How to Install DRL and Sequential Turn LED Strip for Headlights | 2009-2013 Toyota Corolla

[@dammitdarius]

Will definitely use this as reference. Great video, bro.

[@eazidiy]

Awesome! Have fun doing it.

[@bataljamal994]

Definitely worth it, good job

[@eazidiy]

Thank you

[@anhhaineou.s.a425]

Thanks for sharing. I am about to install mime on 2015 sienna.

[@eazidiy]

You are welcome

[@marcialvalle9179]

Looking gooood 😮‍💨

[@eazidiy]

Thanks

[@ryze_android17]

Excellent video man 💯💪

[@eazidiy]

Thank you for your positive 🙏🏾 feedback

[@samanthaGmusica]

Looks awesome

[@eazidiy]

Thank you!

[@pantaleomusoke3324]

Well done engineer

[@eazidiy]

Thank you

[@reiki2165]

Thanks! I was thinking how I am going to do the wiring. Instead of just plugging it into that port, im going to wire tap them with wire brackets.

[@eazidiy]

You are welcome

[@lloydPT18]

Hey man, great video! Can you tell me the color coding from your headlight where you tap the wire of LED? I’m not that great with wirings but seems like simple if you know where to tap the wore. Thanks!

[@eazidiy]

Sorry for my late response. High beam light has 2 red wires, connect red wire from the LED to Red/Black wire as DLR. Low beam light has 2 wires, Red wire and White/Black wire. Connect black wire from LED to white/black wire. Turn signal has 3 wires, Green, White/black and Red/black. Connect Yellow wire from LED to Red/Black wire.

[@MbekezeliClemence]

Great video

[@eazidiy]

Thank you

[@SAMYLAMEES]

Wonderful job

[@eazidiy]

Thank you!

[@ctpizza5612]

Can I sneak in the front bumper like you did to install a black grille like the one on yours?

[@eazidiy]

You will need to drop the bumper completely for that

[@salos79]

Nice video. I have a vw polo of 2011. There are no colors on the headlights wiring! Parking light with 2 black wires, low beam with 3 black wires (2 connected together and 1 seperate) and high beam the same as low beam. I conected the red to the parking lights, the yellow on the indicator and the black on the high beam single wire. When the engine is off they work perfect, when the engine is running the don't work at all! Any suggestions/ideas??? Thanks

[@eazidiy]

You may consider using a relay for the wiring. See my other video on how to use relay kzbin.info/www/bejne/nGfNfGimrLiVoLM

[@sikskillz2186]

🙌💯💯💯

[@eazidiy]

🙏🏾

[@lukaaleksic1108]

Is it possible to connect it so that only the turn signal works, without the lights. I want to save my lights?

[@eazidiy]

Simply connect just the yellow wire to the turn signal and black wire to the ground wire.

[@Jorcelio]

Hello bro I have a Toyota Auris 2007 and I want to know how to acess wiring to install the spotlight. Thank you

[@eazidiy]

Hi I have a 2010 Toyota Corolla. When you open the hood, take out the bulbs from the head light assembly, you should be able to identify the wires to connect

[@zacharypadgett7426]

What all did you have to do in order to connect the DRL led strip wires to both the headlight wire harness and the turn signal wire harness?

[@eazidiy]

High Beam Light (connect LED red wire to red/black wire)== DRL Low Beam Light ( connect LED black wire to white/black wire) === Ground Turn Signal Light ( connect LED yellow wire to red/black wire) === Sequential turn signal

[@ndruks2265]

can you connect the red wire to the cars daytime running light? just cause I want to have the LED to be on with only daytime running lights on not the high or low beams on if you know what I mean

[@eazidiy]

Yes, this was exactly what I did in the video. My daylight is also with my high beam light. I connected the red to the daylight wire.

[@siawzy8279]

Great video, I want to buy it but does its lifespan long enough right? Like maybe 3 or 4 years

[@eazidiy]

I had mine for over 2 years now

[@siawzy8279]

@@eazidiy owh okok, thanks so much

[@mattuccino9731]

In Australia we have a V6 Camry named as Aurion. I essentially have a 2011 Camry with no DRL support originally. I'm planning to tap into the park lights to turn on the plain white DRLs- is this a good alternative to tapping into the headlights?

[@eazidiy]

Hi, I think if you understand relay wiring it will be better. Get a relay contactor, do wiring for normally closed and connect it to your low beam light. This means, your DRL light will be on as long as your low beam light is off. DRL will go off when low beam light is on. I hope you understand me?

[@mattuccino9731]

Thanks for your input, and yes that makes sense 👍 Great video for reference

[@eazidiy]

It is my pleasure. Thank you

[@eazidiy]

@@mattuccino9731 I have a video to help you kzbin.info/www/bejne/nGfNfGimrLiVoLM

[@mizkimo466]

Do you think this will work on toyota solara 2007

[@eazidiy]

Yes it will work, the wire color may ne different.

[@muhammadimtiaz6659]

amazing wow great job 👌👌👍👍

[@eazidiy]

Thank you!

[@andrewmoss1753]

Do they turn off at night when you turn on your headlights ? Thanks

[@eazidiy]

Yes, DRL goes off when headlight is on!

[@andrewmoss1753]

@eazidiy cheers mate thanks for the reply

[@eazidiy]

You are welcome

[@ahmedfabian9210]

How long is the LED strip you install?

[@eazidiy]

Going 2 years

[@ahmedfabian9210]

sorry I mean how long is the LED strip is it 45cm or 30cm the length @@eazidiy

[@eazidiy]

I used a 17 inch (43cm) strip in the video

[@litoeast]

I’m purchasing them from your site is it better than Amazon and how long does it take to come ?

[@eazidiy]

I ship USPS Ground 3-5 days delivery. I have quality and tested products.

[@litoeast]

@ and will they fit any head light trim I have a 06 Honda oddesey

[@eazidiy]

The placement of the LED depends on your car's headlight. It is a universal fit.

[@litoeast]

@ gotchu bro ima order it now thank you for the video diagram aswell

[@litoeast]

Just ordered it brother i will let you know when they come in and I install them

[@The-Ford-Man]

so with this you have to have your headlights on all the time to make the drl work

[@eazidiy]

No. My car has DRL function already. I only tapped into the wire. The high beam bulb is also my DRL bulb.

[@hotplugin]

nice

[@eazidiy]

Thank you

[@nobodyhome8148]

Pointless connecting to headlight.......... connect them so they come on with ignition so they are always on.

[@eazidiy]

Thanks! You are entitled to your own opinion.

[@Sammann71]

Thanks for sharing but I got a question for you that the high beam light switch must be on in order to have DRL on, right?

[@eazidiy]

The high beam light has 2 wires on it. DRL and high beam. If your car has DRL, then the LED will come on. I have another video on how to use a relay if you do not have DRL