adjust just the cable in front of the motorcycle or do I still have to do the same steps?

[@TwoWheelRocco]

Start with the cable and see how it feels. Now the adjustment at your clutch hub is to make sure there is proper free play at the hub. check it. Let us know how this works out.

[@MountainSide719]

@@TwoWheelRocco Thanks you so much for the quick reply will do.

[@MountainSide719]

@@TwoWheelRocco Alright got er dun. Went for a cruise and feels good, also noticed it is much easier finding neutral. Before I could but a pain when standing still. So I would catch it before I stopped if I wanted it in neutral.. Now very smooth and easy. Thanks again. Greatly appreciated.

[@misterklein3687]

Thanks Bro, your tips helped me a lot, ohh yeah, you deserve a million like's Man👍🤝

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching all your support Mister Klien. Ride safe and have a great day. love those Road Kings.

[@mavic6155]

If my 1996 Roadking has troubles going into neutral when the engine is running.. I guess it is time to adjust the clutch. So thank you for this video.

[@TwoWheelRocco]

Happy to help. Sometimes the older bikes will have a problem with neutral. Try to give it some gas and try to shift into neutral. Or roll the bike backwards to move the tranny and shifting into neutral. If all fails then try the adjustment at the hub. Thank you for watching and your support Mavic. Ride safe and have a great day. Let us know how it works out.

[@johnthomas1919]

beautiful as always. Good luck with the hurricane on its way, be safe.

[@TwoWheelRocco]

Thank you For your support. Have a great day.

[@daniellshine7971]

Thanks again for another great video containing info we're all gonna need to use down the road

[@TwoWheelRocco]

Thank you for all your Support, See you soon my Friend. PS My AC is down..

[@gjoniny]

If the clutch is too tight will it cause Clutch to slip in higher gears like 5th or 6th. I put in a new clutch lever and I am new to Harleys.

[@TwoWheelRocco]

Yes it will.....Adjust 1/2 out free play at hub, 1/8 at your clutch handle. Take a look at this video..kzbin.info/www/bejne/r3alY6BuorCkopI. Hope this helps. Any questions just ask, Let us know how this works out. Thank You for your Sub NY...Ride Safe and have a Great Day.

[@rebecca4571]

I am not very competent in fixing things. But I’m trying to learn so I can help somebody I love fix their bike. Any tips?

[@TwoWheelRocco]

Happy to Help. Any questions just ask. Thank you for watching and your sub Rebecca. Ride safe and have a great day.

[@babybugspaw7085]

Thanks again for sharing, any help would be gracious, (trying to adjust my clutch on 2016 Road King inside the primary case) my center nut inside cover of my primary case is deep & can’t get to it to adjust clutch without stripping the center nut and still holding the Allen wrench screw, could I use an impact (battery operated) to try breaking the nut loose and is everything spinning inside the gonna mess everything up? Any help much much appreciated.

[@TwoWheelRocco]

Try placing it in gear and see if that impact would work you won't hurt nothing. Let us know how it works out.

[@babybugspaw7085]

@@TwoWheelRocco Thank you!

[@haroldwiser2641]

Thanks Rocco! 👍

[@TwoWheelRocco]

Thank you for your Support Harold. Ride Safe and have a great day.

[@christovonlimbo]

Thanks! Great supplement to the manual.

[@TwoWheelRocco]

Happy to Help . Thank you for watching and your Sub Quixote.. Ride Safe and have a great day.

[@scottytroublefield205]

Okay. First let me say thank you so much for your help and knowledge. I should have checked the oil level when I first adjusted the clutch but when I did that part I said it was still creeping forward. So I ordered some Lucas Oil 20w50 just like you told me to try and when I took the primary cove off this time I checked the oil level and it was low, and grayish black (only 26oz my measurements came out), so I put in the Lucas oil (38 oz by my book) and readjusted the clutch and so far it seems to be doing well. Does that sound right to you????? Thank you so much for your help.

[@TwoWheelRocco]

Happy to hear all is working out. Yes, that does make a difference. Thank you for watching. And all your support Scott. Ride safe and have a great day. Any questions just ask.

[@scottytroublefield205]

I have a question please. I have adjusted the clutch like the video but my cover had a o ring in the cover and the one I ordered that said fit my 2009 RK was a solid one like you have in the video, does it matter which one is used?

[@TwoWheelRocco]

Usually it will have the gasket, but you have the O-ring so I'm not sure what primary derby cover you have. As long as it goes on smooth and there's no interruptions in your primary cover, you should have no problem. Let us know how that works out. Ride safe and have a great day Scott.

[@thejerseyj5479]

At the 4 minute mark you said to give the allen 1/2 turn. But I could swear I saw you bring it back to the original position. Am I missing something here ?

[@TwoWheelRocco]

Happy to help. Turn it until you have resistance and then turn it back 1/2 turn. that's it. Thank you for watching and your support jersey J.. I know it's cold up there. But you'll be riding soon. Have a great day hope this helps

[@andymena301]

Nice I like the detail and explanation tku I have a 03 king pretty much same thing tku again

[@TwoWheelRocco]

Glad it helped, Any questions just ask. Thank you for watching and your sub Andy. Ride safe and have a great day.

[@scottytroublefield205]

Do you have a video on changing the clutch pack on the road king???

[@TwoWheelRocco]

I have one on doing the clutch friction plate and steals on a super glide. The only thing that will be different is the clutch pressure plate removal tool. I'll send you the video. kzbin.info/www/bejne/rKCtioappZKnb9U. you will need the clutch hub removal tool.

[@scottytroublefield205]

I have a question please? Would the Drag Specialties Aramid Clutch Or the Barnett Clutch be better???? Road king

[@TwoWheelRocco]

Happy to help. I like Barnett clutches. . Thank you for watching and all your support Scott. Ride safe and have a great day.

[@user-6f.sd8]

Perfect my friend👌

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and all your support. Mario. Ride safe and have a great day. Road King are great motorcycles. One of my favorites.

[@scottytroublefield205]

Okay. So I followed the video and adjusted the front on cable out and adjusted the clutch inside with a half turn back out and retightened the nut and put cove back on and adjusted clutch cable to a nickel play, but it still doesn’t want to go into neutral and still wants to creep forward. Could I need to adjust cable more out? I bought this this a little bit ago, so could it be primary oil needs to be changed? He said he had that done but you never know and I thought could it be that also causing this. If I have to I will go back an readjust it all again and change the oil. 2009 RK

[@TwoWheelRocco]

How many miles on this Road King?

[@scottytroublefield205]

@@TwoWheelRocco 47000

[@TwoWheelRocco]

Sounds like your plates and steals. I'd say you steals are warped from miles. I would change the oil, but it sounds like, You should take apart and inspect. clutch hub, and steels.

[@scottytroublefield205]

Do you have an email? I like to send pictures of my old clutch to see what you think about them. However I did replace clutch with Barnett clutch and I replaced the Diaphragm Spring also with Barnett Spring. It shifts great now almost falls into gear and I can get neutral and it has quicker response. No more creeping forward lol.

[@TwoWheelRocco]

So how's your Clutch operating? And what was the problem with the old Clutch? My email is E Rocco [e-mail].

[@martinstaffa3545]

Great video to the point I think I got this thanks

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and all your support Martin. Like you said you got this. Ride safe and have a great day.

[@travislohneis224]

I adjusted my clutch a few times because I didn’t like how it felt but seems like I keep getting more slack in the cable every time I adjust it

[@TwoWheelRocco]

Happy to help, double check the hub pin, then go to the middle adjuster adjusted. Where the handle has 1/8 of play between the lever and lever mount . Any questions just ask, I like to engage the lever five times and take another look. lock up everything and that should work out. Let us know how that works out. Thank you for watching and all your support Travis. Ride safe and have a great day.

[@travislohneis224]

@@TwoWheelRocco I went back readjusted it didn’t let all the slack out of the cable set it all until it seeded pumped the clutch lever it got firm then let all the slack out completely then completely restarted the clutch adjustment process….seems to be a lot better now thanks

[@TwoWheelRocco]

@@travislohneis224 Happy to hear all is well. Thank you for watching and all your support Travis. Ride safe and have a great day.

[@Bushgator]

Have a 2015 Road king is the clutch adjustment done the same way? And what manual is better to buy online? Thanks

[@TwoWheelRocco]

Your clutch adjustment will be the same. As for your manual, Ebay. www.ebay.com/itm/2015-Harley-Davidson-Road-King-FLHR-Service-Manual-On-CD/332619856090?hash=item4d71b038da:g:M2YAAOSw2ylawFDI. Let us know how this works out.

[@bigjoeshmo]

Rocco can you share a routing diagram for the clutch cable 2003 Road King FLHRI

[@TwoWheelRocco]

If you could send me an email, I'd be glad to help. I'll send pictures of mine. Hope that helps.

[@stanbell5554]

Great video, thanks

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and all your support Stan. Ride safe and have a great day.

[@-MrRichBiker1967]

Hey Rocco...hows things brother? t y for the vid. Just had HD install a new clutch assembly , with a new 1.4kw hp starter. was getting those nail bitting kick backs, sounding like the engine is destroying itself. get it back, now cant find N, when bike is running, when its off, slides right in?? call stealer. tells me i have to"brake it in"..I did a clutch adjustment just last week, and i only gave it a good 1/4-1/2 turn( like a large friction zon,elike it all the way out), changed primary fluid to Formula+(only 26 oz on softails), and i only get it, when its real hot, when im putting bike away..lol.( jugs reading 265 deg). please give me your expertise, ty, brother .Richie from Queens,ny

[@TwoWheelRocco]

Happy to help. Give it 100 miles, let the clutch seat. You should be all right. How was your old clutch when shifting into neutral.. Thank you for watching and your sub Rich. Ride safe and have a great day.

[@-MrRichBiker1967]

@@TwoWheelRocco hey brother Rocco thank you for the response, the other clutch slid right in they replaced it because they said that the teeth on the ring gear were destroyed and cracked ,from the kickbacks from the starter ,I just did another adjustment , with the lever all the way loose touching the grip a little resistance, half turn out ..1/8" at the perch,beautiful adjustment. find neutral no problem now, little hard clunking gears ..but like you said new clutch got to break it in right... thank you again ride safe enjoy.

[@jbtheboss3790]

Good evening. I have a question. I installed 18” apes on my 2014 road king non abs, I wired the bars internally with heat shrink, however my right blinker and oil light on the dash stays illuminated but when I put it in gear the oil light goes out. I also have no neutral light now. I pulled the wires back out to check for any disconnections or breaks and have found nothing. Any help is much appreciated. Thank you

[@TwoWheelRocco]

I wish I could help. Sounds like it's grounding out somewhere. When you do figure it out please let us know. Thank you for watching and your sub JB. Ride safe and have a great day. Sorry that's all I got. I know it's frustrating.

[@jbtheboss3790]

@@TwoWheelRocco I sure will. And I guess for now I will be putting it back together and just riding it how it sits. Thank you for making great informative videos as always.

[@babybugspaw7085]

As usual Rocco, another great video. Maybe you can suggest, I have a major issue, last night coming home from work (7.5 miles of lights & stop signs ) I had a hard time finding neutral when initial start up while gearing up with helmet & so forth.. and had to start it in 1st & let warm up,,,then when almost half way home I had a hard time up shifting & down shifting & the bike didn’t sound normal, when I got home I said “something isn’t right “ told my wife, when Bike (2016 Road King) is running & I have clutch pulled in, also the bike wants to start moving forward when clutch is pulled almost all the way in. I know there’s only supposed to be about an 1/8” gap on clutch cable ,,,, mine has about 1/4” gap on the cable when checking the slack. My brain is telling me something major is wrong, it doesn’t sound right & I’m able to shift gears without bike running but the “ignition run switch is on position” & I’m not pulling in the clutch handle … any recommendations would be so appreciated.. also hard to find neutral while bike is running & gears are hard to change while stopped (clutch pulled in) & engine running..

[@TwoWheelRocco]

Happy to help. adjust that cable so you have an 8th inch of free play. Let us know how that works out. Sounds like you not fully disengaging the clutch. Adjust cable. And let's see what we have. Thank you for watching and all your support. Ride safe and have a great day

[@babybugspaw7085]

@@TwoWheelRocco Thanks Rocco, I solved that problem, I can find neutral & change gears except now my clutch handle (lever) has to be almost fully out & released before clutch engages..and now my RPM’s are running different, if I were in 3rd gear for example I’d be running roughly 3000RPM’s and now that 3000RPM is putting me in 4th gear. Also, never thought about it but with just ignition on acc (not actually turned on & running) I can change gears without pulling in clutch lever,, I’ve always had to pull in clutch lever in order to change gears into neutral…. is that normal?

[@TwoWheelRocco]

@@babybugspaw7085 sounds like the clutch is getting a little worn. And it is normal with a motor not started, that you can switch gears and go into neutral. That is very normal there is no pressure on the transmission because the motor is not running it kind of acts like being in neutral or the clutch engaged. Hope that helps. Ride it and have fun.

[@babybugspaw7085]

@@TwoWheelRocco Thank you again Rocco! Thank you kindly Rocco, I thought so but never thought about it until this was happening with my bike & started changing gears while it was off,, I’m sure Harley’s extended warranty doesn’t pay for wear items,, ugh!!!

[@TwoWheelRocco]

What bike what year? How many miles?

[@dumbcat]

3:16 you did not actually explain why you were doing what you did with the nut. you turned the nut out a few. then you turned the allen key. but why? what were you accomplishing? thanks

[@TwoWheelRocco]

Happy to help. What I was doing was putting a little free play at the Clutch hub. If you don't have the proper amount of FreePlay, when these plates expand when clutch warm ups, If not you will experience premature Clutch wear if not enough reply. Thank you for watching all your support. Ride safe and have a great day. Any questions ask. I hope that helps. Ride safe and have a great day.

[@taylored.creations]

I have a 2000 road king FLHRI and I loosened the clutch cable all the way, but I can’t for the life of me get that nut on my clutch to turn loose. I even used a hole thru socket to try and get the nut on the clutch loosened up but I can’t get it to budge. Any suggestions?

[@TwoWheelRocco]

Happy to help. Use half inch ratchet and some penetrating oil. Bigger is sometimes better. Any questions just ask. Let us know how this works out. Thank you for watching and your support Ot!5. Ride safe and have a great day.

[@taylored.creations]

@@TwoWheelRocco wouldn’t the penetrating oil cause problems when mixing with the clutch oil? Also when I tried a 1/2 ratchet the bike just rolled forward. It seems to be really stuck on there!

[@TwoWheelRocco]

@@taylored.creations looks like somebody put red Loctite. And penetrating oil at such a small amount will not cause no problems. But if it's red Loctite you're gonna have to put heat on that to melt the red Loctite. Half inch ratchet with a half inch bar should do it. you can remove the C- clip and take the whole piece out. Let us know how it works out patience, you'll get it. Go look at this video I show how I remove the seat clip for the clutch hub it's very easy. Maybe you could go out that way. kzbin.info/www/bejne/mZrPg6GFgNqbl7c. Let us know what you think it'll be in the middle of the video you'll see.

[@taylored.creations]

@@TwoWheelRocco ok I’ll check it out thanks!

[@taylored.creations]

@@TwoWheelRocco once I get the clutch adjuster out, how would I go about freeing that nut? Put it in a vise with soft jaws? Please let me know. Thanks!

[@paulthomas2461]

Awesome....ty

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and all your support Paul. Ride safe and have a great day.

[@amazingearthtv8520]

i did all this after adding new cable and it still has bike creep bad . what can i check ? please any help

[@TwoWheelRocco]

Happy to Help. How does your clutch handle feel? Did this start after cable install? Thank you for watching and your Sub AMAZING EARTH. Ride Safe and have a great day.

[@scottytroublefield205]

And changing the oil and all on the road king???

[@TwoWheelRocco]

Hope this helps. kzbin.info/aero/PLsNCxwFog9bkwQHlXJy2aooKmnWKwy7Sl. any questions just ask.

[@nitroitch]

👍🏻

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching all your support nitroitch. Ride safe and have a great day.

[@fredyadones741]

Es normal que suene fuerte al colocar la primera marcha , la mía suena muy fuerte

[@TwoWheelRocco]

Happy to help. Any questions just ask. Thank you for watching and your sub Freddy. Right safe and have a great day. Let us know how it works out.

[@skymiller530]

Looked like a clutch (cable) adjustment, not a clutch adjustment.

[@TwoWheelRocco]

Happy to help. It's good to take a look at it when you do a primary oil change.. Thank you for watching and your sub.Sky. Ride safe and have a great day.