How To Install Door Trim: Corrugated Metal Siding Head And Jamb Trim Installation For Metal Building

Corrugated Metal Siding Installation - How To Install Door Trim On A Metal Building. Step By Step Installation Instructions For Installation Of Head Trim, Jamb Trim, And J Channel.
00:00 How do you install door trim on a metal building?
00:54 Head trim or jamb trim?
01:43 Can you use jamb trim on a horizontal corrugated metal siding installation?
01:56 How do you install J trim around a door?
02:13 How to cut corrugated metal siding door trim
03:35 How to fasten door head and jamb trim
03:58 How to install door head trim for corrugated metal siding
If you already have not purchased your metal siding panels give us a chance to bid your job. Save 15% to 50% with our manufacturer direct pricing and great customer service. Inexpensive delivery anywhere within the United States.
Visit Our WEBSITE
bit.ly/wsmr-website
Visit our LEARNING CENTER
bit.ly/learning-center-wsmr
Download Our Install Guide
7/8" Corrugated
www.westernstatesmetalroofing...
Corrugated Metal Siding Installation Details
www.westernstatesmetalroofing...
When installing corrugated metal siding you will need to install metal trim around a doorway. Metal siding door trim will require a head or a jamb trim which is also called a J trim or J channel.
What's the difference between head trim and jamb trim?
Head trim and jamb look similar. The main difference between the two is that jamb trim has a return and head trim has a hem.
FOLLOW US ON SOCIAL MEDIA:
FACEBOOK: bit.ly/facebook-wsmr
INSTAGRAM: bit.ly/instagram-wsmr
TWITTER: bit.ly/twitter-wsmr
LINKEDIN: bit.ly/linkinin-wsmr
HOUZZ: bit.ly/houzz-wsmr
PINTEREST: bit.ly/pinterest-wsmr
KZbin: bit.ly/youtube-wsmr

[@twistedt897]

Great job man. I've done metal work for years. You are the only one of few that I ever saw do it right. It all locks together if done correctly and more importantly, keeps it flashed properly.

[@WesternStatesMetalRoofing]

We appreciate the kind words and support

[@marshacowan1252]

Very helpful! Thanks!

[@MacSherry]

Thank you

[@saucesgalore]

Very nice

[@MrGwizyadig]

Would it be a good idea to use flashing tape all around the edges after installation?

[@asaspicer4114]

As asked before, how do you finish off the inside recess?

[@bevandashwood1030]

Hey, does a 13/64 drill bit drill a hole through a heavy structural girt, or perlin, or column for a size #14 or # 10 tap screw? If I remember correctly it would be a #10 tap screw, while a 15/64 drill bit would be for a #14 tapscrew, while 3/16 would work for a #8 tapscrew through heavy steel.

[@michaelrjacques]

2:38 You should "always wear protective gloves when working with metal," even if the person in the vid doesn't.

[@WesternStatesMetalRoofing]

100% agreed. Oversight on our end. Thank you for the comment.

[@jonathanwhitehead6314]

what is used to finish off the space between the window and the trim?

[@asaspicer4114]

Sure wish they'd answer this

[@ryankelley9757]

They won’t answer it because they don’t have one. All these guys build these homes for people but never tell you they are steadily fighting leaks until they get lucky it finally works correctly.

[@harleyguy932]

If you don’t want the 45 degree cut can you just leave it square?

[@TheEveryThingConstructionShow]

I left much mine square. I see no problem with it. Just make sure water can escape thru the bottom J trim. I should have a video posted on my channel within a week on how I installed the metal trim and siding. Just thought I’d throw that out there.

[@spindlenine]

"Always wear protective gloves when working with metal" - meanwhile, the guy in the video is not wearing gloves. :)

[@WesternStatesMetalRoofing]

Absolutely correct. Missed that when we shot the video.

[@TheEveryThingConstructionShow]

I don’t wear gloves either. I can’t feel what I am grabbing for with gloves on. So I just take my cuts with pride as they come. Lol😅

[@pblask6451]

Fancy watch and no gloves?

[@WesternStatesMetalRoofing]

He should have been wearing gloves. We missed that during filming. I appreciate you commenting on the video.