How to install a Log Burner into a Shed / summerhouse

This is how i fitted my little logburner into my shed/ mancave on my allotment safely.

[@JonathanCook1975]

Great video and the log burner looks spot on 😀👍

[@heritagewindowsnorfolk]

Great work. Cool little set up 👍

[@lesleyhoworth9598]

And yes I did enjoy your video, bit of singing thrown in excellent

[@terrykingsallotmentgardening]

Nice little Burner my friend. 😁Happy Gardening........🍅Terry King 🥕

[@CookiesAllotmentDevon]

Thanks terry, I can’t wait to go down there when the snow is on the ground, light it and sit there with a hot chocolate! Thanks for watching.

[@terrykingsallotmentgardening]

@@CookiesAllotmentDevon 👍

[@theonearmedpoolhustler3116]

I fitted my own too. Thanks for sharing.

[@kevinhancock4064]

I'm thinking if doing thus also for doing wirk in my shed seems many are doing it

[@davidholmes2665]

Ok cheers look forward to seeing it

[@sommerbarkes4643]

Great video,full of information!

[@excemptfrombs2124]

Good video ,i think u will eventually source a bigger burner ,I purchased a outback wood burner with double shelved oven on the side for cooking at my allotment,I purchased a quite good quality one with one eye on all the countries without power,I purposely brought portable in case I need to bring home threw the “dark winter” we have been promised,let’s hope it never has to leave my allotment

[@CookiesAllotmentDevon]

Thanks for watching, im actually thinking of extending the shed, adding a other room, if i do then ill prob upgrade the burner.

[@theinternet8853]

Hi where did you get the flashing bung? Is it a normal pipe 1 or a high temp 1. Do you have a link please 🙏

[@MuddyBootz]

A nice job...just in time for winter 👍🏻

[@CookiesAllotmentDevon]

Thanks, it works a treat. Is there any chance you could share it on your channel? That would be really helpful for me to get my channel out there . Thanks for watching,

[@stevenclark6910]

" The heat is... OOww ..Special" lol.. love it, how big is your shed?

[@CookiesAllotmentDevon]

Hi m8, where the flue is it’s 2 metres. 3-4 metres of flue? If you aren’t confident then speak to someone, also when u buy a co alarm but one that has the background level display, as being exposed to low levels on a daily basis is just as bad as a high dose, as it builds up.

[@nickbarnett1942]

Noticed you’ve got weeds growing through your floor 😂😂😂

[@martinfrance9133]

hi bud based in devon where did you get the plate for the roof from cheers martin

[@deano3729]

Better roofer than a greenie 🤣

[@CookiesAllotmentDevon]

Hahahaha…shipwreck

[@777daf]

Good job very informative 🤙

[@CookiesAllotmentDevon]

Thank you , I’m going to do a little follow up video now it’s a few months on.

[@sassythesasquatch1571]

I'm gonna do the same , just struggling with what heat resistant insulation I need n I'm good to go

[@DrRock2009]

Might want to trim the tree branches back a bit? 🤷‍♂️

[@keithbiggerstaff6341]

Great video, did you cut the felt away under the silver square on the roof or just put it on and seal it?

[@CookiesAllotmentDevon]

Keith Biggerstaff hi ken, thanks for watching, I left the felt there. It is screwed as well. Are you fitting one?

[@Perjury7times]

Did see what seal you used on roof

[@CookiesAllotmentDevon]

Ct1 its called the snag list eliminator

[@davidholmes2665]

Hello mate I'm hoping you can give me some information on your little log burner I've got a 16ft x 12ft shed i want to install a small possible home made woodburner but I'm being given all sorts of horror story advice in particular about distancing from combustibles ie shed walls and roof but after watching your video it all looks fairly simple i like your stove itself was that home made also how big is your shed many thanks dave

[@CookiesAllotmentDevon]

Hi dave, if you look on the internet you can find out distances from combustible/ non combustible surfaces, the only tip i would give is when u get a co alarm buy one with a display that shows you the background co levels, as lots of small doses can be as bad as a large dose. And never leave it unattended

[@davidholmes2665]

Hello mate wondered if you could supply some information on the stove like dimensions and so on also the size of your shed and how well it heats it also how long it burns for when filled up and the draft shut down look forward to hearing from you dave

[@CookiesAllotmentDevon]

Hi david, im going to be doing a follow up video now its a few years on, so if youve subscribed, set your alerts and youll get a ping when i upload it.

[@arnietwo11]

Thanx for the info and entertainment. If ur twin wall flue was 7", what size of hole in the roof is required ? Is it 30mm extra all around or what ??

[@CookiesAllotmentDevon]

I did it roughly about that, i think i used some of the 500’ sealant around the edge of the hole.

[@dl3661]

Hi there, what pipe tubing did you use to come directly from the back of the log burner please? Don't suppose you have a link to where I could buy some please? I have a really old stove from a locomotive and the external diameter of the flue is approximately 3.5 " thank you

[@paulrichards4913]

how high is your shed, doing mine but its 2.5m cant seem to figure out the bits i need the fire is 5 inches.

[@traceypotts9425]

What sealer did you use on the roof m8

[@CookiesAllotmentDevon]

For the aluminium to the shed roof a product, called CT1 in clear. It’s about £11 a tube but it’s brilliant.

[@gordonbrown1017]

Where did you get the grommet for the roof seal impressive

[@CookiesAllotmentDevon]

Hi Gordon, I purchased the part you mentioned off eBay. It’s silicon based and I believe heat resist ant to around 300+ degrees

[@gordonbrown1017]

Thanks

[@stoneycut]

Can any1 tell me what's the best boards to use for fire???

[@CookiesAllotmentDevon]

Cement boards, if you speak to a specilist they will reccommed some and where to get them from.

[@stoneycut]

@Cookies Allotment Devon av seen the hardiebacker boards don't know if any has used them dont want to burn me man cave down

[@1nayls]

@@stoneycut I have just installed hardiebacker boards in my man cave, I battened out the ply walls, then hardiebacker with a 25mm gap at the bottom, then tiled.

[@stepheneurosailor1623]

👍🍺

[@davidholmes2665]

Was your stove homemade

[@CookiesAllotmentDevon]

No, i bought it second hand. Ill do a video on it in a few days , an update with it being lit etc. check back after the weekend

[@puremontana5010]

Not a fan of that stove design. Open the lid to add wood and fill the shed with smoke!! 🤦‍♂️

[@ashwright4770]

Use the bottom loader only when using indoors maybe. Smoke probably will leak from that hinged lid though

[@shaun2049]

Sheds gonna fall down mate need a new one

[@shantahsieh2877]

Mine works too. I used the Stodoys plans and performed it without any problems.

[@MrNupit]

what an absolute mess! terrible ! a fire just waiting to happen conforms to no fire doc J regs or TN 23 TN 24 regs

[@CookiesAllotmentDevon]

Cheers for your input, the winter nights at yours must fly by. 🫡