How to Install 6” Lift Kit Rough Country 2020 RAM 1500 Install in your Driveway no Lift! Easy

Rough Country 6in Lift kit 2019-2022 Ram : amzn.to/41efdkk
#roughcountry #roughcountrylift #ram suspension lift ‪@RoughCountryTV‬
6in Lift Kit Ram 2020 1500 Install in my Driveway Rough Country! Easy?
DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results, some of the projects could be dangerous if not done properly. Andy the X tech

[@AndyTheXTech]

Lift kit used in the video amzn.to/43EVZWK DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I will receive a small commission. This helps support this channel and allows me to continue to make videos like this. Thank you for your support!

[@cjbarlow61]

Installing the 4" kit under my 2017 now. I have to get a spring compressor tomorrow. The videos are far better than the actual RC instructions

[@AutoFixYT]

Wow, this was an amazing video!! I watched the whole thing and I don't even own a Ram, neither do I have any interest in a lift kit for my truck. But it held my full attention the whole time! Having done big projects like this I know how much effort it takes to film it all step by step, and specially to edit it in such a way that it keeps things interesting. Very well done! And I love that you showed that it's totally doable with regular tools in the driveway! (except for the front struts) I also liked that this lift kit provided literally EVERYTHING you need for this. There were several moments where I thought "oh great, now what?" and then boom you pulled out the provided brackets and hardware. Perfect! Also, I like the fact that the RC Lift Kit brings all the bushings for all the arms back to stock pretty much. So the front arms and the rear trailing arms aren't under extra tension like they were with the leveling kit. Much better long-term! Awesome job overall! Well done! I'm actually curious to see some pictures of the truck with the big tires and all! Oh and I just now noticed, you're wearing a New England Drone Tours shirt in the voice over haha, nice touch ;)

[@AndyTheXTech]

Awesome! Thank you! Yes it was so much to edit this vide. I think it took longer than the actual job. It looks and rides great now. I will do an updated video with the bigger 37” tires. 😁👍

[@Jasons5.7]

serious shout out would not have got this done without this guy. He goes in depth and shows himself doing it all unlike a lot of other videos. Props man🙌

[@RenegadesGarage]

Andy The X Tech.. Definitely a job worth doing. I want to lift my 2020 Ram. Thanks for sharing the install with us.

[@AndyTheXTech]

Your welcome! I’m surprised how well the truck rides after. Great kit! 👍

[@michaelmuise4980]

Love love love it!

[@AndyTheXTech]

Awesome!!! Thanks Dude!

[@RickySlatton]

Nice! I have the 4 inch RC lift on my ram 1500 and love it. No issues.

[@AndyTheXTech]

Yes they make a great kit. I’m happy with the way it came out.

[@rtownsend744brad]

This is Ryan, the X Tech and i concur on these strategies. Probably another great tech this crap industry has lost.

[@AndyTheXTech]

Hi Ryan. Yes 👍

[@brianglynn1543]

Awesome video !! Very well done !!!

[@AndyTheXTech]

Thank you! It took a long time but I had fun doing it. 👍

[@mannyfresh8504]

Bro…. Needed to see this for motivation 😂. Thanks. Learned some tips here. My future goal is 3.5 but you did a 6”… i was unsure if this was doable in a driveway.

[@AndyTheXTech]

Awesome! Ya it wasn’t to bad. It rides great after. 😁👍

[@DerbyBandit]

Was look into getting a 2020 Big Horn and was just checking to see how they look lifted and came across this video…watched it all and don’t even have the truck yet 🤣 but dammmm sick ass work bro! Truck looks solid!!! Great work, new subscriber now! 😎

[@AndyTheXTech]

Awesome! Thank you! This was a lot of work but I’m enjoyed it. Overall not too hard just a lot. the truck looks and rides great after. I’m impressed with this kit they did a good job. 👍

[@edgarlara2059]

Awesome work

[@AndyTheXTech]

Thank you! 👍

[@sheerwillsurvival2064]

Rough country makes a descendant lift kit . I put one on my 2013 grand Cherokee works great and it was cheaper then replacing front struts as it came with front struts and rear coils and shocks 👍🏻👊🏻

[@AndyTheXTech]

Yes I’m impressed with it. Lots to install but well built and the truck rides great.

[@kevinschweiger883]

I know this is a late comment but is the 2wd lift kit a little easier to put on due to not having CV joints?

[@Redeyereaper8]

How long did it take?I'm getting ready to do mine 20 ram 1500 4x4 big horn....rough country 6 inch with front coil over assembly and progressive rear springs...also front upper control arms....wheels atr anthem rogue 20x12 -44 nitto recon grapplers 35 13.50 20.

[@AndyTheXTech]

I would say it took me about three weeks. That’s only doing it for about an 1-2 hours a night. And I did it all myself no helpers plus filming so that slows it down a little. I would think if you had three or four helpers you could probably do it in about 2 days. obviously depends how fast you’re working.

[@jesuslver15]

Stock uppers? I did the same 6 inch on my 2011 and im having positive camber issues, cant get it to zer0 out but i have aftermarket uppers for a 2 to 4 inch lift wondering if thats where i went wrong?

[@AndyTheXTech]

It could be. That’s good to know. This one needs upper ball joints now. We were thinking of using those control arms. Probably just go with stock ones.

[@frankkaczmarczyk8281]

How did the 37's fit? Any trimming? What size and backspace wheels did you use?

[@AndyTheXTech]

They still rubbed a little. Had to bend some or trim a little. But over all they were good. The truck rides great and looks awesome. 👍

[@user-vt7sp6pp4p]

Im having trouble getting my cv axles fully seated into the diff, any tips?

[@chickenfixn4439]

Put some grease around the c clip and center the c clip as best you can. The grease will hold it. Slide it in and give it a shove and it should go in. If not take a rubber mallot and tap it in and itll go

[@gerryortiz7276]

So I’m assuming it’s not a big deal if the lift doesn’t sit at the same height going laterally across

[@AndyTheXTech]

Not really. It’s minimal. Truck looks great and rides amazing.

[@armandomoreno1955]

What were your starting measurements before the lift?

[@AndyTheXTech]

It’s in the video.

[@armandomoreno1955]

@@AndyTheXTech Thanks. not sure how I missed that.

[@danny42342]

Can I use this on a 2022 rebel ???

[@AndyTheXTech]

You will have to check with Rough County

[@user-vt7sp6pp4p]

How long did it take you?

[@AndyTheXTech]

Actual was a couple weeks. Only working on it about an hour or two a night. I would guess total about 20-25 hours. But also I was filming it. so set up, moving around and talking took up some time.

[@outdoorforlife7018]

Are those 33 in tires

[@AndyTheXTech]

It started with a 3in leveling kit and 35in tires. After the 6in lift kit we put 37in tires on. They rubbed a little. had to make some slight modifications.

[@AndyTheXTech]

I mean 2in leveling kit

[@johnnygoins6078]

This must be a 4 wheel drive

[@AndyTheXTech]

Yes

[@Steemoney]

Wana do mine 😂

[@AndyTheXTech]

It’s so much fun now