HOW TO INSTALL ALUMINUM RAIN GUTTERS PROFESSIONALLY ON A HOUSE-A DIY GUIDE

New Updated Version, professionally edited no background noise: • How to Install Gutters...
Learn from a professional installer how to install aluminum rain gutters on a house. We DONOT recommend Gutters from Home Depot or from any local hardware store👍
Professional products COMPLETE SHOPPING LIST BELOW:
DIY'er's(Do It Yourself)
*BUY NOW: Shur Flo Leaf Guard Gutter Protector gutteredge.com/products/gutte...
*Recommended Brackets gutteredge.com/products/speed...
*Gutter Seal for leaking seams gutteredge.com/collections/gu...
*ladder stabilizer for safety amzn.to/3JIWDJR
*5 Gallon Bucket for debris amzn.to/31YKJnS
*Hook for ladder clips to bucket amzn.to/2M0qeBW
*Ladder can be picked up at your local hardware store:)
*Gutter Installation tool set amzn.to/2AYt7fW
*5 inch Inside miter, gutter corner amzn.to/3LLgAlO
*6 inch Inside miter, gutter corner amzn.to/42BtBo2
*5 inch Outside Miter, Gutter Corner amzn.to/3FQyAHP
*6 inch Outside Miter, Gutter Corner amzn.to/3JLvO7N
*End Caps, Right and Left amzn.to/31VWRGh
*Outlets 2 3/4 amzn.to/2p8vcUc
*Extreme Outlets 8" gutteredge.com/products/extre...
*Gutter Edge, No More Stained or Oxidized Gutters gutteredge.com/products/origi...
*Other Gutter related products: gutteredge.com
Not sure how to install gutters properly. Then watch this very informative video on how to install gutters. Learn how to install gutters the way a professional would. (Shopping List below exact details in the video)
Includes a full list of material you will need. Not sure where to purchase the best material? This video shows you not just how to install gutters but where to get the right material and exactly what the right material is!!!!
►EVERYTHING GUTTER SPECIAL!
►Become a professional NOW - tinyurl.com/nb8kpse
►Remember to hit that LIKE button if you enjoyed it :)
►NEW VIDEO EVERY 1st and 15th of the month!
Shopping List for How to Install Aluminum Gutters:
- aluminum gutters and downspouts with assorted fittings and brackets
- GSL sealant,"] used to form watertight seal between gutter and fittings
- aluminum screws"] for fastening together the aluminum parts
- aluminum pipe and elbows,"] used to create drainpipe to carry water away from house
Tools for How to Install Aluminum Gutters:
- crimping tool, used to attach end caps to the ends of gutters
- hacksaw and tin snips, used to cut gutter and downspouts to length
- caulking gun, used to apply GSL sealant
- drill, used to drill holes and drive screws
- pop rivet gun, for riveting together the aluminum parts
- 2 3/4-inch-diameter hole saw, used to cut outlet hole in gutter
- level, used as a straightedge to establish position of the high end of the gutter
- shovel, for digging trench to bury PVC drainpipe if applicable
►My Links:
Homepage: everythinggutter.com
Twitter: / everythingutter
Facebook: / everythinggutter
Tumblr: / everythinggutter
Instagram: / everythinggutter
►If we are not in your area:( Find a Local Gutter Installer, no personal information required. Here you will find a list of every known gutter installer - tinyurl.com/q4zrywl
#howtoinstallguttersonahouse #howtoinstallraingutters #gutterinstallation #guttershomedepot #installgutters #installinggutters #howto #howtoinstallaluminumgutters

[@briandupuis3126]

Best DIY videos I've seen. I'm a landscaper, and it's great seeing other laborers taking pride in their work. Keep up the great work.

[@Akweatherguard]

Great video, I never get tired of watching other installers do gutter, keep it simple, keep it real, but always keep it real simple!

[@Methodical2]

Sweet video. My brother works at a gutter supply warehouse, so he can make sure I get everything I need when the time comes. Thanks for the detailed video.

[@Bryce-rx1fz]

You're a great teacher, sir.

[@Fallen2Dope]

You make it look easy I do handy man services on the side and when I was cleaning a gutter out I ruined one and told the account I would fix it...This helps out a lot Thanks!

[@gr8freediver]

Dude, your video's, tips and instructions are awesome! I'm fixing / installing the gutters on my new home myself and these videos are some of the best i've seen for detail and instruction. Your a good dude for taking the time and effort to share this knowledge. God bless you!

[@Everythinggutter]

Thanks:)

[@haikat4]

Had my first day of work with a professional gutter company today. I was doing some research and watched several videos afterward. The DIY videos left me thinking; these guys have it all wrong! Then I watched professional videos like this one and realize that we did everything correctly lol. Thank you!

[@Everythinggutter]

+haikat4 Thanks for the insight Donald, you have my vote, LOL!

[@shencheung]

best video I have ever watched for installing gutters. even if I do it myself, but it educated me what to watch out for when hiring a professional. Thumbs up!

[@Everythinggutter]

Jenny Cheung I love to hear this Jenny:) it is very inspiring, Jimmy!

[@infiniti2015]

Fantastic and well thought out instructional video. Highly appreciated!

[@sheilathomas8600]

This young man is great at explaining things with gutters very well like this👍🏽

[@oldhamegg]

this was a simple and a really brilliant demo. Thanks.

[@AlexSWorlder]

Awesome video presentation...! Thank you for showing how to install gutter. 👍 👍 👍

[@burtonsingh]

Very helpful information from a great teacher. Thank you.

[@THEVOICEOFTHECHOSENONE]

Fantastic video! Step by step! Thanks for sharing

[@Lgca26]

Very good, so far the best video I have seen, thank you for taking The time to explain it carefully step-by-step and not just telling us how easy it is, thanks.

[@Everythinggutter]

Thanks thats very inspiring:)

[@roymartinez8135]

this is by far the best video on KZbin, I appreciate the information. I'm thinking on quit my job to be an entrepreneur and maybe in the future gutters will be a great chance to make a living. God bless

[@Everythinggutter]

Hi Roy, Love to hear it, subscribe to keep up with all our informational video's. I truly hope whatever you decide you have the best success, God bless, Jimmy:)

[@waynemcneely3249]

Great video. You were very explanatory, a real pro. Just a suggestion. Lose the background music or tune it way down. It tended to be disruptive.

[@Everythinggutter]

+Wayne Mcneely Yes:(, we have fixed this! All of our most recent videos either have no music or are turned all they way down, thanks for the feedback:)

[@agsblessings2005]

You explain with details. Thanx, I believe I can do it. I'm thinking about adding gutters to my 1979 mobile home. Angel

[@Everythinggutter]

+Angel Rivera Great love to hear it:)

[@samtradder7590]

Absolutely fantastic, thank you very much.

[@skilltpa]

Excellent description of "How To" I seen thus far. I'm confident I can do it myself and not spend the 3000 I was quoted to gutter my new home. Awesome job!!!

[@Everythinggutter]

Sounds great, We love to hear this!!!!

[@mattbaker3654]

Awesome video ! Very professional ! Thanx man

[@r1Enthusiast]

thank you. Super easy, all details included and very informative. I will be doing this job this weekend

[@Everythinggutter]

r1Enthusiast Great we love to here this;) Don't forget to watch How to Install Gutter PART 2:) Yes there is a part 2 coming soon. It has been filmed as of 3/30/2015 currently being edited, will be posted shortly. In this video we will address some of the questions that we have been receiving threw our comments and email, Thanks Jimmy

[@750RanchRoad]

Man! You must have your own TV show. Your words flow nicely with a clear explanation. Nice camera work. Nice production setup. Thanks.

[@Everythinggutter]

+Mauricio Bolanos Just signed,LOL!

[@michaelcaisse6640]

Excellent video! Straight forward to the point clear explanation. Nice job.

[@Everythinggutter]

Thanks:)

[@terryjones1638]

Thanks! Great video!

[@EugenBurianov]

Great video, Thanks!

[@myfight22]

Great video. Thx

[@gregmarch4306]

Great video! Thank you for taking the time and saving me money!

[@Everythinggutter]

Love to hear it, Thanks Jimmy:)

[@kathleenrudeck5227]

very informative and easy to follow

[@Everythinggutter]

Kathleen Rudeck Thanks we love to hear this. If there is anything we can help you with please don't hesitate to contact us for some helpful advice!

[@roofingcompaniesct1930]

Nice job and demo on gutter installation..like your gutter machine and how it extrudes and shapes the coil stock into the actual seamless gutter...way to go...the Hang Fast hangers he used are sweet...

[@Everythinggutter]

Roofing Companies CT Thanks we really appreciate the feedback!

[@roofingcompaniesct1930]

Everything Gutter No problem..

[@sasaevernow]

the flat shape gutter is better then the other shapes? some one knows. that is a great video Thx

[@Mhogies910]

Great video you went over every detail made it easy to understand everthing thanks ! Keep up good videos

[@Everythinggutter]

Mhogies910 We were going for simple:) So the average consumer could do a DIY on there gutters. We searched thrower youtube we could not find any real raw video's. This is what we are trying to accomplish, real raw videos that are easy to follow. So whatever gutter DIY (Do It Yourself) you are looking to complete could be completed properly:)

[@TraceeRae]

very good video, very informative. I feel pretty comfortable trying to in stall gutters now. Good camera work.

[@Everythinggutter]

Tracy Murphree Thanks, love to hear that:) any questions don't hesitate to contact me, Jimmy

[@edubb2491]

..awsome video..awsome truck..Jus got guttets the other day...the down spout opening wasn't sealed with that glue? And my gutters are sloped very noticeably...he says due to the way the house settled..and fescia board is not straight..is this true???

[@oliver915]

Very instructional. Thank you

[@Everythinggutter]

oliver915 Great, I love to hear this, Thanks Jimmy:)

[@JPoleet]

Thanks for sharing this information, very informative.

[@Everythinggutter]

***** your welcome, Love to hear this:)

[@philipcarpenter6718]

That's amazing. If possible could you make a video explain, or better yet showing, the internal workings of that machine. Great video.

[@Everythinggutter]

+Philip Carpenter I will post a video on this shortly!

[@stevecleans]

I love the video. When you put the sealer on the left right and downspout, do you never finger it in place, do you just leave it set right out of the tube how you squeezed it? Does that make sense?

[@jlk63]

Jimmy very good video most on youtube have no idea what they are doing. I've been installing rain gutters full time since 1982. A few pointers for you add an extra crimp or two on each side of you end caps it costs nothing to add more crimps. Jimmy is right Geocel is the best gutter sealer out there.

[@Everythinggutter]

Thanks for the pointer, could not disagree:)

[@carlbarfield5207]

I agree with JLK, I do 5 crimps, 2 back, 2 bottom, and one front. Vulkem sealent up here in the Pacific North West is the sealant of choice. Guttering since 1989.

[@edubb2491]

@@carlbarfield5207 thats what the sealent is called..thank you! Jus got gutters here in the PNW! And wanted to know...i noticed my down spout openings where not sealed with this stuff..just ends and corners? Do i call him back to get sealed?

[@joshuahurley5910]

Great video. I think I'll do it myself and save the money.

[@Everythinggutter]

Joshua Hurley Great love to hear this:)

[@billmitchell5805]

Do you connect the gutter through the brackets and into the fascia boards only or try and hit the rafters as well to add strength?

[@richardrodriguez1835]

great info, but two questions. if you are running a long gutter, with downspouts at each end, how do you slope the gutter to each spout? secondly, with a gutter section that connects to an inside miter, that connects to a longer section with a down spout, how do you set up the proper slope so both sections drain to the down spout?

[@lmd6204]

I have one question; how to determine which size gutters you need. Thanks for posting this awesome video! I am a DIY'er, but never installed gutters, so this really helps!!

[@Everythinggutter]

Great question, Check out the below video:) kzbin.info/www/bejne/nIvQYnaYrpmBr5o&lc

[@stevekopcial129]

Great video, I am seeing droplets of water that are forming on the front bottom of the gutter, water is dripping down the front face of the gutter and forming droplets, have you ever seen this before? Any ideas why? I have installed the plastic cap and have droplets dripping off of the cap to the ground. I have never had a issue like this.. Thanks

[@XInfantryman]

Good video, Thanks

[@Everythinggutter]

david stout :)

[@RoNa8998]

thank you!.

[@Everythinggutter]

Rcnages :)

[@SuchaCaligrrl]

Question, I noticed that you installed the gutter up close to the edge of the roof, noticed you didn't take into consideration snow build up/snow fall off... would that not be an issue?

[@chrisgraham2904]

When my gutter go up, I don't want to think about the for the next 20 years, other than annual cleaning of leaves and debris. Is it not a good practice to apply the sealant to the downspout outlet flange and the end cap recess seam before assembling them to the gutter run? Second application of sealant is applied to the same seams after the assembly is completed. One extra tube of gutter sealant to do a whole house is pretty cheap insurance.

[@YakJones]

you are the man thanks!!!

[@Everythinggutter]

josh butler I hope it has helped, thanks for watching:)

[@marciaz31]

good job ..

[@Everythinggutter]

+Mark Cam - Thanks!

[@carlbarfield5207]

Pretty good video. Very informative, fairly detailed, just a couple of steps would have made it quicker or easier. One is, put the end cap on before running it 17 feet away from you.

[@ranmangolf]

Are the hang fast hangers secured on the fascia board only, or do you have to hang them on the rafter which are unseen? What area do you operate out of?

[@husseinhashim2433]

thanks its good video

[@Everythinggutter]

Hussein Hashim :)

[@genesis80247]

thank you for you video it really help me i want to start my own gutter company can you give some advice please

[@Everythinggutter]

pancho torres Have questions on starting your own gutter business send me over an email with detailed questions, I will get you a response. I might even post a video, Thanks Jimmy:)

[@jerrywhite3095]

Jimmy, do the hangar screws have to be screwed in to the rafters?

[@daniellemesserschmidt9196]

How do I install the gutter hangers if my shingles and drip edge are in the way? Iv tried pulling them up by hand but I don't want to break my roofing material.

[@ndk8111]

Thanks a lot for the tips - appreciated. Suggestions: music is ok at the beginning, end or transitions not during the presentation please. Wished you ended the video by screwing few more pieces. Do u use the level at all? Would following screws be next to the ones you just screwed in or at the very opposite end?. Gutter drain hole end and the distance from the edge should have been carefully considered based on the roof design prior to drilling? What if you need elbows or awkward spot to pore water at the ground. Cheers.

[@Matt-tw5ne]

excellent video. well thought out and put together. thanks for your help.

[@Everythinggutter]

Matt Kowalewski We love to hear this thanks for the comment!

[@mikerose1112]

Do you go under drip edge with gutter or does it go against drip edge?

[@Ahill208]

Thanks Jimmy that's awesome, but can you create a video for the gutter that hangs in 2 directions. In other words along the garage and then the corner piece that runs along the porch. Hope you understand what I mean.

[@Everythinggutter]

Allen Hill I am not sure exactly what you mean. I recommend subscribing to our channel as we post new videos every week:)

[@tankerman4916]

Like the way you explained everything in detail. I would like to know what is needed for 6" gutters.(material wise) and tool wise.I have (2) runs of 40' & (2) runs of 21 'plus 52' of downspouts.I live in Cincinnati,don't know of any shop and drop for gutters. I see you are located in the north-east,don't guess you have any stores in Ohio. Again great job on the Vid.

[@Everythinggutter]

All material and tools will practically be the same for 6" size gutters. First all the material will be 6" in size - end caps,gutter,hangers etc.... The gutters are installed the same way stated in this video and the same tools are used. The only one difference besides the size is the downspouts. You will have to use the larger 3x4 size downspouts and larger outlets. I recommend for homeowners to use the 3 3/8" pop in outlets for easy installation of the 3x4 downspouts. So you will need to pick up a 3 3/8" hole saw. For any of your material just contact any local building supply store witch can be found online or in your local phone book. Note: If they sell roofing shingles/supplies they will have all the material you need for your DIY gutter installation!!! With the funds you will save doing a DIY we also recommend you install gutteredge.com to eliminate the gutter from staining and if you need a gutter guard shurflowgutter.com visit here for a DIY gutter guard kit or purchase any aluminum perforated gutter guard. This type of gutter guard is the recommended choice for affordability and ease on maintenance. Hope this helps, Thanks Jimmy

[@lastniceguy1]

What gauge aluminum do you recommend for the gutters? In So Cal, average 15"' rain a year and 1/2-1 inch max at a time. 10-12 pitch? I have watched a lot of videos on gutters and yours are by far the best and most professional. You are the only one that explained how drip edge is done to compensate for drop. Excellent!

[@Everythinggutter]

I usually recommend .027 gauge anything over that is usually installed as a sales tactic. If installed correctly with the proper amount of hangers there should be no issue's. The other option is to go with the thickest which is .032. I prefer .027 less wasteful with the same results:) Gutter gauge .027 and .032 are both considered a quality heavy duty gauge aluminum. Also note the average gauge at your local hardware store gutters are approximately .010.

[@lastniceguy1]

Gr8 info. Thank you!

[@fujiobass]

what downspout will be installed on this round outlet ? and how ?

[@charlesbakes2855]

Could you please tell me how you like your gloves that you wear and where you purchase them and how much do they cost. Thank you very much Charlie

[@Everythinggutter]

+Charles Bakes the gloves are great:) they can be purchased online I prefer Amazon. Pricing varies, whatever the cost its worth every penny!

[@makechange5452]

Good video over all. However do have some comments. Please correct me if I am wrong on any of them. To start I do believe there is a standard on the slope. I was taught half an inch for every 10 feet of length. Another thing I like to add the rubber sealant to the caps before installation. You get a seal both ways. I am just OCD and want to insure a good seal. The last thing I would also advise is the placement of the gutter. I always place a straight edge on the roof letting it over hang. Then bring the gutter up to where the outer edge of the gutter just touches the straight edge. Then I would mark the spot and mark a chalk line to the other end. This helps keep the slope correct. The reason to hang them like this is. Is in areas with snow fall. If the gutter is mounted to high. Ice or snow can and will slide down the roof and if it catches the edge of that gutter. It can rip it off. If not cause damage that will lead to a repair.

[@bradlewis8200]

Agreed!

[@natgasf4097]

I also agree

[@edubb2491]

Make change..jis got gutters the other day i dont think my downspouts are sealed...do i call back and have them sealed? Will they leak?

[@chrisgraham2904]

You are correct! These are all important installation factors, especially in northern climates. I will also add that gutter hanger placement or spacing should always be determined by the spacing of the rafter tails. At least hit the every second or third rafter tail, if not every one, wherever possible to insure the gutters stay put and properly aligned. Don't rely on attachment to the facia boards, particularly on older homes. Attachment through the rafter tail attaches the gutter and re-secures the facia. A 10 foot gutter length of 5" gutter filled with ice can weigh 50 to 60 pounds. A 50 foot run could hold 300 pounds of ice, the equivalent of a fat man hanging from your gutters.

[@katfranzoni2219]

nice vid was wondering are those mounting clips better than the big gutter screw through the face ,they def look better but what about installing the black foam gutter guard inserts, looks like they are going to be all in the way? Is it mainly personal preference .

[@Everythinggutter]

+Kat Franzoni The type of hanger in the video id currently the best out there. They can be purchased from a direct supplier for a DIY "Amazon" or from a professional gutter installer. The hangers found at your local hardware stores like Home Depot or Lowes will NOT work. The black foam gutter guard is not recommended. Best way to look at that type of gutter guard is think of a fish filter. Last it's Not personal preference, recommended to use the right or I should say the professional quality material to complete the job correctly and that it will last as it should:)

[@edubb2491]

@@Everythinggutter can u put a fish filter at the down spout opening to block debri from going down?

[@kennybyler607]

The first video of somebody doing gutters that knows what he's talking about except we use hangtite hangars cause they're a little stronger.

[@340rps]

Why not use larger downspout hole to help keep from getting clogs?

[@jerrywhite3095]

Nice video! When you attached the gutter, do you screw the gutter to the trusts or just the facial board?

[@edubb2491]

Most likely fescia board..mine was..got gutters the other day...notice to many hangers on..and not enough rafters..so iam guesing mostly fescia!

[@BH-hx5ij]

Thanks, this was helpful. It was a little tough to hear you at times with the music, though.

[@Everythinggutter]

Bruce Holmstrom Thanks for the feedback we have updated for future videos:)

[@AnotherOverTaxedTaxPayer]

Good video. Where you work, does it snow and if so, do people use snow guards?

[@Everythinggutter]

+Harley Rider Yes and Snow guards are used especially on half round gutters. There are three main reasons to use snow guards metal roof, half round gutters and a roof that has solar panels installed!

[@perecarl12]

How would you install gutters on a home with hip roofs?

[@rhdtv2002]

Nice video man. My gutter is falling but the gutter looks t be anchored with something that wraps around and many be under the shingle it gets nailed. I think I'm going to use the one you show here. Btw you look like a kid until you start to talk - not meaning to disrespect.

[@pablotrejo6425]

hi jimmy excellent video ,I have a question,,,do you have a generator to connect the seamless gutters machine ? or where do you get the power for the machine thank you

[@Everythinggutter]

Most times we will get the power needed from the job. We don't use a generator we use a high powered inverter. Any electrical shop can install this. Tip, always check with your gutter machine manufacturer because the machine will list its amps need to run that is low, the amp draw to get the machine started is EXTREMELY high for most machines.

[@edubb2491]

The contractor used my outside outlets? When u say you get power from the job..u mean from the customer?

[@AndyWilliams22]

Good video. Music is too loud though. Thanks.

[@davidghere4394]

Thank you for the videos! We are looking to install gutters on the back side of the house. There is a place where the roof line travels horizontally, but then it makes a 30 degree angles run for about 1.5 to 2 feet, then runs horizontal again. What is the best way to accomplish this? I was thinking of using a 5 inch seamer and using screws and geocel at each joint where the angles change.

[@Everythinggutter]

All you will need is a bay miter that can be purchased from your local building supplier:)

[@davidghere4394]

+Everything Gutter I don't think that is the fix to mine. I have pictures I can message to you.

[@Everythinggutter]

Great send them over with better details:)

[@ericrodgers1723]

Video on slicks and tabs?

[@RoNa8998]

Jimmy, first off, Great video! I am going to assume you shoved the gutter up under the drip guard? Thanks Rob

[@Everythinggutter]

Rcnages Correct:) Note, sometimes at the downspout end the gutter won't always make it behind the drip edge. If that is the case, make sure the drip edge is bent out past the back edge of the gutter. This will eliminate water from going behind the gutter:) Drip edge purpose- It's there only to divert the water from the edge of the roof into the gutter, to eliminate water from going behind the gutter!

[@Everythinggutter]

+Rcnages Watch this short video on a drip edge or as you call it a drip guard:) kzbin.info/www/bejne/qV6XmYtnm9uMj5I

[@lewistrowbridge3300]

But if u pull the drip edge up a little the gutter will go under the whole thing an why in god's name is Jimmy using that caulk an not a caulk gun he has a good video

[@shanewilson8648]

What about inside and outside corners?

[@lschoon]

Do you have a video showing the miter cut on aluminum gutters?

[@Everythinggutter]

Larry Schoonover Currently we do not have a video showing a miter installation. I have added it to the list of gutter installation tutorial's. Will be added soon, Thanks!

[@ATXTube]

Great explanation

[@michaelleyden6750]

Should I lower the gutter a bit to allow for ice and snow to run off without hitting the gutter and ripping it off?

[@Everythinggutter]

The gutter will never be lowered to avoid snow and ice. Two things, make sure the gutters are properly maintained another pointer is you could possible have snow guards installed to prevent the snow and ice from sliding. If you are experiencing anything other then normal function at any time of the year I would recommend having the gutters fully evaluated and water tested!

[@buckaroobonzai8646]

NIce, but would help if you lowered the volume of the music so we can hear you speak.

[@Everythinggutter]

New Updated Version, professionally edited no background noise: kzbin.info/www/bejne/bIHWf5yHg6d-gM0

[@AndresGonzalez-yo4py]

Do you work in the Area of Orlando Florida? If not do you have a good recommendation of someone that does that area

[@Everythinggutter]

Andres Gonzalez unfortunately not😞, We created a website for anyone not in our service area, just visit seamlessgutterstoday.com

[@RedfishInc]

I have a 76' straight run, obviously a seamless piece would be incredibly unwieldy to move, hang, handle. What would be your recommendation for a minimum/maximum piece length?

[@Everythinggutter]

The limit would be the coil, a 76' seamless gutter can easily be installed with the right installer. Recommend one guy for every 30' 3-4 guys can easily hang that span of gutter, hope that helps, Thanks Jimmy:)

[@Ilanawolf12]

NO! A 76 foot gutter will probably fail where there is any type of temperature change. Aluminum stretches and shrinks.

[@CP-nf9my]

Wish you would take the camera and show the inside of the gutter while you're putting in the screws.

[@tomaud]

Is it okay to attach (screw to) the gutter to the clay tile (the last row that sticks out too much)?

[@Everythinggutter]

Au Tom The gutters need to be for this roofing type attached to either the facia or rafter beams. If you have neither you will need to contact a local gutter professional this might need to be visually inspected. Note: A larger gutter might be needed. If you find you are stuck and need a more detailed solution please email me a video or some pictures!!!

[@steele829]

What about putting gutter where the long run dead ends into a valley

[@Everythinggutter]

steele829 This question is covered in are how to install a miter:)

[@fudgedogbannana]

Don't you have to put the gutter under the drip cap? I know that if you have a really long run that one end will hang below the drip cap, so you have to start on the high end as far up the back of the drip cap as possible.

[@kam75]

the real deal....

[@davidclampitt9529]

What gauge metal are these gutters? My roof has a metal L flange which runs under edge of roof shingles and hangs down 2" okay to mount gutter under this?

[@Everythinggutter]

This installation was customer requested .032. Either o.32 or .027 gauge is recommended, nothing less then that. Either one is considered a heavy gauge with a small difference of .005. The L flange would be the drip edge, yes the gutter can be mounted below the drip edge. Keeping in mind the only purpose of the drip edge is to divert the water into the gutter inturn eliminating the water from going behind the gutter.

[@mrdshouseofpain77]

I just had a new metal roof installed on my home. It rained over this past weekend and i noticed that rain is now clearing my gutter system and running right to the ground. Any tips on how to solve this problem. Looks to be a 5" gutter in place now and as i look at the roofline the gutter looks like it doesnt stand far enough away from the roof to actually catch the rain.

[@Everythinggutter]

You will have to use a roof strap to mount the gutter. You need at minimal 3inches from the edge of the roof to the front edge of the gutter. I would recommend in this case to contact several local gutter installers in your area for a professional fix. If you are determined to do a DIY(Do to Yourself) I would contact a local building supplier to purchase the correct hangers to rehang the gutter correctly!

[@mrdshouseofpain77]

Thanks for the reply! I am having the gutter system moved up by pros. :)

[@claudiaveitch6006]

Our gutters have never worked properly. Installed by our builder. Want to make sure corrected properly. Example: back of house 50"', straight line, one down spout at left corner, downspout on right around corner. Water has always poured over top of gutters all along length. So, need another downspout, need to raise in middle? What is solution? Thanks.

[@Everythinggutter]

It is recommended one downspout for every 25-30' of gutter. I have seen 50' runs with one downspout with no drainage issue's. I would recommend simply water testing the gutter with a hose to narrow down the exact issue. Thinking a constant clogging issue or an alignment issue, water test to verify:)

[@bobdragoo736]

Now that I'm ready to hang my two ten-foot sections of gutter with a slight decline to the downspout, I'm having trouble fitting the back edge of the gutter under the drip strip at this decline with the hangers attached. There doesn't seem to be any room to allow for the slope. What am I missing? thx

[@Everythinggutter]

Bob Dragoo Sometimes the drip edge will have to be cut to allow this!

[@Paul-uj2dh]

You can also bend drip up with your hands

[@Paul-uj2dh]

THE WAY YOU SAY .."downspout" though. When my girlfriend is around sometimes I actually mock your "downspout" pronunciation..we laugh.

[@suljoduric7669]

am I allowed to share this videos on my friends gutter company

[@Everythinggutter]

yes:)

[@booAHHHH]

Suljo Duric no

[@jeremybushey7671]

Do you use a level when hanging the gutter

[@Everythinggutter]

Using a level is the surest and easiest way to hang a gutter properly. So a level is recommended!

[@billmitchell5805]

Why do you not put caulk inside the end caps prior to installing on the ends. Keep the caulk out of the gutter.

[@edubb2491]

I dont get your comment?

[@lastniceguy1]

What is the longest run for a single end downspout? I've seen 40 max to 60 ft.

[@Everythinggutter]

It is recommended every 25-30' a downspout be placed. I have also seen 60' runs with one downspout with no issue's. Basically it depends on the situation like the size of the roof and is the gutter located near trees were clogging will be an issue. Bottom line try and go with the recommended option if not able keep in mind a downspout can always be added at a later time if needed.

[@lastniceguy1]

Thank you for your fast response LOL never thought about another can be added later. That alone made it worth watching your videos!!

[@tassaman2]

rather than making a circular cut for the down spout, can you do a video where by u make a cut on the gutter and flare out the gutter and slide the down spout in the gutter, with out using an outlet

[@Everythinggutter]

Cutting the gutter to make an outlet is not recommended for a DIY this takes some skill with the snips. Any DIY installation we recommend using a hole saw for a precise cut then installing a pop-in outlet as noted in the video! We appreciate the video recommendation. We have added it to my list of videos to make. Subscribe to our channel to be notified of our newest episodes, Thanks Jimmy

[@tassaman2]

hey kool thanks man...besafe keep up the videos stay blessed my friend, coming all the way from the caribbean...:D