How to Install an OE Puck SuperGlide Hitch

Trucks equipped with OE Puck Mounting systems direct from the factory are the latest buzz in the RV industry today. The draw of these trucks is they leave you with a clean bed when you're not towing and also allows you to switch between fifth wheel towing and gooseneck towing.
So why choose PullRite over another brand? Because we are the only fully, automatically sliding fifth wheel hitch for OE Puck Systems. You get all the great features and ease of use we pack into every SuperGlide, the only difference is the way it mounts to your vehicle.
To see our entire line of OE Puck Series SuperGlides, visit www.pullrite.c...
To learn more about how SuperGlide hitches work, click: www.pullrite.c...
PullRite is the industry leader in fifth wheel hitches and accessories. We have a hitch for nearly every type of short and long bed trucks with OE Puck, Single Point Attachment / Gooseneck or Rail Mounted systems. Our fifth wheel hitches are 100% made in the USA and SAE J2638 tested.
www.pullrite.com
www.pullrite.c...
Customer Service: (800) 443-2

[@ibrewalot]

Great instructions...I just installed mine "without a hitch"! 🙂 Thanx for the help.

[@jasonfranza5461]

Thanks for doing this video as I am getting ready to order part number 2915 (OE GM/Chevy solution). The installation looks like a breeze!

[@timquist8437]

Absolutely love this hitch. 2020 Ram 3500 short.

[@dennis12345]

Nice video

[@marksleeper3752]

thanks

[@markfinklestein4139]

When will this adapter be available for a 2020 GMC 2500 AT4 Standard bed?

[@larksanders180]

Why #5 hole vs any other?

[@tonyames821]

When rotating the lock handles to lock pin, the handles seem too long (have to force inside lock tab with hammer). They'll go in but need some force, is this correct/acceptable)? Thanks.

[@saulm.3515]

I will like to buy that adapter plates for my 2700 superglide,but I'm wondering how high does it sit from the floor to the to off the hitch plate

[@VP23]

Can this be mounted without the brass washers

[@Propnut48]

One thing I see that I REALLY don’t like is the 4 pins that cam into the bed puck holes only have a small pin that essentially hold the entire system in. I wouldn’t trust that system at all. That is partly why I have the ISR setup. Even on the super lite setup where only the goose ball is the main attaching point with 2 small pins the hold the gooseball in , I would not trust it either.

[@roguetrooper70]

What about if you already have a Pullrite but you buy a new vehicle with the pucks, 2021 Ford F250 and want to keep it low profile because of hard folding box cover.

[@mikem8475]

Gotta buy the 4442 brackets which are 731.00

[@wrightsj617]

I’m installing a 4500 model, even with the castle nut all the way down there isn’t much resistance turning the handle (the other 3 are fine)… I guess it is ok to add grade 8 washers to give more adjustment or is something else wrong?

[@PullRiteVideo]

Please call Customer Service at 800-443-2307 and they will be glad to help you!

[@charlesadewale7745]

Will this mount on standard 2015 ram 3500 short bed/mega cab

[@marksleeper3752]

nice what is the cost of the adapter hardware

[@nickthehitchguy7648]

Hi Mark! If you are looking to upfit your industry standard Superglide in order to make it an OE mounted hitch, please give our customer service a call at (800) 443- 2307. They can make sure your hitch is compatible and will have exact pricing information. Thanks for inquiring! Nick Moreland

[@larksanders180]

Mine just cost $700.00

[@geraldbrown8253]

Hi Mark Will this kit work with super glide #2900?

[@snookrookie]

Will this work on my nissan xd?

[@michaelpeterson3916]

Yes I currently have a 2500 short bed dodge ram. But I’m looking at going to the 3500 with an 8ft bed. Will I still be able to use my sliding hitch with 8 foot bed? And can you use it without the capture plate?