How To Install Dampers R3000 P600 3880 DTG

[@timdoreck3208]

I think you nailed my problem. Using a cleaner on the caps , one allows the fluid to pass thru and one does not. The cleaning fluid just sits until it evaporates away. I have the removal of all of the covers down to a science, so this should be no problem. Thank you for the explanation

[@AnthonyCreekTV]

not a problem!

[@1204ROY]

Thanks I believe buying another damper bay is better than buying the black switching damper.

[@sergio67p]

hello, they are the best maintenance tutorials seen on the net, I have a question, after changing the damper for black, just turn on and print or you need to use the epson Adjustement program, thanks for the answer. Greetings from Italy.

[@dika7210]

Hi Anthony thanks for next vdeo .. once i change dampers do MUST pull inks threw new damper .. seems pretty hard to do that

[@AnthonyCreekTV]

You can't pull ink through the dampers, you can only pull ink by an ink charge or head cleaning unfortunately. No problem and you're welcome :)

[@dika7210]

@@AnthonyCreekTV great and thanks thats what i thought as wall cant do ink charge cause asked for original cartridges but with head cleaning thought gonna do it itself .. thanks once again Anthony

[@AnthonyCreekTV]

No problem, your only alternative is to basically perform strong head cleanings!

[@j8rtUfh3evz]

Great video - one question, I have PK ink blobs on paper (fine for MK ink) so I guess it's the MK/PK damper problem. Which damper needs to be replaced? Thanks

[@AnthonyCreekTV]

Yes more than likely or your capping station or wiper need to be clean or replaced

[@TodColbert]

You mention that it is easier to replace the entire ink system assembly. I need to do this as the ink selector switch has failed. Could you please do an instructional video on this? Also, you mention to flush the system every two months to prevent problems. Can you do a video on that too please? Thank so much!

[@oziermuhammad2488]

Hi Anthony: your fix it yourself video and advice on Epson 3800 and 3880 dampers is awesome and will save me big bucks. I have a question? I am in the process of re-assembling my 3880 after cleaning the printhead. What I want to know is; do I need to make a "Space Making Jig," to make sure all lines are in alignment in the printhead and IC cable as I reassemble? Thanks for your indulging me on this question. OM

[@AnthonyCreekTV]

Great to hear! No problem!

[@sergio67p]

Hi, I still have a question for you, epson 3880, can you tell me why it doesn't print at 2800ppi, only a large soft and clear halo comes out, instead at 1440 the image is defined, but rather clear. test print is ok. Thanks for the reply, Merry Christmas from Italy.

[@AnthonyCreekTV]

I have no idea to be honest

[@manuela.p.p.8018]

Hi, I have an Epson R3000 and after carefully changing the dumpers the printer does not start, the ink and power lights come on and they remain blinking

[@Finalfootagefilms]

Can you please describe how to take that Head out from the bay?

[@frankdoyal6450]

great vid,,, can you tell me if the 600 and 3880 interchangeable with the R3000? I can't find these parts for the 3000 but there are plenty out there for the other two modles..

[@AnthonyCreekTV]

yes they are interchangeable

[@rocknrollluzze]

What do you do when you replace the dampers to get the ink flowing again?

[@AnthonyCreekTV]

your printer should have some type of ink charge

[@sergio67p]

After cleaning the black selector well, well, well, there are still many stains on the printout, why?

[@AnthonyCreekTV]

You're going to have to probably inspect your head cables or any me thing that might be on the head area itself. Any ink on the cables or on the head port where the cables get inserted will cause a problem

[@sergio67p]

Thanks for the reply

[@AnthonyCreekTV]

@@sergio67p no problem

[@havefun8962]

Thoose motors in damper is for what use?

[@AnthonyCreekTV]

I believe by switching which damper to use but not 100% sure

[@havefun8962]

whats the use of that motor in the dumper?

[@AnthonyCreekTV]

Maybe to let the printer switch which damper to release pressure but not 100% sure

[@danishm4266]

Can I use damper unit from 3880 into p600?

[@AnthonyCreekTV]

Danish Che yes absolutely

[@balamdiaz3413]

Hi, so the P600 and 3880 printheads are fully interchangeable? there's no need to do anything else but mount it and go? thanks in advance :)

[@AnthonyCreekTV]

they are not interchangeable

[@Finalfootagefilms]

NIce

[@manuela.p.p.8018]

Does the change of these dampers solve the ink spill on the paper?

[@AnthonyCreekTV]

yes sometimes, it could be other things too

[@markfewtrell2198]

Does this cure Epson r3000 clogged ink damper (fine screen filter).

[@AnthonyCreekTV]

Our cleaning solution Purple Hammer busts through clogs nicely

[@ludwiguy51]

@@AnthonyCreekTV If my black matte to gloss switching valve is clogged on my 3880, how can Purple Hammer help?