How to Install a Tyger Roll Up Tonneau Bed Cover for a 2018 F-150

[@spearius9059]

Literally, excellent video. The little detail of showing how close you installed it away from the cabin is all I needed to figure out why mine wasn't rolling out all the way. Thank you.

[@TheToughGuysTV]

Thank you for the feedback! So glad the video helped out!

[@Goodfella1960]

Received my cover today. Got home at 6:00, and thanks to you, I had it completely installed by 6:30. I never even looked at the instructions. Works great, and looks fantastic. Thank You!

[@TheToughGuysTV]

So awesome Carlo!! I’m glad the video helped out, and that your install went well! Thank you for taking the time to let me know and for watching! 💪🏻

[@meganbennett2144]

Appreciate this video so much! And your kiddo is adorable. I have a 2017 F150 Fx4 with a 6.5 ft bed. Making a cross country move from TX back to my home state of WI, and want to protect whatever I put in my bed from the unpredictable fall weather during the drive. You made installation seem much less daunting than I made it out to be in my head 😁 Will definitely refer to your video for install when the cover arrives this weekend. Thanks again!!

[@randyrasner5261]

Probably just about the best and most thorough how to videos I have ever seen. Well done!

[@TheToughGuysTV]

Hey! Thank you for that feedback! I definitely try my best to deliver good information. Thank you for watching!

[@mathewcooke5294]

It’s video is still helping people out! Didn’t even need the instructions and had it done in about 15 minutes. Thanks!

[@4packers]

Excellent video. I just installed my Tyger roll up in about 15 minutes without taking the directions out of the bag. Good looking cover with a tight fit.

[@johnmikonczyk3781]

I just finished installing the same cover on my 2020 F150, and watched a few of these just to make sure I got it right. This one was the best of all of them, made it a piece of cake.

[@TheToughGuysTV]

Thanks for the comment! Glad the video helped out, this was a solid cover for us, wish I had the same one on my new truck - it came with a different type that’s pretty terrible. Thanks for watching and for sharing your thoughts! 🙏🏻

[@Goodfella1960]

Best instructional video on this that I've seen. Kid is adorable. Great dad.

[@TheToughGuysTV]

Thank you Carlo!! 💪🏻 I appreciate it and thanks for watching!

[@janed.1475]

Thank you for this video! I got this cover for my Nissan Titan XD and your instructions were very thorough and spot-on! After watching your video, I didn't really need the instruction guide and installed it in under 30 minutes. Thanks again, from a Tough Chick to the Tough Guys!

[@TheToughGuysTV]

Hey thanks for the comment!! Glad the video was able to help you out and glad it was good enough you didn't need the instructions!! It's a solid cover too, great purchase! I appreciate your support very much!

[@ShadracFrost]

Thank you for making an articulate and very well spoken video. Much better than the manufacturer !

[@TheToughGuysTV]

Thanks for the comment and for checking out the video!

[@angryman71]

I have to say.... GREAT VIDEO! IF you are not a teacher, you should be. You did a fantastic job of detailed (narration and camera usage) to show every step exactly. Thanks for the info, and again, great job! :-)

[@TheToughGuysTV]

Thanks so much for the comment, really makes me feel great! Glad the video brought you some value!

[@80sborn35]

Just got mine in yesterday and was thinking of having someone do it for me. After watching this I got this!!. Appreciate the great play by play brother, Well Done!!

[@TheToughGuysTV]

Thanks so much for the comment!! Glad the video was able to help you out on the install - it was a fun one to make! Hope it holds up for you as mine did - Thanks again

[@cherylthompson8048]

Nice job! And I like your little helper. What a great kid! Appreciate the clear instruction.

[@TheToughGuysTV]

Thanks so much! Glad the video helped you out! 👍🏻

[@noemiebergeron3451]

Thanks ! We installed successfully today because of your video ! Awesome.

[@TheToughGuysTV]

Hey!! That’s awesome and thank you for letting me know, so glad the video helped you out!

[@icarusR1]

Great Video......I'm not sure about your read first before installation skills LOL ! BUT in the end you done a good job ..... I give you 10/10 for your fathering skills, involving your son was being a super Dad. Your son will grow up with the confidence and the ability to tackle most jobs. Thanks.

[@TheToughGuysTV]

Thank you so much for the kind words, truly made my day. 🙏🏻🙏🏻🙏🏻

[@justinbishop1744]

Great video! Just bought one on Amazon, can't wait to install it🤙

[@TheToughGuysTV]

Thanks for watching! Hope the video helps out with the install. Good luck with yours!

[@jimmeerpohl8094]

Well done, just received my cover and wondered how to start after reading the factory supplied directions. Your explanation made it clear. I had to supply my own weatherstriping. I used rubbing alcohol to clean the Ford bed liner's flat plastic surface where ever the weather stripping would make contact. Seemed to help

[@TheToughGuysTV]

Hey Jim, thanks for the comment!! Glad your install when well and thanks for watching!! I hope your cover lasts and performs great! 💪🏻

[@jmb3450]

Thanks, nice clear video of the installation process, plus a dynamite helper. I'll be installing this on my 2015 Nissan Frontier today after work and you have definitely saved me some time!

[@TheToughGuysTV]

Jim, that’s awesome!! Good luck with your install and thank you so much for the comment / feedback. I’ve heard Nissan makes a great truck! Thanks again for watching my video!! 💪🏻🙏🏻🛠

[@jmb3450]

@@TheToughGuysTV Installed in 40 minutes, including re-positioning for better coverage on the tailgate. Didn't need the instructions at all, just your video. Thank again!

[@TheToughGuysTV]

Jim that is so great!! I’m so glad it went smooth for you and that the video was an easy guidebook! So humbled for the support and for you to leave your feedback. Helping others out tackling DIY projects is what motivated me to start this channel, so thank you for letting us know!! 🙏🏻👏🏻

[@Sevenfiftytwo]

Thank you! Just purchased the cover used. This made the install a a breeze. Great detailed instructions. Ty.

[@TheToughGuysTV]

Thank you so much for letting me know! Happy the video was able to help you!!

[@Adam12Designs]

Great video! Just installed mine on my 19’ F150. I tossed out the instructions and just followed the video. Easy install. Great product for the price !

[@TheToughGuysTV]

Adam, thank you so much for the feedback!!! I love to hear it and I’m very happy the video helped you!!! We love our cover it’s awesome so far! I did have to do some minor tightening after about a month in, but it’s still doing good!!!

[@ussir]

Very detailed and easy to follow video. I wonder if you noticed any flapping at high speed on a freeway. Considering buying the same one for my truck.

[@bobmcallister5470]

Even better than the manufactures install video! Got my Tyger cover yesterday and will install this weekend, looks like it will be a breeze. Good job, I’m going to be your new subscriber too!

[@TheToughGuysTV]

Thanks so much the for the comment and feedback, truly I appreciate it

[@johnrhopkins]

Great video. I loved seeing you do this with your helper.

[@TheToughGuysTV]

Thanks!! He's the best!! We actually just got a new truck so guess it's time to install a new bed cover again!!

[@ridinmuddytyres]

thanks man, good video. made an easy install clear before i started..

[@TheToughGuysTV]

So glad it helped out! These things are difficult to install!

[@ZombieKiller6905]

Best install video I’ve seen! Thanks a lot

[@TheToughGuysTV]

Hey thanks! Greatly appreciated - glad you enjoyed it! 💪🏻

[@MixingGBP]

Nice job, clear explanation of the install. Now that it has been a few years, how is it working out for you? Any wear? Any leaks? Would you buy this again if you had to get a new truck?

[@TheToughGuysTV]

I kept this cover for about a year and half past the video, then traded in that truck. I never had any issues with it while I owned it, would def buy same one again!

[@MixingGBP]

@@TheToughGuysTV cool. I just installed this one on mine. So far so good.

[@RumbleroomrecordsLLC]

Thank you very much for your video! I checked the part out on Amazon this Sunday and proceeded to watch the manufacturers video which was roughly 3 minutes long. I searched more and then found your video which was very detailed and 'from scratch'... go-backs and all. After watching your video, I felt more comfortable ordering the part. It came in 2 days and I just installed it in no time! I even bought the ratchet set attachment for my impact drill (which shortened the time even more). I must say, it looks pretty nice. I did see light coming in through certain areas which means the foam isn't as flat as I thought it would be. I was going to ask you for your thoughts on it being air-tight, but I saw a few comments below that revealed it's not... and that it's not 100% impenetrable to rain water. Nevertheless, I think it was pretty reasonable and we'll see how it works. Thanks again for your help!!

[@TheToughGuysTV]

Thanks so much for sharing your install / comment - I am very humbled my video was able to help out!! Overall it’s a good cover I think, obviously has some minor flaws, but for the price it’s pretty awesome honestly!! Glad you had good luck as well and thank you for watching!!!

[@RumbleroomrecordsLLC]

@@TheToughGuysTV Absolutely!!! (=

[@KdawgCrazyOutdoors]

Great install video. Sold me on it. Thanks!!!!

[@TheToughGuysTV]

Thanks for the feedback!! Glad the video was able to help you out!

[@BristanKeller]

Great video, much better than other tutorials!

[@TheToughGuysTV]

Thanks for the feedback!! Glad the video was helpful for you! 🙏🏻

[@christopherbeach1706]

Thanks for the video, I was installing mine and was getting frustrated because I didn’t have the tailgate open when trying to close it. Once I tried with the tailgate down it closes much easier and snaps. I thought it was too tight and saw the adjustment was already at the last mark.

[@TheToughGuysTV]

Thanks for the comment!! Glad you got yours installed and that the video helped out in some way. I appreciate you taking the time to share!

[@cavinpatch4285]

Wow great video. Just bought this and this video will help me to install it.

[@TheToughGuysTV]

Thank you!!! It’s a pretty easy install - I hope it goes great for you!! Let us know if we missed any steps and thank you so much for watching!! 💪🏻🤘🏻

[@billbehrens4487]

Great video man! My cover comes tomorrow

[@TheToughGuysTV]

Nice!!! It's a solid choice no doubt! Thanks for checking out the video!

[@dylanjosselin]

great video. I subscribed, and Ill be installing mine tonight.

[@TheToughGuysTV]

Thanks for subscribing! Truly appreciate it, hope you find value in some of my other videos as well. Good luck with the install!

[@dylanjosselin]

@@TheToughGuysTV The install went pretty well. the only issue was it was tricky to tell how far forward or back to mount, and I mounted maybe a 1/2 inch too far back. Only thing is that the rear corners of the cover just barely peek over the edge of the tailgate. its a quick adjustment though. thanks again.

[@gwzaiser]

Nice video and detail, clearly explained. Thanks!

[@TheToughGuysTV]

Thanks George!!! Really appreciate the comment and glad you enjoyed the video!

[@maryweisberg5100]

Thank you for this detailed video. Just leased a 2019 ford 150 and need to protect the bed. Going to purchase and try to install myself so I don’t have to bother my husband. Thanks again

[@TheToughGuysTV]

Mary, that’s great!! It’s really a pretty easy install with only a few tools needed. I’m glad my video could help you out, that is truly awesome!! Good luck on your install, and thank you for watching our video!! 👍🏻👍🏻

[@bretlange969]

i had to install that extra foam piece too. are you noticing your cover is ballooning or lifting towards the front any any speed past 60mph? its making me nervouse, its like the bed is getting filled with air. i have no light leaks and it seems air tight and i have all of the clamps pretty dang tight. i even gorrilla taped from the inside any where i think air may be entering from, any one give advice! fyi this is my first tonneau. everyone i talk to that has a tonneau says theirs lays flat on the high way. is it just the tyger brand??

[@TheToughGuysTV]

Bret Lange may be an issue with yours possibly? I’ve not had those issues - definitely look around in the comments here, lots of good info here. Thanks for watching and for reaching out!! 💪🏻

[@shotkoolerdanu]

I've got the same issue. It doesn't seem to puff up much but I wasn't sure how much is normal. I was looking for videos of someone driving with a cover on to see if I had mine right.

[@Ttimmy]

Just got mine in. I will definitely used this video as a reference, just gotta wait until it isn’t -2 outside 😅

[@TheToughGuysTV]

Yeah definitely don’t be out in weather like that!!! Hope the video helps you out - good luck with the install!

[@bruceterveen457]

Great job explaining the install

[@TheToughGuysTV]

Glad it was helpful! And thanks for watching!

[@MrJsled]

Really good instillation instructions. 👌

[@TheToughGuysTV]

Glad you think so! Thanks so much for checking out the video!

[@triplexrcgarage1499]

Thanks for the video! It really helped.👍🏻👍🏻

[@seanleverone7680]

Just found your video! Well done! One of the best tutorials I’ve ever seen. How’s that cover holding up a year later? I’m really thinking about getting this one (depending on how happy you are with it after a year)

[@TheToughGuysTV]

We had this cover all the way until selling the truck, it never had any issues, occasionally I’d check the bolts to tighten it up, overall was great.

[@joetatoesniff9525]

Great video.

[@TheToughGuysTV]

Thank you! 🙏🏻

[@charlesreynolds3295]

What about running it through a car wash? Does it keep water out then? I have a hard top bed cover on now that only lifts and does not role/fold up. I'm looking for something to be able to get more use out of the bed of my truck. But need to make sure the bed doesn't flood when I take it through the car wash. Thanks!

[@TheToughGuysTV]

Charles, we only seamed to get water in near the tailgate, and a tiny bit up by the front as well. Same would happen in a bad rain storm. It was never more water than the grooves in the truck bed itself, so anything we had stayed dry. I’ve got a hard shell cover as well which we currently are trying out for a bit and I feel like it actually lets more water in. The issue I think is sealing in the truck bed itself. My bed is spray lined, so getting any foam to attached to get a better seal is tough. Thanks for watching and I hope these answers help you out!!! 🙏🏻🛠💪🏻

[@pamschafer8149]

MI

[@rogercalanchi2055]

Wow just put one on your very easy to listen to do some more videos I always need HELP thank you

[@TheToughGuysTV]

Thanks so much for the comment!! Glad the video was able to help you out!

[@corygoodman4846]

This helped a lot! Thanks.

[@TheToughGuysTV]

You’re Welcome!!! Glad the video helped you out! 💪🏻

[@johnnyohara5454]

Awesome thanks help out a lot good video

[@TheToughGuysTV]

Thanks for watching! Glad it help you out!

[@leejaehoon6598]

Hey thank you for the video. I have same truck with you and I was trying to install today but my latch was popping up so easily. Any idea?

[@TheToughGuysTV]

Was it really tough to engage it? Maybe it’s too tight and it’s popping out? Alternatively it may be too loose. That’s a hard one to say for sure without seeing it in person, but trial and error the overall position to adjust the tension when you lock it down. Let me know what you find!! And thank you for watching and for reaching out!!!

[@leejaehoon6598]

The little clip on the side rail was not tight. I just installed it. Look awesome! Thanks!

[@TheToughGuysTV]

Awesome Lee that’s great!! Glad you got it working!!!

[@wolfsilverstacker2352]

Great video, how has it held up over the past several months, and in rain, does it keep the bed dry?

[@TheToughGuysTV]

There is some minor water intrusion from the sides, not completely water right for sure, but I wouldn’t say it floods or anything. The water is never deeper than the bed ‘grooves’ so anything sitting in there is never wet. Only real complain after use is that it makes some noise when driving, as it vibrates a bit. We’ve tried tightening it down, but the sound stays. Honestly I don’t notice that, but my wife does. Overall it’s held up well and it’s a solid bed cover!!! We are going to test out a truck fold hard cover on a trip soon as well and see if it’s any better, so if you’re on the fence stay tuned for that video! Thank you for watching and for reaching out!!! 💪🏻🛠🙏🏻

[@wolfsilverstacker2352]

@@TheToughGuysTV thank you for the reply

[@TheToughGuysTV]

No problem at all!!

[@tpwright85]

My instructions said I might have to cut a hole in the Berliner rail of the clamps don’t line up square. Yours line up like mine, have you had any issues with the cover?

[@TheToughGuysTV]

No it never had any issues. We switched to a different type not because this one was bad, but because I wanted to try a 'hard cover' type. To be honest, I miss the ease-of-use of this model, it was awesome.

[@tpwright85]

@@TheToughGuysTV awesome thanks for replying so quickly! Got mine installed, looks great!

[@ApeX-gh1wo]

Great video, just bought one. Now installing it should be a breeze

[@TheToughGuysTV]

Awesome!! I’m glad the video helped out!! Circle back and let us know how the install went!

[@ApeX-gh1wo]

@@TheToughGuysTV install went great. Only took me a few minutes because I knew exactly how to do it thanks to your video

[@jiangboyu4670]

Thanks for sharing, and it is very helpful.

[@TheToughGuysTV]

Thank you so much for watching! I hope your install goes / went great!! 👍🏻👍🏻

[@michelemckune3809]

I have mine installed. I can't get it to closed, to much tension. It closed and easily before I tightened down the clamps. One clamp I tightened to tight. I can tell, because it bowed the rail a little. How can I fix this?? Your son I'd adorable! I did adjust the the tension as suggested several times.

[@TheToughGuysTV]

I'm not sure on the tension issue. Is it possible it's misaligned / off center? Or maybe they sent you an incorrect sized unit? Hopefully you found a fix in the meantime - Thanks for the note and for checking out the video!

[@asablue4816]

I assume you have the tension plate on the line closes to the bed of the truck. 4th line. Are you sure the cover rails are inserted all the way into the cover? This is where you loosen the one screw and screw the rail to the cover. Doesn't take muc h to make the cover tight.

[@lsglass]

If I didn't like the looks of the side rail clamps, is there any reason I couldn't drill through the rails and bed and through bolt the rails in place?

[@TheToughGuysTV]

Great question - I'm not exactly sure if that's good to do or not. May want to confirm with a local truck accessory shop near you to see if they've drilled through before. Whatever option you'd want to make sure it's removable and fairly easily in case you need to change it for any reason. Circle back if you end up going that way and let everyone know how it went if you don't mind! Thanks for watching and for reaching out!

[@bertpittman19811]

Thank you this! I purchased this roll up after the trifold! The trifold sucks! (Imo) Also have it for sale! $100(130 shipped) For 08 Toyota tundra long bed(8')

[@TheToughGuysTV]

Glad you enjoyed the video!!! I appreciate the feedback and glad you found something you like as well!! Hope you get the other one sold! 💪🏻🙏🏻

[@jimmeerpohl8094]

I too had a BakFlip tri fold, and never again. It delaminated after 22 months and I pampered that cover. Soft seems like the better option if longer term security is not the top priority.

[@BrianJohnson-kw8pt]

Ok I have a 2005 dodge quad door Dakota . I bought a Tyler roll up tonneau cover for my truck . Ok for some reason the cover seems a little to long and the tail gate won’t shut. So would you do a video doing one of these covers on a dodge Dakota around the 2005 models

[@TheToughGuysTV]

I don't have a Dodge Dakota - I'd need to have that type of truck to do an install video for it unfortunately. Good luck!

[@josephdimalante7023]

Thanks waiting for my cover to come today 9/14/2029 from Amazon hope it comes early so I can get it on before it gets dark. Thanks again

[@TheToughGuysTV]

Thanks Joseph! Good luck on the install! Glad the video was able to help you out!

[@mikeangelo9712]

My bars fall thru when I unfold the cover. Installed correct with rails against the truck bed ? What could be wrong

[@armyguyavnret]

Great video

[@TheToughGuysTV]

Thank you!! 🙌🏻

[@alexayala6720]

Thx for the video getting this cover tm

[@TheToughGuysTV]

It really is a great choice! Thanks for watching!

[@dustincarter7258]

I installed mine last night but the front of the roll up cover isn’t flush on my tailgate so there is a gap is that suppose to be like that?

[@TheToughGuysTV]

I don’t think you should have a gap at the tailgate

[@dustincarter7258]

Any way to fix that?

[@asablue4816]

@@dustincarter7258 I was having the same issue. My cover would latch and pop up a bit. Tyger sent me a bunch of things to look at but my install was according to what they sent. I found the top of the rail where the latches insert was bent up about 3 mm. Look at the end and see if the metal rail is above the plastic insert. I was able to tap this down and now my tailgate seal is much better. I can send pics that explains it better. Will have to see how it holds up as I just installed the cover on my Tacoma Sport

[@michaelking42]

Great video, new subscriber here! Say, what camera do you use, the quality out of that thing is fantastic!

[@TheToughGuysTV]

Michael - thanks so much!! For that video I recorded everything on my iPhone XR. Now I am currently using an 11 Pro Max, I really wanted the ultra wide and zoom lenses which have already proven to be great improvements. Plus all newer iPhones record in Stereo audio which really is amazing too. Thanks for your support and for reaching out!! 💪🏻🙏🏻

[@sinout044]

Well done video like other comments after I watched your video I don't feel the need to reread the instructions....

[@TheToughGuysTV]

Thanks so much!! I really appreciate the feedback, that was our goal to really show how to do the install and what you might run into. Thanks for watching and check back to see if we have anything else that interests you.

[@charlesthomas4897]

Very detailed video thanks a lot oh good helper too mine is 6 years old 😆

[@TheToughGuysTV]

Charles - thanks for the kind words!! It’s the best having a tiny helper too! 💪🏻 Thansk for watching and for the feedback - I’m so glad you enjoyed it!! 🙏🏻🛠

[@Gatordad1717]

Sold. Thank you bro

[@TheToughGuysTV]

Thanks so much! And I appreciate the subscribe!

[@BruceLee-ku6jt]

Great viddy mate!! 🤙🏽🤙🏽 cheeee

[@TheToughGuysTV]

Thanks man!! I appreciate it! 💪🏻

[@BrianDoesThingsLLC]

Thinking about getting one for my 2019 F150 XLT, how has your cover held up since you installed it? Would you get it again or go for something different ?

[@TheToughGuysTV]

It held up pretty well. We ended up getting a 2nd cover for longer trips, we were taking a long trip to CO, but then we ended up using it all the time. It ended up being more versatile overall - I did a video as well on it. 👇🏻 kzbin.info/www/bejne/pWqxpGqjg62BfJo Thanks for reaching out! 💪🏻

[@jeffwallsinger6411]

Great vid!

[@TheToughGuysTV]

Thanks Jeff! Much appreciated and thanks for watching!!

[@docholliday2961]

What's the total price of it out the door?

[@isaelmelchor4747]

Is this the T1 T2 or the T3?

[@TheToughGuysTV]

Isael Melchor it is a T1 - Thanks for watching!!! 🙌🏻💪🏻

[@isaelmelchor4747]

The Tough Guys Just subscribed thanks for the video.

[@franksmythe6969]

TOPRO=TOP PRO. As in a top for your truck bed.

[@TheToughGuysTV]

Well alrighty then!

[@Gatordad1717]

Also, subscribed

[@TheToughGuysTV]

Thank you so much!!!

[@Goodfella1960]

Just ordered a set of 4 additional clamps on Amazon for $20. I figured, hey, why not?

[@TheToughGuysTV]

Can’t hurt that’s for sure!!! Thanks for the comment and for checking out the video!! 💪🏻

[@chrisratcliff8155]

Mine won't lock and I can't figure out why

[@TheToughGuysTV]

Have you tried to adjust the overall tension? Could there be anything interfering with the locking mechanism? Hard to know for sure but I hope you’re able to figure it out! If it is something weird and you’re able to fix, please share here so it may help out others in the same position! Thanks for watching!

[@MrKalon52]

You should do a video with your shirt off ;)

[@TheToughGuysTV]

I’m trying to GAIN subscribers not LOSE them 😂👍🏻

[@RejakC]

Can it be opened with the tailgate closed?

[@TheToughGuysTV]

James, I do not believe there is a way to release it without opening the tailgate first. I know here are some types that do allow you to leave the tailgate up, but this one doesn’t not. Thanks for the question and for watching!! 👍🏻👍🏻

[@RejakC]

@@TheToughGuysTV makes sense, I didn't see the latch mechanism on the end. That's pretty awesome for being as cheap as it is.

[@TheToughGuysTV]

I really like it! My wife’s mother has one that is spring loaded and retracts into a little box near the cab and that one has a key lock so you can open with the gate closed. This one is pretty awesome for the money honestly, and it’s an easy install.

[@1967powerman]

just tried this on my ram 1500 reg cab and three bolts sheered in half. going to try find replacement bolts that are better. oh yeah i had tightened them and they snapped in half.

[@TheToughGuysTV]

Lou, thanks for the info and yes these bolts don’t seem to be super high quality. I tried to be easy with the impact driver as I went not to wrench too tight as well. If you don’t mind, let me know where you get those replacement bolts here maybe to help someone else in the future!! Thanks

[@asablue4816]

Should only torque to 26 ft lbs.

[@theshepo2082]

Ridgid batteries suck

[@TheToughGuysTV]

I had good luck for many years, but later on it's not been so great for me.

[@theshepo2082]

@@TheToughGuysTV i went through 2 sets in 2 months. I do like ridgid but dont use there guns anymore. PS the video helped me out a lot, i had mine on in no time.

[@Aerospacer77]

"TOP PRO" Not "Tow Pro" Duh

[@TheToughGuysTV]

That would need 2 P’s otherwise it’s “Top Ro” - maybe we can agree it’s a terrible name either way? 🤷🏼‍♂️

[@fgsrdgstfgr]

After you install this on your Ford, you might as well replace the transmission, brakes, door hinges, emf sensor, maf sensor, radio harness, front headlights and entire front suspension....

[@TheToughGuysTV]

Yeah! Blah blah, FORDS, blah, blah, blah, TRUCK STUFF, blah blah, blah, blah, JOKES, blah, blah. My truck runs just fine for us. I’m not a truck enthusiast, I drive it to work everyday. If it’s your thing to trash certain brands, I can’t stop you nor care to - just saying that for some people a vehicle you hate may be just fine for them. Me personally, I’ve got better things to worry about. ✌🏻 Hope you have a good day!