How To Install Aftermarket Seats / NRG / Buddy Club Seat Rails BRZ

In this video we'll be installing an NRG FRP-300 racing seat into my turbo BRZ in preparation for Club Loose using a 3.3 ohm resistor and Buddy Club Lowered Seat Rails. This seat and rail combination is being installed to allow more head space for drifting with a helmet. These same steps apply for the FRS and GT86 as well.
Be careful when mounting expensive racing seats with these rails, you will scratch them extremely easily!
Parts/Tools Used In This Video:
ETorx Sockets: amzn.to/307sGdP
3.3 Ohm Resistor: amzn.to/2J7RRra
NRG FRP300 Racing Seat: amzn.to/2FQJ3nz
Buddy Club Seat Rails: amzn.to/2LFFOCS
Electrical Tape: amzn.to/307lxKv
Heat Shrink: amzn.to/30am4eU
Heat Gun: amzn.to/2XNVqL2
Favorite Tools:
M12 Fuel Ratchet by Milwaukee: amzn.to/2LAzhtl
My Recording Equipment:
Galaxy S10+: amzn.to/2Jcmr1z
Rode Wireless Go: amzn.to/2FDlnmA
Rode VideoMicro: amzn.to/2Xjkhar
Rode TRS to TRRS: amzn.to/2XDlSHg
If this helped you out or you simply enjoyed the content, feel free to like, comment, and subscribe I appreciate the support; thank you for stopping by.
Support the Channel:
Check out Honey; it's a great way to save a ton of money shopping online!
joinhoney.com/...

[@XLLUSIVEBeats]

Bro this video just saved me from a stress overload thank you

[@jordancajigas2166]

That has been the most detailed helpful video i have found. I really appreciate the help

[@zackhewitt1147]

This was great the production quality was really high and it was nice and easy to follow

[@MarkMethods]

Appreciate the feedback, glad it helped you out!

[@blazeclarke]

Been struggling to slide my passenger seat - this guide should help me out a bit, thanks 👍

[@MarkMethods]

Glad it worked for you, I definitely struggled as well during my attempt.

[@ryevdee6064]

You got me with the finger pointer....ordering one now XD

[@MarkMethods]

It's a necessary prop lol.

[@user-km9vs8no8d]

Very helpful

[@Wtfwoadie]

Thank you man! Great video

[@jessicacomma]

Super helpful ty

[@MarkMethods]

No problem, glad it helped!

[@lex4lyfe870]

Did your rails come with the washer and bolts for the side? Mine only came with locking nuts

[@loymunho8218]

awesome video man. definitely will help my install

[@MarkMethods]

Hopefully it helps out! Just be careful with the rails against those gloss surfaces on the seats, it will scratch them super easy.

[@loymunho8218]

@@MarkMethods alright! will definitely be careful :)

[@yemanshalabi988]

how tall are you if you dont mind me asking? im 6'3 and would love to know how much of a drop is going aftermarket going to give me

[@MarkMethods]

I'm 5'10, you'll be cutting it close but it's a possibility you'll fit. There are also planted plates for the absolute low but they're fixed.

[@odszza]

What size are your seats?

[@mbnnate2274]

I know this video is 3y old but I have these for my 350z and neither seats slide, would it be binding? And would prying it like you did on the brackets possibly fix my issue?

[@MarkMethods]

If it's binding, more than likely there is a slight alignment issue with the tracks and the base of the seat. Try loosening the bolts to the floor and shift the seat back and forth then left and right. See if you can move it then by sitting. Tighten the bolts again and it should be fine.

[@ethanbaker4156]

How do you bypass the passenger seat occupancy sensor?

[@MarkMethods]

I saw on the ft86club forums a solution but I'd need to research it more; it does seem slightly more involved than a simple resistor.

[@tristeboyz6997]

Dope bro! Keep it up

[@MarkMethods]

Thanks, I appreciate the support!

[@Letto0511]

Could you have used the side mount brackets that came on the seat to install it into the car or?

[@MarkMethods]

I believe you'd still need a fixed mount plate if you used the included brackets such as the unit Sparco or Planted make.

[@Letto0511]

@@MarkMethods Thanks that's what I was thinking. I'm mostly concerned about retaining the OEM seatbelt as well. I just went ahead and ordered the same BC rails as you lol. Thanks for the video man, keep it up!

[@mykalenhosley7406]

Are those seat rails universal? Will they fit in a camaro?

[@VictorFreakingLe]

Can you use the same resistor on the passenger side?

[@MarkMethods]

Yes, that should work.

[@VictorFreakingLe]

@@MarkMethods yeah I installed it about a week ago and the sensor and everything works with the pole position!

[@mojojoji5493]

@@VictorFreakingLe which ones do I get are they al the same

[@VictorFreakingLe]

@@mojojoji5493 just got some off eBay and it worked