How To Install 2013 Ford Fusion Remote Car Starter Simple Do It Yourself

[@DW-fm6yq]

This was as easy as he said it was! My son installed my remote starter in about 8 minutes, with the greatest time spent releasing the original harness! It works great! He is now going to buy one and install on his car.

[@JsAlarms]

Happy it went smooth! Have a great day

[@odst7656]

@J's Alarms hey man, does work on a 2016 ford fusion se ?

[@megatonesilva6546]

This is such a great product. My son had spent well over $700 to have a shop install a remote start system on his 2014 Ford Fusion. The shop cut wires, spliced wires, soldered wires, heat shrink wires. Added wires under the hood, center console and behind the dash. Had to buy/program an extra key + buy a module box thing for the extra key to be left in the car. The shop had his car for 3 days. I have a 2016 Ford Fusion and bought the remote start module as seen in the above video.......I installed it myself in less than 15 mins. 🧐

[@Logan45499]

Just installed it a half hour ago. Once I was able to get the OBDII port to unplug, I was done in like 3 minutes. Works great! Highly recommended 👌

[@MrKenwillis]

Did your car come with a remote start already

[@Logan45499]

@@MrKenwillis No remote start from the factory

[@MrKenwillis]

@@Logan45499 Thanks Logan, I just purchased a 2013 Ford Fusion with no remote start and I came across this and DAMN! My brain was like I need this now but I wanted to know if it was just for existing remote starts.

[@Logan45499]

@@MrKenwillis It is an awesome addition. I had a little trouble getting the OBDII unplugged

[@MrKenwillis]

@@Logan45499 Those plugs are a pain in the but. I have great patience when it comes to not wanting to break a connector. They could be costly. So does your heater come on when you remote start?

[@philphalin7788]

FOLLOW UP COMMENT...had to contact the location because I couldn't get it to work...found out I have the other model and was walked through every step (because I'm an idiot 🤦🏼‍♂️) and was able to get it to work as it should!!! You've got a customer for life...and helped me make, one soon to be, VERY HAPPY girl on Christmas morning!!! Thank you for the help!!!

[@JsAlarms]

Thank you for reaching out to our phone tech support to get this working

[@philphalin7788]

@@JsAlarms thank you for being very helpful and VERY patient with me!! If I would've read the package then I may have prevented my undue anxiety...lol! Thanks again!!

[@DJ-sc1xh]

Had mine for almost 2 months. No issues. I installed the no honk starter in my 2014 ford fusion. Thanks J's

[@JsAlarms]

Thank you

[@Tygereye007]

Great product. Easiest install ever. I wanted a great value product option and I’m more then satisfied with this product. I live in the Midwest and this just made my winter a little bit more tolerable. Thanks J

[@fingermyface]

how did you get the obd2 port off

[@JsAlarms]

Thank you!

[@Tygereye007]

gavin rulli it’s easy you just pull

[@JsAlarms]

Thank you we have A large selection of plug and play remote start for many different vehicles

[@JsAlarms]

gavin rulli He takes a number seven and number eight socket to remove the gateway adapter or do you just Gotta stick your finger pushed the clip and pull the plug

[@redman3583]

This technique worked well on my wife's car and my wife!

[@JsAlarms]

Im happy it worked!

[@joshholmes9777]

One of the best tutorials I've seen thank you really appreciate it I'll buy all my stuff from y'all

[@violetacorlatan3288]

Hi, I have the same exact car. Does the heat starts without the engine starting? Normally if the engine doesn't start the heat is just cold air. Thanks

[@CarLover1289]

This remote start just works - and it was like $80 cheaper than I could find elsewhere. Thanks for the video and the great product guys!

[@JsAlarms]

Great to hear! Happy you got the item and works well for you!

[@juangarcia931]

Got mine in the mail today and installed within 7 minutes. Read the instructions please, this video is just a guide. Thanks much and hoping to make good use of it 👍👍👍

[@JsAlarms]

Thank you for the feedback

[@xMidgetFuryx1]

will the obd 2 plug still work like normal, take readings. and possibly flashing with the 4 inch to 8 inch conversion?

[@JsAlarms]

Yes the OBD2 will work just like normal.

[@Jessemoe21]

I bought this and installed it in under 10 mins. It works on my 2013 Ford Fusion SE. Best $150 investment.

[@JsAlarms]

Thank you

[@clydehood]

Does it actually start the SE or is it like the hybrids & only turns on the instruments cluster

[@juangarcia931]

Does it actually turn the car on on gas engine or just a/c heat?

[@JoseFernandez-dy3hm]

It worked well on my 2013 Ford Fusion SE. Great product. Totally recommend it👍👌

[@JsAlarms]

Thank you!

[@bennypeters2641]

Does it turn on the motor to do that it Can warm up?

[@rickyruhlman9407]

Just received this today and it works great.

[@JsAlarms]

Great to hear!

[@0MARLBC]

I just placed my order earlier today and just saw your guys video!

[@JsAlarms]

Thank you

[@jcruzs21]

I bought this kit a long time ago for a 2013 fusion se, can you help me if it no longer wanted to turn on remotely, what is the procedure to reset it, turn it back on, I don't have warning lights on the dashboard, when I try to turn it on from the control, only the lights flash but it doesn't turn on remotely. please help

[@danielberson1763]

Based on the video, it looks like it works with just the standard key that comes with your vehicle. That being said, is it possible to program it for both keys or can you only program it for one of them?

[@10usausa]

Thank you for the tutorial. However, I live in North Dakota where it can get very cold during winters. If I order and install this product on my 2014 hybrid, will it help me warm up the engine and defrost the windshield during the winter season? Or will it only let the electric motor run? Also, I don’t like the horn is it possible I can have it without? Please let me know. Thank you.

[@jiggawampus]

I believe you can turn the horn off on locking within the car setting on the screen or within the steering wheel controls. (I think)

[@kevin.argueta]

I’m struggling so much I can’t take the wire connector off. There is a metal barrier right behind the wire connector thats not allowing me to unplug it.

[@JsAlarms]

Call our tech support for help

[@fingermyface]

did you ever get it off?

[@kevin.argueta]

gavin rulli I did. I used a flathead screwdriver to push the tab. And putting in the new one was a pain in the ass as well.

[@fingermyface]

Kevin Argueta did you push up or down on the pin? i’ve tried both ways and it’s not budging at all

[@kevin.argueta]

gavin rulli i pushed down. push down and then like use a trim remover tool or another flathead to push the whole thing out . It’ll take a couple tries

[@stewieb4840]

This worked great for about a year then just quit the box is clicking but car will not start is there a way to reset it?

[@vilaypatel3068]

I tried to install the remote starter in 2013 Fusion SE. I followed written instructions they is shipped with the package. Installation did not go through as expected. With red connector connected, my LED flashes three times red. I never see solid LED. I need help. What is customer care number?

[@jeffclark2175]

The remote start works great but it’s starting to get cold where I live and my car will only blow cold air when it’s remotely started. Once I put the key in it changes over to where I left it when turned the car off. Is there any way to get the car to blow heat when it’s running remotely? Thanks

[@JsAlarms]

You need an AC panel data update from ford, its a TSB so it should be taken care of at your dealer.

[@fingermyface]

i just simply cannot remove the obd2 cord like it’s not budging at all, i’ve tried pushing the tab and pulling and nothing is happening

[@JsAlarms]

You have to press in the locking tap and then pull harness out

[@stanimirbaharov193]

Hi. Does this apply to the 2013 Ford Fusion Energi Pugin hybrid?

[@GTAVeteranGaming]

Hey There! Got a question for you, I have a 2012 Ford Fiesta with power locks but no central locking, do you have any recommendations for adding 3rd party central locking? Thanks!

[@JsAlarms]

If you want just remote start we do sell an add on remote control since you do not have factory key less entry here: www.ebay.com/itm/113956487360

[@dogojahman9381]

Is works for ford fusion 2010 too ?

[@robbishop1146]

I installed this product quick and easy works all but the heat/ac. They do not come on when i start the car even if i shut it off with them on.

[@josueg1997]

I installed it last summer and it worked till now and just stopped working. Any ideas how to fix it

[@KevStarkOfficial]

Works great! I got the 15 one and it's going great

[@JsAlarms]

Thank you

[@Galivantin]

My 2013 Ford Fusion came with a remote start "fob", a separate remote control. My problem is, the remote starter stopped working, I changed the (button) battery time and time again and it's still not working. I wonder if I need to install a "J's Alarms" and can the other be uninstalled?. Thank you for your video. I will save your video until I hear from you, I will purchase it as long as it is compatible, that's why I would like to hear back from you first. Thanks.

[@JsAlarms]

You should be able to remove and install ours

[@fernandoribeiro3077]

I have a fusion 2014 se. it didn't work in my car, it doesn't turn on the green light and then it turns off in the second procedure

[@JsAlarms]

Please call our tech support so we can get this resolved for you

[@albertogomez1200]

Do you have a kit for a 2015 nissan rougue??

[@shaun9401]

going to purchase soon , i read the comments and see how long it will run and it goes to the last setting , i want to know what all the safety features and any other features the modules comes with.

[@JsAlarms]

This requires the vehicle key to be inserted and turn forward before vehicle will come out of park, so they can not steal you vehicle.

[@shaun9401]

J's Alarms ohh okay , cool i placed my order 2 days ago and it came in the mail today !

[@shaun9401]

so i added from forscan from remote setting on the instrument cluster and it works !

[@shaun9401]

J's Alarms how do i change the duration time on this ? instead of 15mins

[@JsAlarms]

@@shaun9401 If you woke up the gauge cluster then it should be in there

[@philphalin7788]

How do you reset it so it'll work if it doesn't work the first time. I did everything correctly but it still will not remote start. There are no lights on the dash or low fuel light. New wire harness did nothing to change my situation. This is making it VERY HARD to be a "surprise" when I'm constantly pulling panels and not having any success!! Please help!!!

[@airvista66]

Having same issue

[@philphalin7788]

@@airvista66 and I swear I did it right too. I will say...they've been more than willing to help diagnose the problem but my issue is...its a SURPRISE Christmas gift for my daughter's car and I'm having issues getting access to her car without raising any eyebrows about what I'm doing.

[@airvista66]

@@philphalin7788 lol too funny. Mines a surprise gift to my girlfriend. So far I’ve gotten it in and back out and waiting on a replacement unit. Here’s to hoping that fixes the issue!

[@JsAlarms]

Sorry for the late reply, did you guys get them working? If not call our tech support at 559-264-9111

[@francismatawaranable]

Does it work with 2016 Ford fusion s.e.?

[@brianstingu5162]

Will the remote start still work if i get a new key for my car??? My key doesn't reach very far and I would get another one but idk if it will work with the remote start?

[@JsAlarms]

If you have the key programed to the vehicle then yes it will work

[@uchoward1ify]

Hi, I had this unit for more than 2 yrs , it's a 2013 Fusion 1.6 non hybrid,works fine but is there any way you can heat to work when remote start is going ? It just blows cold air until you turn key on (takeover) ?

[@JsAlarms]

That is a ford TSB on the 2013 models that will need an update to the AC panel by ford to work.

[@cemaydin3819]

looking at buying it. I I have 2 keys . do I program both keys using the red wire being first then plugging into black one ( one at a time) then other key , or do I only have to do 1 key which covers both? thx

[@JsAlarms]

Once it is learned to the vehicle it will work on all keys.

[@deonwilliams41]

After installing will I be able to upgrade to a key fob with a dedicated remote start button?

[@JsAlarms]

No im sorry our system needs to see the lock button 3 times.

[@juliovelasquez8003]

I used that remote starter in my Ford Explorer but when I live the acc or heat on . It start but the acc or is not worcking until press the brake pedal also the parcking lights only worcking on front not the rear , I need help thanks. Do I have to resetting?

[@JsAlarms]

Please give our tech support a call

[@azaadsangha]

Hi, I have a question about this, can the engine be turned off with the key to after starting it with the key, and are their any other buttons that can be programmed to start the car or any other combination, Thanks!

[@JsAlarms]

Yes you can turn off the motor by pressing the lock button 3 times again or press the brake on the vehicle without the key in the ignition.

[@azaadsangha]

@@JsAlarms Thank you soo much, and is the button to start the motor reprogrammable? Thanks again!

[@serote4380]

purchasing one for 2016 ford fusion se.. does installing this activate the oem remote start cluster settings ?

[@JsAlarms]

No it does not, this will run for 15 minutes and then go to the last setting for heating and AC control.

[@serote4380]

J's Alarms so if i turned off heat/ac before i turn off the ignition, when i go to remote start the car it would turn on without any ac/heat correct ?

[@JsAlarms]

@@serote4380 Yes it goes to the last setting, so if it was off it should not turn on

[@shavonneable]

Will my 2013 ford fusion SE heat get hot with this remote start without the engine on?

[@JsAlarms]

Yes it will wake up the last setting that you turn the car off with. So if you leave HEAT on when you park it will turn HEAT on when you remote start it.

[@stevencarpenter2170]

Is this just for the 2013 Ford Fusion? I have a 2016 Fusion SE. Will it work on my car? Also u said it doesn’t start the car? Did I hear that correct? I live in Arizona where it gets 120 degrees in the summer. I wanted a remote start to start the car and get the AC going before I get in. Will it still turn the AC on if the car isn’t running?

[@JsAlarms]

We have one for the 2016 Fusion also here: www.ebay.com/itm/113951157935 This does turn the AC on

[@stevencarpenter2170]

Does this remote start turn on my AC when it start the car if I want it too?

[@fingermyface]

i have a 2014 fusion se with base instrument cluster and base radio, will it still work?

[@JsAlarms]

Yes it will still work.

[@vobley]

Hello! Will it work safely on my Fusion Energi plug in hybrid? I want this function especially to turn heat/AC while charging. Will it work for me?

[@JsAlarms]

Yes this should work no problem.

[@alfredopulido2691]

Does it come with the key fob u were holding in the beginning of the video?

[@JsAlarms]

No remote controls included this uses your original remotes.

[@djyiyi100]

Hi, I just bought one yesterday is there any way to turn it on without the hork?

[@JsAlarms]

Not on the 2013 model, i do apologize but this is something in the Ford software on the vehicle.

[@LarryMorales77]

Do you have any instructions on how to reset this device when you transfer it to another Fusion?

[@JsAlarms]

Unplug white and black plug, hold down black button, plug in black plug, let go of button once it flashes red.

[@roshilissasvelti1373]

Does the vehicle turns off when you open the car door to get in? I have seen some remote start kits that when you open the door to get in the car turns off and you have to turn it on again. Please let me know. Thanks

[@JsAlarms]

Not on the fords, the vehicle will stay running. If you press the brake without the key in the ignition it will turn the car off as a safety feature.

[@roshilissasvelti1373]

@@JsAlarms thanks man! I will buy one right now!

[@roshilissasvelti1373]

@@JsAlarms I bought one but I have one question now. Is there any way to change the key for a push button? That way I don't have to stick the key every time I have to go out. Thanks.

[@thetrackstar14]

is it just the hybrid model or does it work on the standard gas model

[@JsAlarms]

This works on all models gas and hybrid

[@YZY-kv8vf]

So if I mine is not a hybrid the motor will turn on with the heater or ac ?

[@JsAlarms]

Yes that is correct

[@alexpagaza3608]

am i able to still use the obd2 port for my tune? or will it not work?

[@JsAlarms]

Yes you can still use the OBd2 plug like normal.

[@Jhorton1128]

Does this crank the engine for the 2013 se model?

[@JsAlarms]

Yes this will work

[@salehbaqais7064]

A already programed Ipc to show remote start option, does this kit will work with oem remote start option? Like on/off system and climete Control?

[@JsAlarms]

Does not show AC menu,

[@Jessemoe21]

I do have one question. Can you program multiple keys?

[@JsAlarms]

Jesse James As many keys you can program to the body control module of the vehicle

[@galvanometer110]

Is there anyway you can turn the vehicle off after you’ve remote started it with remote?

[@JsAlarms]

Yes just use the same button presses to turn the vehicle off.

[@rubberducky1660]

I received this for my 2013 Ford fusion I followed all the steps on the paper it showed all the lights correctly but when I hit the lock button 3 times it does not start I can hear the module make click noise every few seconds but that's it. any advice?

[@rubberducky1660]

hood was closed doors closed and no lights on the dash indicating problems

[@JsAlarms]

Please call our tech support and we will help you

[@thebossofgold1]

Will the car turn off if it’s running in idle for a while ?

[@JsAlarms]

This will run for 15 minutes by default.

[@brockfullerton7611]

Is it programmable. Like when you remote start it will it run what the heat B was last set at?

[@JsAlarms]

Yes this will wake up what ever settings you had on last, so if AC on it will turn on AC.. ECT.

[@brockfullerton7611]

@@JsAlarms awesome. Buying it tomorrow 😬😬

[@brockfullerton7611]

@@JsAlarms I am having few issues with Consistency

[@baileyfeldewerd2542]

I got this today and I followed all instructions. Doors are all closed hood is closed no lights on dash and when I press lock 3X the dash comes on then turns off right away. After that parking lights blink and car does not start. Please help!!

[@JsAlarms]

Call tech support during business hours monday-friday 9am to 5pm CLOSED WEEKENDS

[@asherodhner9427]

Is there any chance this would work with the 6-speed manual transmission?

[@JsAlarms]

No it will not.

[@h2oskier77]

Asher -- I have a 2014, (millennial theft-proof) 6-speed manual Fusion...you can check out systems by Compustar that work with manual transmissions.

[@ilovetoreadnot]

If I don’t have the hybrid, will it actually start the motor?

[@JsAlarms]

Yes if not the hybrid it will start the motor

[@shelbiedales]

Got my remote start today and couldn’t figure out how to get the port unplugged to do my remote start

[@JsAlarms]

This video shows you how to install it. If not give us a call

[@kevintoner5209]

How long does the car stay on for before shutting off

[@JsAlarms]

15 Minutes

[@flyboy8364]

I'm confused on how the heating works without turning the actual motor on.. where does my hybrid have an electric heating unit?

[@JsAlarms]

That is a good questions for ford, we do not have much cold here so i have not tested the heat part only the A/C unit.

[@gurdittsingh5263]

Does this apply to 2013 ford fusion non hybrid?

[@JsAlarms]

Yes same install on the non hybrid as the hybrid

[@82danielj]

Does this turn on heated seats?

[@JsAlarms]

No it does not

[@chrilus8224]

can i install it in my fusion 2013 1.6 turbo?

[@JsAlarms]

Yes this will work

[@uniteparkour]

Will this work on my 2.0l eco boost?

[@JsAlarms]

Yes it will

[@DavidHeser]

My wife has a 2013 fusion hybrid. Tried navigating your site, but not sure how to view the products. Clicked on “shop” then “remote start”. No products showed so I search “Ford Fusion”.... nothing... then tried just “fusion” and “ford”. Anyways. Want pricing on that exact remote start in this video. As a first time buyer from your company, I would prefer to use a website vs giving my card info over the phone.

[@JsAlarms]

www.ebay.com/itm/123951083406

[@DavidHeser]

Bought it! Thank you!

[@oday.M43]

Hi Work perfect but after I change battery for car The remote now doesn’t work How I can fix that

[@JsAlarms]

Cycle the key on and off 5 times, module will flash red twice if done correctly. It will now work.

[@oday.M43]

Work perfect Many thanks

[@gurveersingh2135]

What is the working range of this remote starter

[@JsAlarms]

This uses your original remote control, so the same range you have now for lock and unlock

[@gurveersingh2135]

@@JsAlarms is it ok to use it because it might effect the battery power or may low the battery if malfunctioned

[@bee1935]

Will this work for a 2012 Ford Fusion?

[@JsAlarms]

Here is the one for the 2012 ford fusion www.ebay.com/itm/114049416571

[@DragosDoana]

Hi, for Mondeo mk5 Powersift work ? Model europe ?

[@JsAlarms]

We have shipped to UK before. Should work

[@DragosDoana]

@@JsAlarmstheoretic should......but no

[@patkelly4257]

will this hurt your cars battery

[@JsAlarms]

No this will not

[@574Quon]

Will it work for 2012

[@JsAlarms]

No im sorry this will not.

[@bongoflavor5230]

Where can I buy this module at

[@JsAlarms]

www.ebay.com/itm/111580580984

[@brockfullerton7611]

Work for 2013 SE 2.5?

[@moeenkhawaja9460]

Yeah, same question

[@JsAlarms]

Yes it will work

[@brockfullerton7611]

@@JsAlarms is there a warranty of any sort

[@brockfullerton7611]

@@JsAlarms when it starts will it auto start at the last climate it was at

[@mackenziebowersock5527]

How far does this reach?

[@JsAlarms]

Same distance you have now for lock and unlock

[@robertdrayfahl6632]

Made it to the last step. It turns solid red, flashes green rapidly, then continuously flashes red slowly. Remote start not working

[@JsAlarms]

Sounds like your vehicle is a 2014 and not a 2013, give our tech support a call.

[@DaSik01]

I see that there is also a model that says "No horn honk"? What's the different remote start combination for this model?

[@JsAlarms]

For a no honk it is Lock, Unlock, Lock

[@gordonlim2322]

READ THIS BEFORE PURCHASE! TLDR: product works, rude and unhelpful technical support, might take an hour Hello fellow Fusion owner. I am writing this review because I struggled to install the remote start in this video and would like to caution future buyers so they'll know what they might be getting into. My order arrived Nov 20 and I finally got it installed on Dec 8 after a bunch of research and purchasing the right tools. *PART 1: Rude and unhelpful technical support* I was not able to remove the obd plug as easy as it looked in the video. The back of my plug was blocked by a metal frame. The video only showed him reaching into the back and plugging it out but doesn't show what's going on in the back. I called technical support and the first thing he told me was to watch the video which I already had (and over 10 times). Past that, he made no effort to help diagnose my issue. He said that hundreds of people have done it with no issue and I should ask someone else (which I also did and they weren't able to do it either). He was not prepared to actually help me out. I finally suggested if he would let me send over a picture (which if he had really wanted to help I'd imagine he'd be the one suggesting that). Keep in mind this was all while carrying a rude tone. And when I got a reply on the picture I sent it was not helpful either. They told me to remove a screw that even in the picture was clearly blocked by something else (which I later figured was the knee airbag). *PART 2: How I figured out how to do it* I watched another video that was also to install a remote start (from another company) and they suggested to remove the obd port (a.k.a gateway module). The issue was that the 7mm was covered by the knee airbag. I read the manual to remove the driver-side knee air bag which required a 10mm ratchet wrench (the area is too tight for a regular wrench), a T20 screw for the panel below the steering wheel. Then only are you able to pop down the gateway module to easily unplug the obd. Everything else became as straightforward as the video once I was able to do that. In conclusion, if you are buying this with the impression that you will only need 5 minutes and no tools to install, I recommend you first check if you can unplug the obd plug as easily as in the video before you purchase. If you are not able to, it means you might need to do the same procedure to drop down the gateway module which will involve removing the knee air bag which will take up to an hour and requires tools. On a side note, after I sent a message with the picture to ask for help on the seller's page. My ebay account got permanently suspended. I created my account for the sole purpose of this remote start so something tells me the seller went out of their way to have me suspended just so they won't have to actually help me out or give me a chance to leave a legitimate negative review. But end of the day, I don't have a way of confirming this theory so I'll leave it up to interpretation. But anyways, the product works. And I feel accomplished having been able to figure it out myself. I did a ton of research to figure out what was going on down there and also tried a bunch of tools so I'm happy that paid off.

[@Mr.Towboater87]

I did everything on the paper and still not working tried 4 times contacting technical support in the morning

[@JsAlarms]

Have you contacted our tech support, we can get it working over the phone

[@Mr.Towboater87]

@@JsAlarms yup all good!! Got it working thanks!

[@baileyfeldewerd2542]

@@Mr.Towboater87 what did they tell you?

[@Mr.Towboater87]

@@baileyfeldewerd2542 I had it set up right but the module they sent was set up for lock, unlock, lock. ( no horn hunk) The one I thought I ordered was the lock 3 times with horn hunk.

[@01Hayk]

It doesn’t work. after I’ve plugged in black plug. it started flashing red light,then blinked car’s lights and slowly flashing red light.

[@JsAlarms]

Give our tech support a call and we will help you

[@shirmooge]

But my it start for sec then it go off

[@JsAlarms]

Sounds like it is not programmed correctly. Call us for more help

[@preetdhillon764]

Nice

[@JsAlarms]

Thanks

[@boatymcboatface2994]

Mine has stopped working. Marker lights flash but it wont try to start. Any ideas?

[@JsAlarms]

Sounds like you might have a warning light on the dash such as check engine light, low fuel, low tire pressure?

[@brockfullerton7611]

This doesn’t even start my car beside 1/10 times trying….

[@JsAlarms]

Sounds like not installed correctly please reach out to us

[@fecklarjenkins2549]

On ur 2012 fusion kits do u have to have 2 keys

[@jamezh2822]

Cab the remote starter be setup as a lock unlock lock unit or does it take a different module for No Honk starting?

[@JsAlarms]

Not on the 2013 model fusion, but all other vehicles and years it can

[@chrilus8224]

Its will work with the remote battwry is low? Because mine only start sometimes

[@JsAlarms]

Yes this will

[@DavidRuiz-yq5yr]

does work an a 2012 ford fusion to ? is it the same install instructions ?

[@JsAlarms]

No but we do have one for your vehicle here: www.ebay.com/itm/114049416571

[@Rennisha]

Sill this work for the 2017?