How To Install Brompton's Rear Rack (English)

[@ksiriphong]

อธิบายได้ละเอียดดีครับ ถ้ามีช่างกล้องจับภาพใกล้ๆ ตรงจุดที่กำลังทำอยู่จะยิ่งออกมาน่าดูกว่านี้อีกครับ 😁

[@TinyWheelsTH]

ขอบคุณครับ จะพยะยามพัฒนาครับ

[@chriswong2012]

After a bike clash, my rack was blent that the right rear wheel never able to reach the ground again. Like on I found the one of screw connecting the rear rack leg is losen. Is that possible to blent it back to a normal condition? Thanks a lot!

[@TinyWheelsTH]

You can try. But the rack is made from aluminium not steel and aluminium doesn't bend as well

[@songsuyoap]

it look like your brake pad is further away from the wheel, because I see your brake can move than is good not too close to wheel. And your are wearing brompton shirt are you brompton bike mechanic, you don't mind me asking

[@TinyWheelsTH]

No just our bike shop shirt.

[@glee7224]

May I know how to view all the tools required? Is it listed? Thanks.

[@TinyWheelsTH]

Tools Required 2X 8 mm wrench 10 mm wrench 15 mm wrench

[@roslee7]

Can i buy mini rack or the cheaper one like at aliexpress? My brompton is the L type and one of the dealers told me that in order to push it like a luggage bag forward or backward, u need a rear rack. is that true?

[@TinyWheelsTH]

yes that is true... The mini rack will work but the bike will not be as stable and the rear triangle can collapse damaging the rear suspension...

[@roslee7]

@@TinyWheelsTH My brompton is M6L model, and can i install an extender and change to bigger and better wheels ? and also change the mudguard wheels to double wheels to make it move just like a luggage bag?

[@TinyWheelsTH]

@@roslee7 No mini rack is much better in our experience than an extender and new mudguard wheel.

[@gerrymein5282]

will you make a video showing how to reinstall the rear derailleur?

[@TinyWheelsTH]

This One is more Detailed with Regards to Installing the Derailleur and the hub Gear Pin! kzbin.info/www/bejne/a4XNdHmJbLdsp8k Hope it helps PS The Sound is not as good as the newer video though

[@gerrymein5282]

@@TinyWheelsTH cool can you also show how to install pusher assembly wire on the rear frame when it pushes the chain from high to low gears. That's so hard to do

[@auger888]

there are no instructions on how to attach the rack to the blade which you have also skipped

[@TinyWheelsTH]

Oh yes you are right... Sorry about that. Will re upload the video in the future.

[@Hyunny...]

You skipped way too many steps. Wish you'd just walk through every detail.

[@TinyWheelsTH]

Thanks for the comment. We will try to make a better one for the P-Line =D