How To Install A Suspension Lift Kit In A D40 Navara

  Рет қаралды 11,972

j01HUNTER

j01HUNTER

Күн бұрын

Пікірлер: 11
@mafosa8519
@mafosa8519 Жыл бұрын
I feel your pain brother!! Thanks for the share! “Cheers from Dallas TX!”
@rich990
@rich990 Жыл бұрын
Great vid mate and reinforces that when I get my D40 lifted I'm paying someone else to do it 😂🤙
@j01HUNTER
@j01HUNTER Жыл бұрын
Hahah I do not blame you
@nathandaly8806
@nathandaly8806 Жыл бұрын
Awesome video thanks heaps for the info An come tax time I’ll be thinking about lifting my D40
@hadihusseen1043
@hadihusseen1043 Жыл бұрын
is the bilstein Suspension good for nissan pathfinder 2011?
@jeremywayne6361
@jeremywayne6361 Жыл бұрын
Okay, mate. We have some issues here. For reference, I run a business almost exclusively installing lift kits and 4WD accessories. I can assure you that at 28.04, it is absolutely the assembler's fault. I've fitted heaps of pre-assembled lift shocks that fit perfectly the first time. To further add to the issue, I suspect your strut top hat bolt was installed incorrectly as well-specifically, not tight enough. I believe this for two reasons. Firstly, you can see that there is essentially no thread coming out of the top of the nut; there should always be at least a small amount of thread (I've built hundreds). Secondly, at 27.38, you can hear the dust boot hit the bottom strut top washer, creating an audible "clink" sound. The sound test is something I perform on every strut I build. If everything is correctly assembled, I should be able to tap it all over the strut and never make it produce that "clink" sound. Think about it; every single bump you go over will make that strut rattle. In conclusion, mate, it is the assembler's fault, and I hope they covered the cost of you getting them installed. Cheers, mate
@j01HUNTER
@j01HUNTER Жыл бұрын
Yea they did thanks for your information very informative the struts were assembled by a young lad who looked like he just woke up so I o my had to pay for the wheel alignment didn't get charged for the front strut install.
@danielking4793
@danielking4793 Жыл бұрын
What’s the Bilstein part number on those extended shocks ?
@j01HUNTER
@j01HUNTER Жыл бұрын
Front Bilstein B6 4x4 Shock Absorbers
@troymeredith9528
@troymeredith9528 8 ай бұрын
What are your Falken tyres like .anygood.
@j01HUNTER
@j01HUNTER 8 ай бұрын
Brilliant won't go any other brand good in sand rocks and Rd not loud on the highway and they wear very well.
HOW TO Install a Lift Kit on a Jeep Wrangler JL for Beginners
1:19:38
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
Is THIS The BEST NP300 Nissan Navara Lift Kit?
11:09
Fulcrum Suspensions
Рет қаралды 1,5 М.
Show and Tell - Nathan's D40 Nissan Navara
9:57
Trailblazer
Рет қаралды 1,7 М.
D40 NAVARA LIFT KIT INSTALL + 265/70/17 MUD TYRES
11:31
Mike Lake
Рет қаралды 125 М.
Add-a-leaf Kit VS Rear Lift Block: Rear Lift Kits
8:13
Rear Wheel Performance
Рет қаралды 132 М.
The DOs and DON’Ts When Installing Polyurethane Suspension Bushings
6:52
Pathfinder Lift Kit - #SHEDLIFE
8:40
TJ AND MAC
Рет қаралды 175 М.
Modified Nissan Navara D40, modified episode 10
16:24
Ronny Dahl
Рет қаралды 384 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41