How to Install Aftermarket Horns in Your Vehicle

Today I installed some aftermarket horns on a '83 El Camino. In this video I explain how to install them yourself with a simple wiring diagram and walk you through the installation. The same basic steps apply to any installation.
The horns used in this installation:
Harbor Freight Part# 99911
www.harborfrei...
As an Amazon Associate I earn from qualifying purchases, at no extra cost to you. Thanks for supporting the channel.
16ga Primary Wire:
amzn.to/3rw8RuO
In-line Fuse Holder:
amzn.to/3c6yw6M
12V Momentary Switch:
amzn.to/30pCsu6
Universal 12V 30A 5 Pin Relay:
amzn.to/3v07IxM
Wire Terminal Kit:
amzn.to/3t2HZmM
Assorted Fuse Kit:
amzn.to/38j7xUr
Heat Shrink Tubing:
amzn.to/3v7hA91
T-handle Reamer:
amzn.to/38p6TVL
Klein Tools Wire Crimper:
amzn.to/3cgcb6P
Irwin Automatic Wire Stripper:
amzn.to/3kY4Ixd
Neiko Step Drill Bit 3pc:
amzn.to/38kNpBs
Due to factors beyond the control of NutsAndBoltsAuto, it cannot guarantee against unauthorized modifications or improper use of this information. NutsAndBoltsAuto assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. No information contained in this video shall create a guarantee, expressed or implied, of a particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not NutsAndBoltsAuto

[@emmehall4092]

I just installed a horn in my off road Miata with this video. It's so great and easy to follow. THANK YOU!!!!

[@randallmontejano7787]

Working around wiring is my weakness yet I can read it. But this install gave me confidence to translate wiring from diagram to the actual thing. Thank you so much for uploading great content everything from Ford to the good ol Chevy 😎

[@ruthkamo3891]

Explaining using both the diagram and exact wiring make it much easier to understand. Thank you very much. Now I can wire my truck's horn.. 👍

[@lavapix]

That was perfect. I already knew how to do it but very well explained for those who were unsure. You can also get wireless buttons. I'll be trying one soon.

[@randallmontejano7787]

Wireless horns??

[@manny1887]

@@randallmontejano7787😂😂 gonna yell out “BEEP”

[@artvr2961]

This is the absolute best video with the best diagram that I have seen, after watching many many like this. Thanks. Too bad it took a year to find it.

[@srd722]

Very helpful and excellent drawing with a good explanation. Thank you.

[@jetsgo66]

Great video. Much more clear and to the point compared to other videos I could find

[@bravemind8152]

Thank you sir, for an excellent, concise and clear explanation. It helped me over not only to understand how to install a horn but also some important basic car electricity concepts plus the concept of the relay. I also learned some simple but, important techniques in doing the job perfectly. Thank you very much again. Keep on the good and concise work. Best regards

[@patrickmckiernan8706]

Good deal! Exactly what I was looking for.

[@Tom-bl4rh]

Excellent Tell ‘‘em what you’re going to tell ‘em Tell ‘em Tell ‘em what ya told em Thanks

[@S-Kidz]

Very nice mr sir. That thumbs up after it worked was epic 👌🏼

[@randallmontejano7787]

Guess who's thumb it was? xD

[@MrDreis4444]

Very good video Sir. Easy to follow, easy to understand.

[@LachieMac]

That's the best installation explanation I've seen yet! Cheers Mate!

[@westwind786]

Very clearly explained, I am taking auto electrical diagnostic and am looking on KZbin for video. Thanks.

[@none0ya0biz]

Great video thanks!!

[@grabbingyourattentionpodcast]

Great Quality content on every level Thanks

[@zacharycarter6656]

Good job. You used the non-insulated crimp part of the tool on an insulated crimp, both ring and butt splice. If you'd used the back side that said "insu" you wouldn't have risked piercing the insulation and wouldn't need the heat shrink.

[@ricardovelez958]

Thank you!

[@robertrosano1964]

Nice work 👍

[@FlushtheSystem]

Dude great video. Thanks

[@markalmeida3816]

Excellent vid, a ``BIG`` thank you!!!!!!!!!!!!!!! my car Vauxhall zafira b, cim module issues, UK

[@janithniluksha8211]

Good job Good luck

[@bradm6205]

Perfect! Thank you

[@danwalsh8930]

Hello...... I realize this is over a year old but hopefully you see this......Would you know how to add an additional horn button to an exesting 12v horn? Thank you in advance

[@innocentmadzivanyika8467]

Thank you so much bro but i didn't get the switch part clearly. Right so we have power coming from the relay pin 85 to the positive of the switch okay. So where is the other pin on the switch connected to

[@jr8472]

Pin 85 can i use the old connection from the single horn and then ground the opposite?

[@frankienewera]

Can you please make a diagram on how to wire a vevo air Horne kit please

[@beast_0012]

Honk go vrooom vrooom

[@chrisrath3418]

What horn kit did you buy and from where

[@randallmontejano7787]

Harbor freight

[@RyanJK88]

Great video, wish you would have honked it though

[@NutsandBoltsAuto]

Check out 8:45 ;)

[@wbball15]

Merci

[@jimbob5885]

just curios why you didnt you use the stock factory horn wire from the original car horns ,, it has a relay it self and i used the factory horn wire and added 1 relay and took out my 2 stock horns and replaced with 4 caddilac horns my 97 mercury sable sounds like a train and its loud ,, i use my regular sterring wheel horn pad switch

[@NutsandBoltsAuto]

The wiring in this vehicle is a bit of a mess, so doing everything from scratch was the best bet. You certainly can use the original wiring, if that's an option. Thanks for watching! 👍

[@MUKESHMUKESH-fp7nr]

What about fuse??

[@keithryan3773]

Hey where can I get all the things I need to install my horn? I’m trying to do exactly what you’re doing but idk where to get all the items.

[@randallmontejano7787]

The horn was from harbor freight, I had spare wire.....idk where I got it but it helped us do 2 projects, the relay my buddy had it as well as the buttons that he bought I believe as a bunch for idk maybe $4 for 8 or something like that

[@Thecarcare]

IS that horn will work even when the car is switched off ??

[@randallmontejano7787]

Yes