I love Jason's idea about leaving 3 or 4 tabs to screw in. Then tape or mask.
@warbird1012103 жыл бұрын
Not mei hate that....always 1 up 1 down ....but u shouldn't use a 90 takeoff....use a top or a side takeoff ...
@rhiczgartv34103 жыл бұрын
Good job bro,same my work in philipines🥰
@MrMLaidlaw5 жыл бұрын
I recommend cutting a smaller hole first and it will be easier to cut the marked out hole. I use a sheet metal screw to penetrate the duct then pry open with reds to cut out centre then cut the marked out line. To mark out the hole for round universal take-off as shown in the video you can use one size up of a 90' and just cut within the line to get a good fit everytime. Remember cutting less is better than cutting too much or else you gotta pop up about four of the tabs so you can secure to duct with screws then use Tin tape or duct sealer/ Larger gaps may require both.
@AnthonyHoekstra5 жыл бұрын
MrMLaidlaw thank you for your feedback in your comment. Yes there are different ways of doing this. I will show different techniques in future videos.
@tasmaniandevil76102 жыл бұрын
How many feet should flex line run or not be longer
@remiaubin66197 жыл бұрын
Turning your camera right side-up might help with your YT Thumbs Up count.. lol. Otherwise, can still see video. Thought I had to buy a Malco hole maker but the screwdriver/snips method works too. Thanks
@AnthonyHoekstra5 жыл бұрын
Remi Aubin thank you for your suggestions in your comment. I'll take them under advisement when making future videos. I did video it right side up. When I edit it later I turned the video sideways to fill the whole screen. So I would not have black gap spaces on the sides.
@rashadgreen28706 жыл бұрын
I liked this video to show everybody that its nothing like they make it on TV.
@AnthonyHoekstra5 жыл бұрын
Rashad Green Thank you for taking the time to comment. It's much appreciated. Your suggestion will be considered for future videos.
@scriptum94596 жыл бұрын
Que modelo de tijera usaron para cortar ??
@warbird1012103 жыл бұрын
Must be a plumber cutting...hehehe
@marcopolotrail7 жыл бұрын
Would it ever be advisable to install an elbow actually inside the duct towards the air flow to "catch" more heat ?
@AnthonyHoekstra5 жыл бұрын
Marc Desrosiers Thank you for your question in your comment. No it would not be advisable to install any type of fitting inside the duct. The system works on positive pressure. If your system is designed and built correctly the cfm is enough to deliver the correct amount of conditioned air throughout the conditioned space.
@albertomartin706 жыл бұрын
R.I.P. those with headphones (intro power)
@AnthonyHoekstra5 жыл бұрын
Alberto Martin thank you for taking the time to give me feed back in your comment. I agree. I was playing with the editing on this video before posting. It was one of my first videos I posted before getting better editing software.
@son_of_guns4 жыл бұрын
And bend a few tabs out to put a few zip screws in
@shabbirhussain76346 жыл бұрын
Thanks u so much for this vedio
@mshelton266 жыл бұрын
Shabbir Hussa
@AnthonyHoekstra5 жыл бұрын
Shabbir Hussain Thank you for your positive comment. It's much appreciated.
@boashna5 жыл бұрын
bravo
@son_of_guns4 жыл бұрын
Wth he had to use two hands, just so much wron here, could of cut 15 holes by now
@GreenLifeOmaha_GLO6 жыл бұрын
Why not just use a hole saw?
@benjamintimmins16565 жыл бұрын
Green Life Omaha #GLO cause that costs a lot of money and it's only one size...use some malco or dewalt shear attachments. Much easier than using tin snips
@AnthonyHoekstra5 жыл бұрын
Green Life Omaha #GLO thank you for your question in your comment. There are many ways of doing this. This is just one. Move videos in the future will demonstrate different techniques. Thankyou
@warbird1012103 жыл бұрын
Snips are the safest and fastest if u know how 2 use them...hole saw can create metal shardes that can blind u even with saftey glasses...i coulda cut 20 holes be4 this guy in video did 1.....all with snips...
@hrnslarainstalacciones53616 жыл бұрын
Caladora cortar metal
@mushroomcastle51845 жыл бұрын
There a tool for this. . . It's supposed to be a 5 sec job. . Bro
@AnthonyHoekstra5 жыл бұрын
Mushroom Castle thank you for commenting. Yes your right. There are other ways of doing this and this is just one basic way. I'll make other videos that will show different techniques of doing the same job.