RIGHT?!? It’s like cutting off your nose to piss off your face! What the hell is going on, is there lead in the water? Those have always been the pussy horns, now people are doing it on purpose? There is no argument about the sound First set: powerful attention Second set: hamster chasing cheese 🧀
@175myles7 жыл бұрын
The OEM ones sounded way better.
@Zpalq7 жыл бұрын
also what is the stats of the pc in your profile pic?
@175myles7 жыл бұрын
It's 5 years old, but still powers on. i7 2600k, Asus TUF z77, Asus 660Ti SLi, 16gb G-skill. I don't have most of the parts anymore, but I like the picture.
@bigdaddymex20037 жыл бұрын
Exactly my thoughts
@aygwm6 жыл бұрын
Wow seriously all that work to make your horns sound worse
@tonytober6 жыл бұрын
Agreed, but a horn is supposed to sound annoying, loud and catchy to get people's attention ASAP, which I think the Hella horns do the job well.
@MrUltraworld7 жыл бұрын
The stock horns sounded better.
@oscarmart12 жыл бұрын
0:34 11:53
@00j804 ай бұрын
yeah but these make the car look sick
@atraxr6037 жыл бұрын
Cutting the original connector was completely unnecessary. You could have just plugged it into the original connector. You learn something every day I guess. Btw, stock ones sounded better.
@RobRealistic6 жыл бұрын
I was like W TF! Why are you cutting the oem.... ahhhhhhhhhhhhhhhh
@Typhlosion1006 жыл бұрын
I would’ve just ran the female connectors to the oem pigtail in case you decide to go back to original.
@Sad0felix4 жыл бұрын
Let's be very, very generous, and assume the OEM females were much bigger than the fast-on he used. Now, he wrapped the 2 junctions without isolating them. Guess what's going to happen ...
@Christian-si6no3 жыл бұрын
I think they're volkswagen connectors. Wouldn't work with the new horns.
@mmyrvold54948 жыл бұрын
stop, stop, stop! You guys have to isolate the female and male connectors from touching! Now, as it is connected, they will short out. Use some electrical tape or headsrink. If they stop working, the fuse is burnt! its weird it worked at all if u ask me..
@frenchkey8 жыл бұрын
finally somebody saw it
@milanmastracci8 жыл бұрын
Because we did use it..
@BattleB3rry7 жыл бұрын
quick question, when I received my kit it came with a weird 3 prong fuse that wasn't shown in your video, is that something I need or what cause I don't want to use it and have it cause a problem or not use it and have it cause a problem
@dafewcha21107 жыл бұрын
Noah Berry that weird three prong box is a relay you wire to your stock wire harness so you wont burn out your wire harness or horn button these guys doing it wrong
@V1N_5747 жыл бұрын
If you did use some sort of isolation you have to show it since a lot of people that don't know about electrical stuff will see this and messed up their cars!!!!! Be responsible when uploading DIY videos!
@bserna36733 жыл бұрын
Be sure to separate those two new metal connectors you installed otherwise it will short out the circuit and blow your fuse. Staggering the new connection is a good way to keep them separate.
@DavidB4458 жыл бұрын
Surely you could have used larger spade connectors and slid them into the OEM plugs? Saves cutting the loom up and can easily reinstall oem horns plug and play if you came to sell the car etc..
@thesniperofcs8 жыл бұрын
that's right
@nuhdhefurt8vyrfhvubw8 жыл бұрын
My thoughts exactly
@michaelprice70057 жыл бұрын
You beat me to it.
@SupahEXPE006 жыл бұрын
Precisely.
@walterfugate65207 жыл бұрын
0:33 vs 11:52
@edbassmasterplaylists41697 жыл бұрын
Walter Fugate thanks
@esqueue6 жыл бұрын
Saved me lots of time. I was just looking for a sound comparison.
@josegonzalez60895 жыл бұрын
Thank you
@xkclearly6665 жыл бұрын
Walter Fugate A real one.
@ltdasilva938 жыл бұрын
The bad paint match on the bumper upsets me
@harris83908 жыл бұрын
Right? It actually looked really bomb when they first dipped it but after the re-dip after the front bumper got hit it all went to shit.
@surviveasl8 жыл бұрын
Its a primer not paint/plasti dip...
@harris83908 жыл бұрын
+Nabeel S Wow, didnt know that. Usually primer is a flat black. Maybe they should have re-dipped because the color contrast is obvious.
@hamzad76058 жыл бұрын
The bumper hasn't been painted
@trippripp63986 жыл бұрын
Harris Montevallo Afridi lol, scaly primer is usually grey
@biker9320126 жыл бұрын
Good lord!!! Oems sounded way better.
@teluvv662 жыл бұрын
What a great pace of instruction with clear video angles to show you step by step on how to do this. Thank you so much. Keep up the good work. Digital hi-fives to all your helpers in the video :o)
@hellomoto123ish7 жыл бұрын
Why in the hell would you use an extension wire where you don't need it...
@ronil_singh7 жыл бұрын
Cover the exposed connectors with electric tape to avoid short circuit.
@omgvic8 жыл бұрын
Got some Hella horns for my 8G Accord months ago, but I've been lazy about installing them because of the splicing and wiring. Found out today that College Hills sells a wiring kit that uses the oem connector so they'll finally be going on. Thanks for the vid
@finisher3x5 жыл бұрын
So you switched out a strong horn, for a wimpy horn?
@tommyg4135 жыл бұрын
finisher3x yes they did, man-sized horn 📯 for little toy car 🚨 horns. Lol
@sadzidsmajkic61817 жыл бұрын
Original ones sounded much nicer, but that's just me. I think the upgrade is not worth the time and money.
@Zolt93 жыл бұрын
Thanks for the video bros, for everyone talking about the OEM sounding better, I believe its because they need to be close together, just like the OEM, other than that these are much louder
@stevenharpervw5 жыл бұрын
I don’t give negative comments but fair play to you for making 13:32 min video out of replacing 2 horns, in eric the car guy couldn’t do that
@LuigiLong Жыл бұрын
Really well demonstrated and made it look so easy, plug-and-play, just how I like it. Thank you guys so much!
@milanmastracci Жыл бұрын
Glad you liked it!
@iTeach7911 ай бұрын
Excellent presentation. Your video is clear. Your instructions are concise. Thank you for this. Well-done.
@Matthewsmacku6 жыл бұрын
You made this video way more than it needed to be
@CHIBA280CRV7 жыл бұрын
Cool but I think the original horns sounded better ! And it does matter if the connections of negative and positive are correctly attached. The horn speaker will pulled in if they are in the incorrect polarity not giving you a clear and proper sounding horn ..try with a speaker , you'll see it pulls the speaker in instead of outward...
@speedmaster0015 жыл бұрын
I would have used a wire adapter to mate with the OEM plug. This would give you a cleaner look and the ability to go back to stock if you are selling the car. Since you went the route you did, you could have used a heat shrink tubing at the end of the mesh wire sheathing. This will keep the end of the sheathing from splaying over time. Your stock horn actually sound better. I think the PIAA sports horn would sound better that the Hellas you've used here.
@BobSlayer20002 жыл бұрын
me too 🤦♂
@edgarmozqueda7 жыл бұрын
correct me if I'm wrong but you could snap only one connection straight to the horn and avoid all the extra cables and the bullshit male and female connectors 🤔🤔🤔
@cahman86 жыл бұрын
A lot of vehicles you could simply put a male spade on your jumper going directly into the original wiring harness with out cutting it.
@charleshines61554 жыл бұрын
what about some electrical tape or heat shrink tubing over the connection you made to the original wiring? It would prevent a short and the problems that come with it.
@trippripp63986 жыл бұрын
this guy repeats the same thing 47 times before he actually does what he says he's gonna do
@rowdyrick70916 жыл бұрын
Tripp Holland dude that is the truth like bruh ok ok yeah you said that ok fuck just do it already... but I still watch all his videos..
@JDLC958 жыл бұрын
Man, those exposed connectors. -1 point for Milan lol
@soggytortilla0663 жыл бұрын
Yo my name is Milan too
@sergedenovo23893 жыл бұрын
@@soggytortilla066 -1 for you too. …Just on account of your name being the same as this hack. lol
@soggytortilla0663 жыл бұрын
@@sergedenovo2389 no way really
@biggaywizard8 жыл бұрын
I just picked up an '85 Tercel SR5 4X4 wagon that I want to build into a Apocalypse rally car, of course the horn doesn't work (and there's only 1!). Thank you for the install video, now I've got some ideas on what I want to replace the stock horn with and where' I'm going to mount them.
@dasarge844 жыл бұрын
just for the recotd the hella supertones come in the trumpet style horns as well this style is most popular as the vibrating plate horns are actually much louder then trumpet horns
@JeffreyMillerPA3 жыл бұрын
Curious about reliability. The new ones seem really exposed to debris versus the housing used to protect the OEM.
@ramrajjiwanand11028 жыл бұрын
hold up ... the spade clips are exposed and will short secondly the OEM horns sound better
@esanchezp3 жыл бұрын
I agree with the other, it sounded better with the stocks horn but I think it’s because they are far from each other. However, kudos on your very well done instructional video. Very detailed and very easy to follow. Great work guys 🤙👊
@mountainman61755 жыл бұрын
Original so much better. New one made me picture a frenchman on a moped driving through Paris traffic pipping his horn
@milanmastracci8 жыл бұрын
*PEOPLE FREAKING OUT* In the video, I did not show you to wrap the connectors in electrical tape, however I mentioned it would be a good idea. We did do it and separated the positive and negative connectors so they wouldn't short out. The style of connector we used would not touch, but for added measures, you can wrap them. Look at 11:19 and look at the connector on the left, how it is insulated in the electrical tape.
@vaioskaliakoudas63887 жыл бұрын
milanmastracci you could also use a heat shrink tubing to insulate that tube
@Hunter-ou5bw7 жыл бұрын
Or a female like that is connected to the horn, whit shrinktube around.
@iratodd88677 жыл бұрын
milanmastracci you didnt have to lengthen the driver side wires for the driver side horn
@TheMedijuana6 жыл бұрын
Still you twist wires..... its wrong so stop doing/showing it. Electrical tape is a very poor replacement for shrinkwrap. You do so much cool stuff on your channel only to bum out hard on stuff like this. Watch a pro electrician its not that hard......
@Silveradoguy6 жыл бұрын
Not seeing it wrapped can make some installers or electrical workers really cringe their teeth hahahaha I know I did
@appleman8128 жыл бұрын
long awaited video but its here !
@reaper7actual1354 жыл бұрын
This dude is the king of doing the unnecessary 😂😂
@dh81767 жыл бұрын
By far the best video on how to replace horns, thanks guys, will be giving it a go despite being a complete novice with cars lol
@darkunicorn12088 жыл бұрын
I can see how this would annoy neighbors and eventually contaminates through the bumper will destroy these horns. but I like the installation. very clean look.
@HillbillyRednecking7 жыл бұрын
Those plastic ramps you're using work pretty well, even on the front end of an 8000 lb pickup
@V4p3rcl0ud6 жыл бұрын
I use the same ones too, they are really good
@stardic8 жыл бұрын
BRO! Those belong on a Subaru, but good video. They are amazing on the highway and for scaring animals out of the way.
@jackiechan_wtf40418 жыл бұрын
Why do they cater only to subaru, and not the rest of other cars?
@Moores168 жыл бұрын
+Jackie chan_WTF because Subaru.
@jackiechan_wtf40418 жыл бұрын
+Moores16 Back history? No? okay then.
@Moores168 жыл бұрын
+Jackie chan_WTF I'm not Google.
@jackiechan_wtf40418 жыл бұрын
+Moores16 Why did you reply to my original comment then? "because choices" haha. jk
@alfa85875 жыл бұрын
OEM much better.. The HELLA ones not even close by sound at all..
@S_S_420 Жыл бұрын
True
@wolfmxbee2146 жыл бұрын
I just came across your channels and after watching this, am subscribed now!! As good as gingium, Adam lz, and kalvins garage!!
@jacobjohnson78156 жыл бұрын
I'm surprised anything on this guy's car work. He twist wired his friends speakers together and didn't heat shrink and thing over it or anything. Have fun with electrical fires.
@robertbairt928 Жыл бұрын
Thanks 4 Dollar Store tip👍
@lucruz99906 жыл бұрын
would have been better if you had used all 4 horns
@MsCellobass4 жыл бұрын
Wow how vain does one have to be to show off parts of your car to go through the trouble of tweeking it so it’s more visible!?
@MsCellobass4 жыл бұрын
If I have better breaks why would I wanna show it off ?? I just care that I am able to stop quickly and safely!!
@MsCellobass4 жыл бұрын
I have a better air intake and changed out my back axle exhaust to had a bit more power but heck my civic looks just fine without showing off my upgrades😁😁😁
@Wolvey108 жыл бұрын
Being that it's right in front of a vent thing, won't water screw those up?
@mikep4905 жыл бұрын
Disk horns are sealed.
@OGRH4 жыл бұрын
Don’t worry the rubber thingies attached to the dangley doodads will keep water from getting into the round whatchamacallits. 👩🏾👱🏻♀️👨🏿🦳👨🏻🦳
@ulrichwillems60726 жыл бұрын
OEM sounds much better imo
@airsoft90774 жыл бұрын
Yeah. I mean it's really just a style thing, I don't think anyone gives a dick what there horn sounds like unless it's a wheezing cat
@unknownuser53674 жыл бұрын
the “hella” horns sound like a toy car
@shanec44414 жыл бұрын
Yes OEM sounds better - I will take the originals
@russellbrown96554 жыл бұрын
Solid video. I'm sure you guys have seen the comments about the OEM horn sounding better, they just do. The Hella horns sounded like tin cans. But you guys are saving many others from doing the work with the hella horns
@BMPFAEIndustries6 жыл бұрын
this is very rad, i am thinking of putting a train horn on my SUV.
@OGRH4 жыл бұрын
You should’ve installed those two Hella horns first! Then make a video saying the last owner was an idiot and reinstalled the stock horns!
@AzeOfSpadez8 жыл бұрын
"Up and uut" LOL i love this
@MrGetBad4u8 жыл бұрын
I put hellas in my STi. The red paint fades veryyyyy quick. I got them powder coated candy red and it works lovely. No more fading, rust or worries. Good video man. I ended up using a pre-made wiring harness for the STi on mine. But this works too.
@milanmastracci8 жыл бұрын
Yeah the red on my hella's that are on my accord need some loving. Getting them powder coated is a good idea :)
@MrGetBad4u8 жыл бұрын
+milanmastracci i got them powder coated about a year ago and it still looks like it did when i first got them done.
@DustlessYeti768 жыл бұрын
I was looking for this yesterday lmao
@cop25064 жыл бұрын
I like the older horn. It sounds more substantial, that high pitched noise is so annoying
@MrChris2Fur8 жыл бұрын
Damn, so many people getting on your case for the wiring haha :P
@angelguzman49555 жыл бұрын
The old ones sound better nice job do
@frankflores56475 жыл бұрын
Good job guys.
@Cliffester5 жыл бұрын
You setting up your self for a blown fuse the first horn female connector you installed are of the same length you should have wrapped them in electrical tape to insulate them from each other.
@Thebman-rg4pt7 жыл бұрын
If you hook the wires up backwards the speaker will phase in the opposite direction making it sound weird. So try it both ways if it sounds funky
@keithc7287 жыл бұрын
one thing I would have done differently... When you placed the wiring in the sheathing. I would have put each wire in shrink tubing prior to putting it in the sheathing so the connectors were not touching. Good video though I am going to place them on my Mazda.
@andrewschwallenberg1408 жыл бұрын
Yeah definitely do something to protect the terminals from the elements. Also, you can get heat shrink instead of that snake skin sheathing, works much better.
@johnskinner31027 жыл бұрын
The first wire could have reached to the horn without the extra wires and since u left connectors bare they can ground out
@jballze4 жыл бұрын
So, how long did it take before you shorted out 😂
@GMWsho8 жыл бұрын
Mount them in the centre of the bumper :) just do it! :D
@andrewcordova84003 жыл бұрын
Dam that sounded pretty dope! I wanna do that
@erniesbudolab6 жыл бұрын
Two observations: 1). The orientations of the horns will allow water and debris to enter the drivers. Normally, horns should be pointed downwards. 2) Polarity is important. If ground is connected to the positive post of the driver, the horn will “pull” instead of “push”. It will still make noise, but it won’t operate at full efficiency.
@jimcooper30485 жыл бұрын
Unfortunately, these hella horns do NOT have a + or - marked on the terminals. I just got a set today and one terminal has a 12 stamped into the solder, the other one has an 18 stamped into it. Basically NO instructions on how to install.
@odidiaz74927 жыл бұрын
you should honk the horns to get more air to your intake lol
@RH-ib7bg5 жыл бұрын
Educational maybe but man those factory horns sound way way better. I would maybe put those on a vw beetle
@spazzedoutpablotv21788 жыл бұрын
Bro I love your vids I'm currently modifying my m4 and your vids give me inspiration
@andysgaragetherapy7 жыл бұрын
Great wiring video! I just picked up a set of Supertones and thought it might be complicated. Thanks for assuring me that it isn't! Cheers!
@antongeraldoy80315 жыл бұрын
You should have covered the cut OEM plugs individually with E Tape. They will touch and you'll have a short.
@UnitedWeBrap8 жыл бұрын
love it. keep up the fun and good work!
@ElPadokiller8 жыл бұрын
i rather put in that position some fog lamps. Btw nice videos loving the golf series
@tylerwong72727 жыл бұрын
very helpful, good job guys !
@DJ-vw6ov6 жыл бұрын
To address corrosion down the road; what I do is use heat shrink tubing and silicon. Just squeeze the silicon inside the heat shrink then as you heat the heat shrink the tubing will shrink and silicon should run out of both ends of the tubing (heat the tubing from the middle out towards the ends). Water tight seal. This will last until the horns die. Electrical tape will just not hold over time. Great video.
@diegoquintana92058 жыл бұрын
Sounds like my sisters Nissan Sentra
@tommyg4135 жыл бұрын
Air 💨 Horns 📯 (ie - train 🚆 horns) are louder than all of those. 135 db's!!!
@problemchild19762 жыл бұрын
Thanks Useful - that first side you could have just put the female connectors on the OEM wires as they reach I’d also heat shrink the joints
@Grey_f3z5 жыл бұрын
Yeah why do you want them sounding like a Toyota Yaris
@domd998 жыл бұрын
Can I ask why you didn't use the hella relay? Apparently it make the horns significantly louder. Great video as always!
@jimcooper30485 жыл бұрын
actually, that is why I went looking for vids like this ... I just got a pair of the same horns and I'm thinking the relay that came with them is probably for MORE AMPS (current) than the OEM teeny horn ... but the box has almost no instructions ... a visual diagram that doesn't explain itself at all. My GUESS is that the new relay can probably just swap out whatever horn relay is in the fuse block now ... but they don't say whether the OEM fuse should be increased. Probably not point in increasing the wire size, since the horn is not often 'on' for very long, so the wires won't heat up in that short time.
@hisarsimatupang84857 жыл бұрын
You guys didn't even install any horn relay
@tgkg5 жыл бұрын
Nice twin turbos.
@christianbugatticg7 жыл бұрын
"How to install twin turbos"
@jfresh20548 жыл бұрын
nice shorts
@catyson917 жыл бұрын
Thank you for this! I hope it's as easy to install on my ms3.
@battlefrog338 жыл бұрын
Daaaamn twin turbos
@rickyb22003 жыл бұрын
Connectors need heat shrink or electrical tape to prevent shorting out, they can touch each other or come in contact with metal !!!
@drprzulj8 жыл бұрын
8:42 seems like + and - could touch. I hope you isolated it.
@majortom45436 жыл бұрын
what could happen to the car if they touch?
@NormEatsRice5 жыл бұрын
@@majortom4543 you ever divided by 0?
@majortom45435 жыл бұрын
@@NormEatsRice Have you ever answered a simple question?
@NormEatsRice5 жыл бұрын
@@majortom4543 lmao you're duuuuuuuuuuumb bro
@eagle2D27 жыл бұрын
Wasn't the OEM plug female? Why not just pug the new male plug into the OEM plug?
@charisstef8 жыл бұрын
Little messy with the electrical stuff, you should be little more carefull! Still great vids!
@AzeOfSpadez8 жыл бұрын
"We took that uut" lmfao
@KenjiP118 жыл бұрын
3:39
@rosegold-beats8 жыл бұрын
congratz on 60k
@tacraheennc97198 ай бұрын
Hella good job
@slashroxs118 жыл бұрын
I gotta stop watching your videos, dude. After every video of yours i watch, i go out and spend hella money on my car 😩 keep it up! 👍🏻
@GTiR238 жыл бұрын
hella money on a Hella horn
@mr.tuckers28484 жыл бұрын
Why weren’t relays used? I hope the current draw was considered otherwise before directly wiring straight from stock harness.
@tkdrgnon3 жыл бұрын
Like the sound of the old horns better
@hass13378 жыл бұрын
love your vid btw arent they going to get dirty from the road grime
@traymuse38108 жыл бұрын
yes, he don't care papa
@waynerivilla76623 жыл бұрын
I noticed that you did not pur any insulation to your connectors. The exposed metal of the connectors may touch each other.