How to : Honda CBR 600RR 2013-2019 Integrated Taillight & Relay Installation

The TST Industries Integrated Taillight will complete your 2013+ 600RR, and give it that sleek and sexy look. For more info please visit: tstindustries.com/Integrated-T...
Make sure to subscribe here: bit.ly/1jq2ZrN
Follow us on Facebook here: on. 1nuTjlF
Looking for the brightest, plug-and-play integrated taillight for your 2013 - 2014 600 RR? Look no further!
Our system will enable you to make your Honda sexy and sleek by getting rid of that fender and stock light/signals assembly. The TST Industries taillight features a proprietary circuit comprised of 82 super bright LEDs, 40 of which are dedicated to the signaling circuit. The running light, brake light, and signals are very bright and noticeable. The lens, available in a choice of clear or smoked, uses hexagonal dome light diffusing elements to provide a light output that is fuller and smoother than on our competitors lights. Instead of seeing individual point lights from the LEDs the output appears more solid from edge to edge. Our lights provide a direct fit within the tail, just like the OEM unit, so the installation is a snap. The process takes about 15 minutes and it really cleans up the look of the the bike. All the wiring is plug-and-play and no splicing is necessary to connect the taillight to the stock harness. In case you want to slow down your flash rate we include a load balancing resistor kit (these will have to be spliced in using the included tap-splice connectors). As an option, you can elect to have a LED Flasher Relay included with the kit instead of the resistors. This part will simply plug in and do away with the resistors and splicing (please see option in drop down menus below). This product is sold only through our stores and a few authorized dealers. Our taillights have been praised for brightness, quality, ease of installation, and longevity around the world. Super Street Bike magazine even wrote an article about our lighting technology in their April 2012 issue. (see article in the images on the product page). We are the company that brought you the 2007-2012 CBR 600RR In-Tail Taillight, Carbon Fiber Undertail, Halo-1 signals, and many other innovative products for many sport bike types. You will not be disappointed with this product.
If you would like more info, please follow the link above. The product page has a detailed description, available options, and abundant photos of this part.

[@Eterrnal_pokefake]

I’ve just installed the taillights in a 2021 model and the color coding for the turning signal is wrong , it’s tst brown to blue and tst green to orange. Otherwise the turn signals are flipped everything else is spot on. Great video

[@DanielTojcic]

Great how to! So clear and everything is shown perfectly!! Best vids out there

[@TSTindustries]

Thank you very much. We put a lot of effort into making these videos easy to follow. It's awesome to see it come across that way.

[@Gullett38]

just got the tail light from TST with the relay. watched this video and it couldn't of helped anymore. super easy to do and looks great after all the blinkers and the fender get taken off. it's a very nice product. nice customer service also

[@TSTindustries]

Awesome. Thank you for the feedback. I am glad that the videos helped you this much.

[@tigrez7614]

Will this fit on a 2017 Honda CBR500R?

[@Hayalet-Kurt]

I want to buy this taillight for my 2013 600rr. ı am living in Turkey and how can ı deliver this light from your website ?

[@NDB-AK]

Ha, months of waiting for that fender kit vid, just did it my self. I'll shoot you guys some picture on the repsol 600rr.

[@6Foot4Honda]

What beat is that?

[@TSTindustries]

Take/Five sample

[@KM-xn5kj]

lol

[@rajesh-516]

Can someone please list all the tools(with sizes) involved here?

[@calis1k383]

Guys I need some help! Hopefully someone reads this on time.. 🙏 time 5:17 he says now you remove these 2 bolts what’s the name of the plastic the covers the side of the rear tail light? The reason I’m asking is because mine broke off and now my light is bouncing around a lil and I just noticed it’s 1 full piece so does anyone know the exact name of it? It has the black and white sticker on it

[@agarciaguero]

Hey TST, Can you have the integrated tail lights with your oem turning signals?

[@TSTindustries]

Sure, as long as you are willing to wire the signal circuits in parallel.

[@muhammadricky1962]

Awesome tail light!

[@TSTindustries]

thanks

[@muhammadricky1962]

urwell man..

[@andrewanzalone1366]

do these just blink or do the signals move with the direction your turning (like the new mustangs)??

[@knxght7365]

+Andrew Anzalone i think they just blink, the 07-12 year model integrated light does the programmable flash

[@mmcguireiphone]

If I install led tail light and change relay, do I need to swap front indicators to led too?

[@TSTindustries]

not unless you want to. the system will work just fine with OEM signals up front.

[@gunadyfaustinus8296]

Is the relay will be fit and working to cbr600rr Euro spec? Because on my Euro spec, I do have hazard light.

[@TSTindustries]

+Gunady Faustinus Our relay will only work if your bike uses a 2 pin relay for the signaling system. If it has hazard lights then it might use a 4 pin relay and we currently do not offer those. You need to locate your OEM relay and verify whether it is a 2 pin or 4 pin.

[@agoniavr]

Did you find out? I live in Italy and I'd love this kit

[@theo.c.2165]

I recently installed this taillight, however I did not purchase the relay (thinking I didn't need it) completed the installation all the lights are functional but my bike will no longer start Im really confused. is it because I haven't changed the relay?

[@TSTindustries]

The relay has nothing to do with your bike not starting. The signaling circuit is independent of your starter circuit. You may have disconnected something during your installation. Check over all the equipment that you were working around.

[@luvhcchris]

very straight forward and simple to do. does anyone know if the 03-06 bikes would follow pretty much the same steps? i know this is for the 2013.. but just asking. i cant find a good tutorial for my 03. just want to see it visually before i take a stab at it, im a total noob at hands on stuff ):

[@TSTindustries]

The 03-06 taillight installation is very similar in methodology but you will notice that the fairing removal procedure is a little different. Also, the 03-06 taillight with the angled steel brackets screws into the tail fairing, whereas on the 13+ it screws to the subtray. The relay installation on a 03-06 is something entirely different and it requires our Gen1 relay, not the Gen2 as in this video. If you go to the relay ad on our site you will see a video showing the installation procedure on the 03-06. We will try to do some more installation videos on the 03-06 but that will likely take us some time.

[@luvhcchris]

okay thanks alot guys! greatly appreciated! will order mine soon, guess it cant be too hard to install.. ill just use this video as reference. once again, thanks!

[@TSTindustries]

You're welcome.

[@emmanuelencarnacion8219]

Would this tail light work in a 2011 CBR600rr?

[@TSTindustries]

the one shown in this video will not but we do make a model specific for the 2007-2012 cbr600rr. Follow this link for info and videos of that particular unit tstindustries.com/In-Tail-Integrated-Tail-Light-CBR600RR-2007-2012.html

[@PUNKYMEFISTO]

Why am I watching this? I don't even own a fucking cbr

[@TSTindustries]

Probably because the host does such a good job of explaining how to install a really nice part ;)

[@MattEndersonOng]

would this work on the abs version too?

[@TSTindustries]

Yes it will.

[@knxght7365]

Hi guys I just got my TST stuff, including fender eliminator kit, flushmount turn signals, i ordered the relay and intergrated taillight for the 07-2012 by accident i ment to get 2013+++++, who can i contact about trading it and recieveing the difference? thanks in advance

[@knxght7365]

Yeah I got it returned & they are shipping me a the correct taillight that I meant to order, the relay worked perfect! Very satisfied with the help!

[@joerobinson9631]

Hi guys can you tell me if the relay would be in the same place on a 2018 model cb650f ? Thanks guys

[@TSTindustries]

Probably not. Go to mrcycles.com and see their parts fiche. You will be able to locate your relay on the fiche.

[@joerobinson9631]

TSTindustries thank you for your reply !

[@masetlazy]

One of my screws from my fender assembly will not come off!! I have use a power drill and it still will not come off!! Help!

[@TSTindustries]

be careful how you remove that. Some guys have reported breaking the servo case. You can use an impact gun set on the lowest setting and that may free it. Otherwise you can work from the bottom with the case on the bike, just remove the servo so you don't drill through it.

[@comsiwieza3550]

When i live in europe i need to have a License Plate Lighting so how can i light my license plate up?

[@TSTindustries]

We have a license plate light kit that is very popular with the people who purchase our fender eliminators. You can see a video we did on the installation of our license plate light kit here: kzbin.info/www/bejne/Z5qwi6FvpsmUsMU

[@tonysnyder2249]

What size socket is holding the fender?

[@TSTindustries]

10mm

[@sarvesharma]

hey... was just wondering is TST stood for anything?

[@TSTindustries]

Yea...but it's a secret ;)

[@sarvesharma]

haha.. thought so..... like XDL!

[@alanmartinez5409]

Would it flashing quickly mess my bike up in anyway?

[@TSTindustries]

alan martinez that will not harm any alectronics on the bike

[@alanmartinez5409]

TSTindustries thank you

[@TSTindustries]

You're welcome

[@Joonagoona]

Can I use on 06 cbr600rr

[@TSTindustries]

Joonagoona This tail light will not work for a 2006 but we do have an integrated tail light for you along with an installation video. tstindustries.com/Integrated-Taillight-Honda-CBR600RR-2003-2006-CBR1000RR-2004-2007.html

[@Currly747]

On your website it says cutting is required to install this, you didn't cut anything though...?

[@TSTindustries]

You must be looking at the 2007-2012 Honda CBR600RR In-Tail Taillight. For that model to fit a taillight in the tail there is a piece of subtray that needs to be trimmed off. For this 2013+ 600RR light there is no trimming involved. This one is a direct replacement for your factory light.

[@Currly747]

TSTindustries Okay awesome. The Integrated Tail Light kit on your website comes with everything needed to relocate the the license plate and have a light on it too? Also, does it blink only on the left when the left blinker is on and only on the right when the right blinker is on?

[@TSTindustries]

Mark Green The integrated taillight kit only comes with the taillight and the load balancing resistors. At the bottom of the ad you have dropdown menus where you can customize your package. You can switch out the resistors for a plu-and-play relay (the little red and grey box we installed in the video to slow down flash rate), and you can add a fender eliminator and license plate light. If you want all the parts needed to remove the fender, replace it with our license plate mount, and the integrated taillight you will need to select the appropriate dropdown menus in that ad. This way you can get a package customized to your needs on one page in one shot with savings over buying them individually. And yes, the taillight signals left only for left turn, and right only for right turn, just like in the video.

[@austinpratt8671]

Does this model have the same strobe function as the older 2007-2012 model?

[@austinpratt8671]

So does it or not?🙁😍🏎🙁

[@TSTindustries]

Austin Pratt No sir. But there is some really good news...we have something really exciting coming out soon. We just finished the circuit design for a new taillight that does have all the programmable functions. We redesigned the capsule for a more updated look and the molds are being cut right now. We are a couple months away from launch. You can stay tuned to our Facebook to get updates.

[@austinpratt8671]

A couple months😍🙁🙁 ohhhhkkkkk well will the older model work on my 2016?

[@TSTindustries]

Austin Pratt the 07-12 will not fit the 13+. You can get the current model we are offering for the 13+ and once we launch our new setup maybe we can work something out with you for a special deal.

[@austinpratt8671]

Perfect sounds good to me!

[@LaughPlayLive]

Due to laws in my province, it's technically illegal to have an integrated tail like this because the indicators are too close together. So I was thinking that I could in addition to this unit wire in additional led lights under the edge of both sides of the tail. Anyone ever do that? I fear taking on splicing wires! And don't know the best part to buy to even do it.

[@TSTindustries]

Many of our customers have done that. It is made real easy when using our RR Pod Kit ( tstindustries.com/TST-LED-Rear-Signal-Kit-Honda-03-16-CBR600RR-04-07-CBR1000RR.html ) . The setup is easy too. You plug in the harness converters, hook up the pod signals to the bullet connectors at the end of the converters, and then splice in the signaling wires from the taillight into the yellow connectors on the harness converters.

[@LaughPlayLive]

Can the low profile smoked signals you sell for the grom work on a 600rr? Cuz if so, I think you just sold me on the idea!

[@TSTindustries]

From a mechanical perspective, yes the signals you are asking about can work on this bike. From an electrical perspective, you will need the Honda 2-2 harness converters we sell. From a safety perspective, you need to consider the fact that you will be using small signal lights deep under the tail. You need to ensure your safety out there so think about that placement real carefully.

[@LaughPlayLive]

Excellent! These here right, 2-2 converter? > tstindustries.com/TST-Signal-Plug-Converters-for-Honda.html - Slight change in what I was saying above, I wouldn't be going deep undertail, alas that's also illegal here so now instead they'd be going on a fender eliminator like an R&G tidy tail, or maybe even DMP. Thanks for your responses, I wish I thought thought this before making so many individual orders with you guys, living in Canada the shipping is adding up lol.

[@dustindevorkin8906]

I fucking love you guys. Haha

[@sam01010101]

why does your product not include the dampening pad? The devil is in the detail

[@TSTindustries]

We can include it upon request. It is not included by default because everyone's bike has one that can be used. Why put more things in the landfill?

[@zeroline19]

I fking hate the looks of cbr 600rr 2013-2018. It looks like a retarded duck; short front but higher and longer rear body, srsly what the fk is that shit? It doesn't look aerodynamic and elegant at all. Even the 2006 and 2012 are better. As a Honda fan, I really hope they change the look for 2019 and later cbr 600rr model. Honda needs to take their product seriously.

[@XFile91]

Extremely overpriced.