How to Miter Metal Trims! BEST Way I Know!

I am still asked quite often on using metal
J channel and how to trim windows and doors. This little quick tutorial should help you in many different areas of a job. Hope it helps and if so hit the thumbs up and subscribe for more!
Building plans available… NEW Barndominium plan available now!!
Https://rrplans.bigcar...

[@RRBuildings]

If you enjoy the content!! Subscribe and stick around! Thanks for the support.

[@ivtec845]

Trolls will say it's fake lollol

[@rigolmgs]

True professional at work sharing his craft--thank you!

[@justlycadag810]

I read the entire Ryan’s kzbin.infoUgkxGqOCINHE0Z0E5gxzSdNi9NWGugRY5Hm2 Plans and was able to make a shed plan. Using Ryan’s Shed Plans alone, the shed itself is great. Where I wish I knew more is with respect to ground preparation and foundations. Maybe that's beyond the scope of Ryan’s Shed Plans.

[@jakewiebe8382]

Works for vinyl j trim on siding as well. One of my trademark features of a job, no one does corners like I do. Customers love it

[@codygooch510]

Being a plumber who struggles with cutting pipe straight idk how y’all think of this Shit lmao.

[@timothybroce824]

I started following your work … you’re craftsmanship is very apparent… you do very clean precise work… very informative Very helpful to the DIY community 😎

[@ejenterprise5540]

I really appreciate your attention to detail and the forethought concerning wind, water as well as as aesthetics

[@DachsAutos]

Always lots of great advice! I referenced a bunch of your material when building out shop last year! THANK YOU

[@DerekPetersonLives]

I'm so glad you made this into a short clip, this is my go to for anyone that asks including my own revisiting from now on!

[@westwardbound1436]

Your so positive...positively lapping

[@lisaferrara8120]

Thanks for giving us so many pointers.

[@jamesgibbs8827]

Looks nice and clean,, we been using this method on vinyl and metal for many years. Especially on J-Channel around windows etc.

[@dethmaul]

I made a test square 6"x3", and it worked great! I did 5 3x3 windows.

[@aaronmyers4054]

Fine job

[@Gangsterbriz]

Bro i absolutely love your channel. Cheers from Suriname!

[@sgbuilders165]

The Best!!!! Now how to I fixe a bottom wall drip edge already messed up!!!!! Corner Trim

[@lancewalker6067]

Gotta love tight clean metal work. 👍

[@Mityob67]

Super clean

[@Mityob67]

Super clean

[@tomfoolery5033]

You should note which way to run these miters and the tab that gets bent back into the j in a way that’s more conducive to water exfiltration. Good vid. Good tip on cropping that miter point to clamp down on the other j.

[@realstaceylewis]

I think you could get away with an entire metal series. I’m one that’s for it. If premieres pay more do them as premieres.

[@RRBuildings]

Probably true I could put together a playlist of all the trim details

[@jorgeeee1890]

I work with 22 ga metal most of the time, 24 ga feels like paper and it’s easy do those miters cleanly

[@grahampearson6431]

Dude.... you are a craftsman

[@brandondimmitt8467]

Be nice if all roofers were as professional and paid attention to detail as u guys

[@DaytonaJim78]

Looks good bro 😎

[@davidbirmingham6462]

I have watched alot of your Videos and I know that you truly know how to build old and you know your metal I wish that I could afford to have you built me a barnanium For a home I know it would be beautiful

[@ronallen6578]

And regardless of how good you are you still see that corner. I did this for a fair amount of time and while it may look pretty good it just doesn't look good. Some are definitely better than others, but I truthfully hated working with vinyl or metal. 😢😢

[@chadwahlquist2743]

That is a cool trick - thanks man!

[@JohnJohnson-bg2oo]

If you do your miter properly, the corners match, without HACKING it up like a 1st year apprentice!!

[@frankly2677]

Kyle you should see my j trim around all 14 windows of my barndominium… youd be proud 🥲. I learned from a tutorial you did a long time ago about j trim around windows.

[@silvergrizzly316]

Great info Kyle!!! 👍

[@Caleb-vr1mi]

can you do a short on bending the edge of ridge vent on a gable roof?

[@phillipthethird42]

Nice.

[@JokaRed3]

Thank You!

[@kitsuiam1082]

Well...i never knew that metals do expand and contract....lol...i thought only wood does....🤣🤣🤣

[@classlessfool9398]

The only way to do it right

[@pantsmage970]

Finally an actually useful tip for construction I've come across

[@McGruber1]

That's slick.

[@SuperKinahead]

Dont forget to waterproof it

[@gasolinedreams2691]

I bet this guy has had some wicked cuts to his hands.

[@skipdegraff6547]

Ummmm.... you should point out that the tab inside should be down because water flows down so top is tab on both sides and sides are tab over bottom and bottom has 0 inside tabs and now any rain will naturally fall not penetrating the flashing.

[@HenrikJanssonFilipstad]

It is all about the details

[@TheHamadanners]

We call those dog ears

[@juanContreras-hj2bl]

I'm guessing this is for outside but where? I'm a painter but is metal siding a thing now?

[@koffee911]

Is this a picture frame? Nice demonstration

[@codybersicc7939]

now do all 4 and show the result

[@quitram]

so bossy...

[@skipdegraff6547]

Mold

[@5castles893]

Same thing with plastic j

[@giovannipetitti1588]

Surgical precision 💯💯💯👍

[@colinmaclachlan2319]

You could just mitre properly and not trim that corner. Also notching the the male piece allows it to fit into the hem. 50 feet of aluminum will expand or contract about 3/8ths of an inch with a 40+ temp change. A corner like this will never see that much change, just laziness and a poor excuse for shoddy work.

[@bethisway]

"When it's all DONE?...." lmao

[@luisquiroga4888]

You're cutting your tabs to thin all u need is to cut the tips of the tab so it could be tighter well that's just me I'm a sub for eagles carport

[@asueft]

🤔👍

[@백기문-i9v]

🙏🙏🙏👍

[@bradslone8511]

Not trying to be rude or to insult anyones intelligence so plz don't think I am because am nowhere near an expert at this but, why couldn't you just sand the bit that's protruding up and paint it black with touch up paint.

[@konamanstudio2447]

👍🏻🍻🍺🐶

[@BraxxJuventa]

👍😁

[@StabbyMcStabwood]

Guess you haven't seen the technique that uses a few cuts and you just fold the corner.

[@Adam-xo6ld]

He’s showing one way of doing it, not the way you were taught to do it. Guess you haven’t heard how to keep your shitty insights to yourself

[@skipdegraff6547]

@@Adam-xo6ld guess you , like the creator of the viedo, don't understand why they use j trim. It's FLASHING Stopping water is the point and this example is good looking and functional disaster.... Karen

[@jilliansherman5376]

That's the wrong way bud

[@jerrynewberry2823]

That looks like crap!

[@Townsendcat2]

Metal suck asz

[@mawi1172]

I'll take USA ingenuity over Asian ANYTHING, ANY DAY. There are no geniuses in Asia like in the USA!!!!