How to install a back up camera into a 2009 dodge caliber

[@krystals.6508]

This has been super helpful with my 2010 caliber. Thank you for making this

[@loozeone8249]

@Angler Andy the reverse wire from radio is just the radio harness 09 caliber didn come with option for reverse camera thats aftermarket. He ran the aftermarket radios reverse wire(remote wire to activate camera and radio screen) to the back tailights and tapped into reverse light. So u have 3 wires ran from radio>1camera feed> 2positive for cameras power> 3remote wire positive> tapped into reverse light.

[@h8h81]

Figured this out. Thank you though.

[@karangill151]

I appreciate u brother

[@Vincent_Preston]

Imma probably buy an Alpine and camera and install it as a summer job.

[@kiki56]

Hello can you tell me how did you connect the cable of the antenna of the car radio

[@djkeviekevbx]

Good afternoon. I would like to know and see how you ran all the wires to power the camera and back to the head unit

[@kiki56]

Bonjour pouvez me dire comment avez-vous fait pour brancher le câble de l'antenne de l'autoradio ?

[@johnlewis9340]

Where you get all the stereo installation parts like the radio, interface, install kit, and wiring harness

[@abelscaliber7969]

Amazon

[@anglerandy5736]

If I already tapped into the head unit reverse signal why is there another red wire... to power the camera? That's so stupid they could have made it all one connection at the head unit.

[@anglerandy5736]

Why did you connect so many wires for positive in the back it's one positive wire.

[@loozeone8249]

@Angler Andy the reverse wire from radio is just the radio harness 09 caliber didn come with option for reverse camera thats aftermarket. He ran the aftermarket radios reverse wire(remote wire to activate camera and radio screen) to the back tailights and tapped into reverse light. So u have 3 wires ran from radio>1camera feed> 2positive for cameras power> 3remote wire positive> tapped into reverse light. Then the ground of course.