Thanks! Clear and concise..... made my job easier.

I’ve been using this for years but just for trim

I’m confused as to why he hammered on the filter after tightening it.

Where i can hookup 12v positive connection for relay?

U don’t need an alignment shop to do a toe alignment on the rear, you can’t adjust camber so just measure the rear toe and get the wheels straight

Hit the nuckle with the hammer son

Hi brother,how to off the sound lock /unlock for Toyota aqua?thanks

Hi i have a 2014 aqua, seems systems are similar. Is it possible to change the radiator coolant without changing the inverter coolant. Are they the same liquid?

I have a 2016 VW Golf MK7 1.8t manual that is getting close to nine years old that has had zero failures so far while running a stage one tune too. No oil usage and even the stock clutch is holding the increased power. I bought the car new for $17,830 including tax and license, so if it blew up today I still made out very well.

I'm curious if the new gens have that bolt for to strap?

What size are your seats?

I have the same engine in my A3 8v1, recently it started smoking and using a lot of oil and fuel, what could be the problem?

Very helpful

how smart ya gotta be to put a pin in the engine stand so the motor doesn't keep spinning when he was trying to break head bolts loose. then using a screwdriver to pry apart the cam carriers from head then again prying the head off block. smh

Great job

Bad work!!!!!!!

I'd like to see a better closeup on how the coolant lines to the intake are attached and routed.

I know this video is 3y old but I have these for my 350z and neither seats slide, would it be binding? And would prying it like you did on the brackets possibly fix my issue?

Really struggling with those rod bolts 😅 I find it easier to break the bolts if you pull towards yourself so you can brace the engine against your body. Especially when on an engine stand with wheels.

You are a life saver, thank you! 😊

Any updates on your oil consumption?

My 2024 has a lifetime warranty, but you have to go to the dealer for oil changes or it’s void of the warranty.

Thank you for the video! FYI it is possible to drain and refill both the engine and inverter coolant without removing plastic underbody panels. I don’t think I had to remove any undercarriage plastic bits. Tried to remove one but one bolt head was very rusted so I just reached from the bottom/top of the car to do it all. It took a bit of contorting and I had to wiggle the engine drain petcock to get it unstuck after 10 years of Ohio winters, but I got it open after some twisting and pulling. I was confused why the engine coolant wasn't draining at first until i realized I didn't open the pressurized metal coolant cap. Instead of removing the coolant reservoir hose, I used a hand pump to empty the reservoir. The coolant I used was Walmart Super Tech OE Red Antifreeze Prediluted 50/50, $11.83/gallon.

Video started great you were describing what you were doing then ya just went into a montage of removal and 80’s porn music. I don’t know what I’m doing brother lol need the description and any helpful hints along the way

Is it still up for tighter and down for looser on the other side of the car? Great vid, btw. Straight to the point and no BS.

Plastic, plastic and more plastic. Therein lies the problem - bean-counter engineering.

Great video! Suggestion... Clean the oil filter tray before removing the oil filter. I wont open the oil filter debate.... but stock will always be better.

Salut pour caler le clage est ce que les piston sont aligner ou bien j'ai problème avec le vilebrequin

I WONDER CAN VAG GROUP DONT RE-ENGINEER THE ENGINES LIKE BEFORE ? All the tsi, tfsi , fsi crap ?

Im going to be doing this install soon, pretty straightforward but how far do you need to jack the hub before torquing the bolts back on?

Thank you for the video. I’m having the same issue but it’s cylinders 2 and 3. But I’m at 300k on my 2016 tsi golf

My 1.8 tsi just lost compression in two cylinders at 182k had absolutely no issues with this car but a o2 sensor. Very sad. Is it worth a rebuild or just throw another engine in it with less then 100k

What size crush washer for the oil drain plug? 17mm? 16mm?

5:54 What were you doing there?!

Listo ya está gracias

To purge the ICE part there is a tap at the radiator level...

Change the oil on time, and you will have no engine failures. I have a passat with the same engine with 174000 miles, and it runs perfec.

There are 2 different Subaru oil filters. The black one that ships on the car from the factory is extremely high quality, but are only in Japan. The Subaru filters in America are blue and are very cheaply made. A lot of Subaru people will import the Japanese filters for this reason.

Why can Volkswagen produce such low quality products. It should be illegal. @Volkswagon

Sir this the same exact story that happened to me. Should I get another engine?

What is the bushing for

Do you have to put a new crush washer on everytime? On my 09 impreza i reused the same washer for years tbh

Thank you for some helpful content. Last time I sent the car to the shop around 100,000 for the transmission fluid chance and it was like $275 dollars. I’m going to do this myself . Anyone here did it and got good results? I’m always scared of damaging the transmission by changing the fluid.

Is that a viable tow strap location and also do you know the torque spec of that bolt for the tow strap?

Did you change the crush washer for transmission fill and drain plug?

how do you know which generation of the 1.8tsi engine you have? is there a VIN on it?

Not very loud, cannot hear the exhuast sound while driving😊

Thank you for the tutorial. Be advised the Amazon link to the transmission fluid in the description is a different type(type-IV) than that specified in the manual and what you appear to use in your video(atf-WS) thanks

What size wrench to get the drain unplugged?

Hey this was a little bit ago but my crank pulley hub is stuck in the crank. Any tips