How to install Apple carplay android auto in Mazda 2 | Mazda 2 carplay installation | Mazda 2 |

[@kevinwu7]

You did a great job!Bought a carplay online but there's no instruction at all,you saved mebro!

[@fastquickaudio5890]

Glad I could help!

[@NL-SanderH89]

I used this howto to install carplay in my mazda today, it works like a charm. However, i found that you don’t have to remove the horizontal strip on the dashboard, i still did it, but it wasn’t needed. I just took out the glovebox, bundled the cables behind it, and could reach both the radio and the carplay unit from there. Thank you for this detailed howto

[@bobbymike]

Great vid my mate best one for Mazda 2 out there, 😊

[@Loukisi90]

Would this mod enable a japanese car have access to full range of FM stations? Because at the moment the range is limited to the Japanese band.

[@fastquickaudio5890]

Updating Software or installing apple carplay does not change FM frequencies. You need a FM band expander. That unit is located under dash near steering wheel. Very easy to install.

[@joshkiej6601]

I'm planning on doing this to my gf's car, she just bought it so im unsure of the firmware update, but if it not up to date, i can just take it to a dealer and get it updated right? is it a special version of the software or just the stock MZD software but a more recent version?

[@fastquickaudio5890]

Hi Josh, software should be 7.0 or up before you install hardware. and yes you can get it updated from dealer. cheers

[@stephanburrows924]

where is the radio antenna located for these cars?

[@fastquickaudio5890]

driver side kick panel.

[@arielcodilla2361]

Is it work on my mazda 2 2016 os version 56.000.230 4AN? or it needs to upgrade?

[@fastquickaudio5890]

Hi Ariel codilla, Yes It needs an update before you install this product. Thanks

[@Josh-zc8vn]

@@fastquickaudio5890 do you have the file you could send over for the 70.00.100 UK please

[@taliapeake8928]

Hello, I have a Mazda 2 Maxx 2015 would this still work?

[@fastquickaudio5890]

If your vehicle display looks like this then yes it will work. Please make sure software is up to date to avoid any damage.

[@XilakaCS]

Where can i get a new software update ? My current version is 59.00.504 EU N

[@fastquickaudio5890]

you can talk to the supplier from you are going purchase carplay module

[@ngunandikayogaputra58]

My mazda 2 skyactiv headunit stuck on logo, But the radio and camera still normal. How to solve this problem ? Thanks

[@fastquickaudio5890]

You can try to hard reset. Information available on google. How to do hard reset in mazda using 3 buttons.

[@renaegelissen2058]

hello, how do i install the 70 version i only have the old one

[@mel-vq1ez]

i need an answer too i want to upgrade mine so bad

[@fastbysuzukiwyre8940]

Hi is this car a uk model where did you get the firmware update please?

[@fastquickaudio5890]

This vehicle is in New Zealand.

[@Ju1ian10001]

Hello i have a 2019 Mazda 2, already have the twin USB sockets, do i still need a new device or can i just update the software, and where do i get the software update (i am in the UK)

[@fastquickaudio5890]

Yes you still need a new device and software. Do software before installation of device. what's the current software version?

[@Ju1ian10001]

@@fastquickaudio5890 Software version is 70.000.367 EU N

[@fastquickaudio5890]

@@Ju1ian10001 You don't need a software, buy device only and install. That's it

[@LuukvandenBorn]

hello, I have version 74.00.311 EU N do I need a software up or downgrade?

[@Tylerrrr94]

You are the most up to date already. Perfect for CarPlay or Android Auto, if you don’t already have them on the Mazda you just need the new Hardware installed.

[@fastquickaudio5890]

Only need a Hardware for your vehicle.

[@nelsonpaden8939]

Can you change firmware from japan mazda demio to new zealand firmware?

[@fastquickaudio5890]

I can do English version, but it doesn't have NZ version. New software is faster than old one. you can contact me on [e-mail]

[@peternanatweneboa-kodua5858]

How do I get the device to purchase

[@fastquickaudio5890]

Hi Peter, You can find it on Amazon. search for mazda carplay. one device for all Mazda's.

[@mathursaabvlog]

👍👍

[@Pedro15SK]

Good afternoon and sorry for my English, my Mazda 2 has the seat belt warning light on top of the radio, is there a problem if I leave that light off? Thank you

[@fastquickaudio5890]

No problem

[@DeadDooD54]

😂 Why would you take your car apart like this. No instructions. Good luck putting it back together. My advice get an electrician to do it.

[@fastquickaudio5890]

Thanks for the tips!

[@johngarciar4351]

Lol I Just did this myself following the video took an hour . Wasn’t hard at all

[@apox5308]

😂you don’t need to be an electrician to do this. It’s just taking apart some upholstery and connecting a few cables! My 6 year old daughter helped me with it lol.

[@fastquickaudio5890]

true , It's easy to do. @@apox5308