How To Install CROWN MOLDING using a SAWSET PROTRACTOR.

[@tomshieldsmith9687]

Watched 4 videos before I found this one. Could've saved myself half an hour if I found this first! Very helpful. Thanks!

[@SawsetTools]

Thanks. Glad to be helpful.

[@DanielRundkvist]

The polite and humble Canadian..... :) Good job. thank you

[@SawsetTools]

Born and raised. Thanks

[@sbtencar8243]

Very great tutorial i found, i need to tell my husband to watch this video so we will try to do our house crown molding. Jordan , thank u for sharing this video

[@SawsetTools]

Glad it's helpful. Thanks

[@deldeek]

Yet straight to the point i didn’t see and explanation how you placed the crown on the miter what side for which ( left or right ) , from which point to what point you measure the molding ! That’s where the struggle is ...besides that thanks for sharing

[@SawsetTools]

Sorry. Limited time.

[@cassiellightman]

One of the best videos teaching how to cut crown molding. Thank you!

[@SawsetTools]

Thanks for the compliment.

[@spicyhot1695]

I wish I had seen this video 5 years ago when I installed my crown molding, it would have made the job a lot easier. Great video. Thanks for sharing

[@SawsetTools]

Thanks for your comment.

[@maureenmellegers6582]

Great video on installing crown molding.

[@SawsetTools]

Thank, Moe

[@u.sonomabeach6528]

Thought I was gonna be surfing videos for hours but your video had me back working quick. Thank you for being competent, clear and concise! One thing I will say though is there IS one person who wants to be called stumpy….Stumpy Nubs Woodworking channel 😉

[@SawsetTools]

I love Stumpy Nubs!

[@SawsetTools]

Thanks for the compliment.

[@ScubaDiverMagazine]

Took ages to find a decent video like this. Thanks.

[@SawsetTools]

Hi to the UK. Thanks for taking the time to comment. Glad the video was helpful.

[@toreyyoung1518]

#1 you are very informative. #2 great detail #3 I had long hair for Years. Ponytails men & women. Buns...female ballet dancing.

[@SawsetTools]

Thanks for your positive feedback!

[@mrdman094081]

Agreed. You make it look easy and uncomplicated, the opposite of what it is. That's a skill.

[@SawsetTools]

Thanks, years of repetition.

[@salompita]

You make it look so easy but at the end it’s beautiful

[@SawsetTools]

Thank you for your nice comment Jenie.

[@bennyholguin7032]

Thank You for the video. It was Very Informative! You made it look EASY!

[@thetoolman3355]

Thanks Ben for the Compliment.

[@PerfectPicture2012]

What a great detailed video, good job on molding and video!

[@SawsetTools]

Thanks for the compliment.

[@luisbanda7063]

THANK YOU , WONDERFUL TIPS ON THIS VIDEO !!!

[@SawsetTools]

Thanks for your compliment.

[@jewelsbaby2449]

🙌🙌🙌 great job!👍🏽

[@SawsetTools]

Thanks, Glad you liked it.

[@DiannaAtherton]

Finally a video on crown I understand. I was so confused about turning crown inside down before cutting. Thank you. Can you share what glue your used? Thanks

[@SawsetTools]

We use Lepage No More Nails for gluing, and Dap WATER base calking for the final part. But any WATER base glue that comes in a calking tube works. Thanks for your positive comment.

[@alaverga3455]

Make it look so easy, this guy is a pro and is very skilled👍

[@SawsetTools]

Thanks, I do it for a living.

[@U2BER2012]

Say...you're pretty good. I like this video; simple yet very insightful!

[@SawsetTools]

Thanks, I try my best.

[@patrickmayer9566]

Mr,jordan,,,thanks for this vid,I used this on my new job,just starting,you showed me just what I needed!simple,to the point,can't wait to have a nail gun!old school😐..also how to glue and clean up!!!!a plus...land o ' lakes,wi.usa.

[@SawsetTools]

Thanks Patrick! Good luck on your project.

[@bartonchu670]

Jordan, Great video explaining how easy this protractor is to use and how accurate it can be. Well worth the $20+ and it is so compact for storage. Works simply with the T-bevel you likely already have. Your instructions on applying latex caulking to all joints and surfaces before installing the molding to ceiling and wall was so helpful to successful completing our room. When installing long pieces it is like a 3rd hand holding the molding in place while you position and nail. Super suggestion and a great help to ensure the piece is permanently held in place.

[@thetoolman3355]

Barton thanks for the compliment. Merry Christmas

[@SawsetTools]

Thank you for your positive feedback. It's so great to hear success stories and how Sawset and our videos have helped you improve your carpentry skills. That's our goal!

[@PVTOW]

Awesome Video !!

[@SawsetTools]

Thanks!

[@moisesrobles7884]

Nice work bro and tips thanks keep it up lm smashing my like botton katakabooooooooooooom

[@SawsetTools]

Thanks. Love that expression.

[@cloudflores9838]

Oh wow this video was fun, easy and very informative to watch! Thanks man

[@SawsetTools]

Thanks for your positive comment.

[@carmelojeronimo8497]

Nice job

[@SawsetTools]

Thanks Carmelo

[@SassyHilda]

You made it look so easy.. impressive detailing

[@SawsetTools]

Thanks Sassy.

[@BlankHouseCoLLC]

Very good tutorial and simple explanation. I was sharing this with one of my helpers to help better explain the concepts of setting crown and how measurement increases are very important so you don’t burn material by 1/8” or 1/4” trying to get a fit inside corner/outside. 👍🏻

[@SawsetTools]

Good call.

[@ricardogalvan6700]

What type of glue are you using

[@rickwaldner8078]

Im a fine woodworking carpenter by trade for the past 20 years, lots of good tips on this video, how ever, the ceiling you were working with was exceptionally good, most of what we come across is much worse with being off level and bade bumps / dips in the ceiling. it can get much more complicated at times.

[@SawsetTools]

You are right Rick. I have done a lot of old homes and plastered homes are the worst. I'm retired now, and that's my son on the video. Thanks for the comment.

[@anilpodgornik8206]

Nice video. I agree I pays of to measure corners beforehand. Just like to add that in my experience there's no need for a nail gun if using an appropriate glue. Although i use type of quick glue for the corners, wich means they stay in place, if the corner glue is slow acting ther is possibility of them moving out of place.

[@SawsetTools]

Food for thought!

[@sharonhoare5790]

Anil Podgornik I have never used nails in this way either. I only use them as supports underneath go stop long runs sagging, and then only if needed. Of course they get removed afterwards.

[@SA-SH489]

Nice job

[@SawsetTools]

Thanks Shahsavar

[@BigmoRivera]

Great Tip Nice Work... Awesome Tool. 👍

[@SawsetTools]

Thanks for you input!

[@ringokissu]

Great video! My husband found this very useful. Thanks!

[@SawsetTools]

Thanks

[@jeffreylonigro1382]

Great video!

[@SawsetTools]

Thank you!

[@janetcampbell5360]

THANK you for your amazing informative information.

[@SawsetTools]

Thank you for your comment!

[@247videogame]

👍👍 excellent!

[@SawsetTools]

Thanks!!

[@foreignercatracho]

Thank you so much for sharing your knowledge. I learned a lot of tricks

[@SawsetTools]

Thanks for your compliment.

[@cynthiaescobar3762]

Great advice! I learned a lot!

[@normajk2]

Thank YOU !!! very helpful !!! Good Job !!!

[@thetoolman3355]

Thanks for the compliment.

[@bryonsview]

Thank you for sharing. This video was extremely informative. Way better than the old homes guy. Lol. I have to order that tool that allows you to measure angles.

[@SawsetTools]

Thanks for your comment

[@cancerenergy2464]

Great video💪🏽💪🏽

[@SawsetTools]

Glad you liked it!!

[@joelewis2401]

Great video

[@SawsetTools]

Thanks!

[@lordbyron4163]

Nice.... Thanks for this one. Been dying to attempt my victorian coving.

[@joseluismacias3878]

Muchas gracias amigo muy bien explicado tu video aprendi bien todo, boy a empesar mi proyecto

[@thetoolman3355]

Thanks for your compliment.

[@mary-bethdouglas2936]

Great Video, gonna get this for my husband for sure

[@SawsetTools]

Thanks!

[@HaNguyen-iq8un]

I like your video .

[@SawsetTools]

Thanks for your positive comment.

[@wvoyles]

i do returns in a 3 piece joint,with saw at 22.5 degrees,and i use CA glue with an activator,looks a lot better than a 90 degree return

[@SawsetTools]

I like that look. Will try it sometime. Thanks

[@billzima7068]

I do mine same way. I did the 45° returns for so long and seeing the same thing in every house..i wanted a different look.

[@SawsetTools]

@@billzima7068 I will definitely try it next time. Thanks

[@JohnDoe-ft2nh]

Great video.Thanks man.

[@SawsetTools]

Thanks for the compliment.

[@toronto690]

What to do when the ceiling is not even, and the crown moulding titer totters? Which stud finder do you recommend. Need a reliable one

[@paulinemonastero322]

Your how to videos are the best we’ve seen as far as clear precise descriptions and make us feel like we can tackle it ourselves so thank you. Do you mind sharing under your descriptions, what wood glue you use as well as name of seem and hole filler please? This would help eliminate the guess work when we need to purchase.

[@paulinemonastero322]

Another note if you don’t mind, what model and where to purchase the mitre saw you are using and what the actual brackets you use to hold crown moulding in place on the saw table?

[@thetoolman3355]

We use Lepage No More Nails for gluing, and Dap WATER base calking for the final part. But any WATER base glue that comes in a calking tube works. We use drywall compound to fill holes.

[@thetoolman3355]

@@paulinemonastero322 Any miter saws with a 12 inch blade is good. Each brand will have there own crown stop.

[@sarahscarola4008]

Any suggestions for a glue brand that would comparable to Lepage that is available in the US? Picked up Loctite All Purpose but it comes out as a foam and is very awkward to use.

[@SawsetTools]

Sorry, being in Canada not familiar with your product brands. Any product that are water based and paintable would be great.

[@joseleal9134]

I am stuck on one thing, when you show the tutorial at 5:14 you do not say how to cut the first piece you show in the tutorial. So basically the piece that you put that small little piece on. I do not know how to cut that piece so that the little piece fits perfect. Some help and clarification would be very helpful

[@SawsetTools]

Sorry Jose, in the editing it was decided not to create a long video. So I couldn't show every detail. Go to sawset.ca Videos and Tips. Look under Template and the piece you are referring to is the 5th picture.

[@matthewo755]

Great video, lots of helpful tips. Thanks.

[@SawsetTools]

You're welcome!

[@ivankotarscak5014]

Simply best

[@SawsetTools]

Thanks Ivan,

[@Kaladesignbg]

Great job!!

[@SawsetTools]

Thanks, always nice to hear a compliment.

[@mregan3855]

Great video,,

[@SawsetTools]

Thanks for the compliment.

[@robertosalazar3628]

Master good job 👍

[@SawsetTools]

Thanks

[@juanquintero3195]

Great vid. What style, material, and how and size is the molding you are showing in the video?

[@irisostachowski1489]

We use a 5.5 inch wooden Georgian style.

[@fredsanford6143]

Hello, Love the video. About to start a crown moulding install. The previous owner didn’t want to finish the crown, and stopped with a flush cut on an inside corner 3:10 3:10 . I understand it’s best to use a coping saw, but how do I cut the moulding and get it to matchup? Thank you

[@SawsetTools]

I know the traditional way is to cope, but mitering is the best way, because the 2 moldings lock each other in place. If the existing crown is not glued down, I would remove it and miter. Mitered corners are also crisper.

[@casperlokz8348]

Good stuff!!

[@SawsetTools]

Thanks for your input!

[@raycarter575]

what size nail gun were you using? great job on the video! i'll keep coming back!

[@SawsetTools]

18 Gage brad nails x 2 inch.

[@SawsetTools]

Have a great day.

[@miguelespinoza8602]

I love it !

[@SawsetTools]

Thanks Miguel. It's always nice to hear a compliment.

[@SawsetTools]

I use a cordless drill, with a fine bit to find studs.

[@zaneh6188]

GREAT VIDEO, Well informative. Thanks

[@zaneh6188]

where can i find that clamp or metal plate on the Dewalt miter saw? i have the same saw

[@SawsetTools]

@@zaneh6188 it's called "Crown Stop". I bought it at Lowes. It's also available on Amazon. Thanks for your comment!

[@H2oToGoWH]

Nail hole tip ; use drywall putty, you can sand it lightly or wet cloth when it’s close to dry. I find caulking doesn’t fill that great, but that’s just me.

[@thetoolman3355]

You are right. Dryway compound is the best way. My mistake.

[@bbundy1069]

Excellent video. Thanks for sharing.

[@SawsetTools]

Nice to hear.

[@juanfernandez8060]

the video is wonderful. very good instructions. have a great success

[@SawsetTools]

Thank you!

[@knotallthere66]

Caulking nail holes okay yea ya do it once in awhile ,best is quick dry Spackle goes in like butter and it’s sandable ,

[@SawsetTools]

You are right. Thanks for your comment

[@barrygordon1173]

And no glue on bottom of crown...brads only...want to be professional...

[@bobdavis3389]

Very good , informative , !!

[@SawsetTools]

Thanks Bob

[@billzima7068]

Need a cushion on that gun. I would highly recommend not caulking nail holes. Use a filler that wont shrink. I use a product i think from DAP but we push it in really good then just little on the heavy side. The filler is super lightweight and can really be sanded by hand. But we just run around tje room with a sanding sponge..it only takes a few minutes and it smooths out any of the crap primer job, the over fill of filler we applied and makes splices and outside corners flawless. Also dead end returns we use CA glue and put it together on the bench b4 it goes up. Blocking,splices and outside corners use wood glue!! Inside corner we cope and then apply a small bead of caulking with adhesion b4 fitting together. Keep everything clean as you go. I like having a wet sponge with me but only to keep my finger clean and moist to slick over the caulking. Crown molding is one of them things where it can be tough in the beginning but when that lightbulb goes off in your head and you totally understand it ..it then becomes as easy as installing baseboards. Very nice angle finder..with that and a bevel gauge you are guaranteed a beautiful outcome. Happy building all!!:)

[@SawsetTools]

You are right. Thanks for the helpful tips.

[@sams872]

good video, thanks

[@SawsetTools]

Thanks for the compliment.

[@zulmarosario1346]

Nice video thanks for sharing. Can I only use glue my wall are plaster and I think it hard for those nailer

[@SawsetTools]

Plaster fractures when nailing. I recommend you nail to the studs.

[@madjack5002]

Your skill is impressive. Thanks for the video. I bought the Kregs jig today. And all of the videos say to cut it top down. They left me wondering what the hell is the top and what is the bottom. Hopefully mine turns out looking like this. I bought about 40' extra just to practice with.

[@SawsetTools]

Thanks for the tip.

[@thetoolman3355]

Very informative video, thx!

[@SawsetTools]

You're welcome!

[@jerrypelletier2328]

I always cut crown holding the crown flat on my chop saw.

[@thetoolman3355]

See our other video. (How to Cut Crown Molding ON THE FLAT using Sawset Protractor.)

[@bolerdweller]

I do too. Most accurate way to do it

[@iszchannel8703]

Hi sir.. What type glue you use to stick crown molding?

[@SawsetTools]

Any water base glue that comes in a calking tube works. We use Lepages No More Nails.

[@iszchannel8703]

@@SawsetTools tq sir.. 👌

[@yichalnegussie5401]

Great Job in providing nice tips and tricks, I got answer to my questions Thank you

[@SawsetTools]

Thank, My pleasure.

[@stZapple3x]

What t bevel you are using in this video ?

[@SawsetTools]

Any Sliding T -Bevel is compatible with Sawset.

[@goodboyringo9716]

What gage gun are you using ? Is a 16 gage to big?

[@SawsetTools]

Not a fan of 16 Ga. With MDF, the edge around the hole is raised and shows when painted. 18 Ga is better.

[@goodboyringo9716]

@@SawsetTools ... Oh ok, I'm not using MDF , I'll be using wood. Maybe the 16 g would be ok

[@SawsetTools]

16 Ga. sounds sounds good. Swipe you finger over the hole and if it's not raised, great.

[@rodralph824]

Great video. You might indicate which "glue" you are using.

[@thetoolman3355]

Hi Rod, We use La-page No More Nails. Any dense glue would work.

[@lordbyron4163]

Question. Can you install crown mouldings over walls and ceilings that have wallpaper on? or do you have to cut the paper away first ?

[@SawsetTools]

Yes, remove wallpaper and wash off glue residue.

[@leeoien3645]

How about a short video on what to look for in a miter saw and other critical tools?!

[@SawsetTools]

Something to think about. Thanks

[@ericcharp4388]

Easy peasy. Ya right!!

[@thetoolman3355]

Eric, patients is the key.

[@chivasrayadas458]

Where can I get that tool (the sawset)

[@SawsetTools]

Go to sawset.ca to place an order. We ship world wide.

[@locatejohn]

What's are your thoughts MDF and non-MDF crown moldings material?

[@irisostachowski1489]

Wood does a one time minor shrinkage, because of moister content in the wood. I use MDF, because doesn't shrinkage. Recommend oil prime before painting wood or MDF. This keeps moister away from wood.

[@seven73ify]

Awesome! Thanks

[@SawsetTools]

Thank you!

[@hakeemlayode1474]

Thanks nice n really enlightened

[@SawsetTools]

You welcome.

[@anthonykhan3424]

Very good work tanks

[@SawsetTools]

Thanks for watching!

[@irisostachowski1489]

Most silicon caulking's are NOT paintable. Be careful paint will not stick. We use Lepage No More Nails for gluing, and Dap WATER base calking for the final part. But any WATER base glue that comes in a calking tube works.

[@juliom.277]

I have 4 1/4 crown, will that Dewalt jig work for that size as well?

[@SawsetTools]

Dewalt Jig is fully adjustable for a 4 1/4 crown.

[@robertsoobramani202]

What type of glue do you recommend for installing crown mouldings?

[@SawsetTools]

We have always used a water base glue, such as Lepage No More Nails.

[@Nicole-fj3pt]

Beautiful

[@SawsetTools]

Thank you! Are you talking about Jordan, hahaha!!

[@weldonpinder7295]

One question. how do you join a inside corner without coping

[@SawsetTools]

Inside corner mitered is easier for the DIYer. Has more gluing surface, for a stronger joint. The mitered moldings lock each other in. The corner has a sharper detail. Coping is traditional, and OK.

[@AndyB718]

You're Hired ! Ty for the video.

[@thetoolman3355]

Thanks for the positive comment.

[@gamerm4876]

Hey great video thanks for taking the time too teach us all how too do this . Question what size nails are you hitting that crown molding with ? Also what type of glue are you using ? Thx

[@thetoolman3355]

2 in. 18 ga. Brad nails, trying to hit the studs when I can. We use Lepage No More Nails for gluing, and Dap WATER base calking for the final part. But any WATER base glue that comes in a calking tube works.

[@KeironRaven]

2:06 😂

[@genekhuc8824]

Hi very helpful however do you cut 44° from one side only or from both sides?

[@SawsetTools]

Always cut both. Also positioning of crown on the wall is important. To high or low on the wall could gap top or bottom. Adjust it to find that sweat spot.

[@slop9424]

Can the decorative part go in the cealin?

[@SawsetTools]

Yes, but not recommended. The eye sees the wall before the ceiling.

[@slop9424]

Thank you!

[@slop9424]

I appreciate your knowledge.

[@okalitoescalobi1529]

Bud job to fill the nail holes with caulking.

[@SawsetTools]

My regret, wish I used compound.

[@ECO-AFRO]

Wow! If you know, you know

[@SawsetTools]

Thanks

[@locatejohn]

Is the caulking material made specific for MDF glueing?

[@irisostachowski1489]

I don't believe there is a calking for MDF. We use Lepage No More Nails for gluing, and Dap WATER base calking for the final part. But any WATER base glue that comes in a calking tube works.