How to Install Dzus Rails: Tech Tip Tuesday

Рет қаралды 72,200

Күн бұрын

Пікірлер: 55

@ScottB 4 жыл бұрын

I’ve done this before and it’s easier if you use a die grinder and a rotary file (burr bit) to put the Dzeus button holes in the hood. No need to remove the hood for each fastener and if the pilot hole is slightly off, it allows you to adjust for a small error.

@cturboaddict 2 жыл бұрын

This was an AMAZING TIP! Made the install way easier/faster. Uploading a video of your tip now! kzbin.info/www/bejne/gYGkopaPbK6AjZo

@matthewmcclintock5806 4 жыл бұрын

Hell yeah brother I see that freedom factory shirt your wearing I've already paid for the paper view to watch it I can't wait it's gonna be so rad

@MotionRaceworksOfficial 4 жыл бұрын

Hell Yeah Brother! Can't wait to see it either!

@bobbywitcher5042 3 жыл бұрын

Your and awesome teacher I love tech tip Tuesday keep thanks!

@jeremyeubanks2387 4 жыл бұрын

That's a great idea making the rails black.. nice

@MotionRaceworksOfficial 4 жыл бұрын

Its all in the details!

@Seantubes 3 жыл бұрын

Really wish you would have shown doing the front two on the sliding rail. I'm trying to figure out how to do that on a 99-04 mustang.

@deankay4434 4 жыл бұрын

I am slightly confused unless the company was bought and they changed the name, but in the late 70’s these where called “DUZ” fasteners. 1/4 turn and these popped off a curved spring that held tight. From front ends of school buses to motorcycles fairing, much less the race car circuit where they where designed for. If my wife has not yet found my stash of HotRod magazine, they had articles showing there use. ASE Master Tech since 1978 - Retired

@mikebrown1408 4 жыл бұрын

Being as though you're making the rails you could make another step in the program and have a center line of the hole witness line

@Reject06 4 жыл бұрын

good boy in action at minute marker 2:23

@trophbrwntrouthunter 3 жыл бұрын

Many pearls in this video, sounds like you’ve learned by doing👍

@Sleeper_Solutions 2 жыл бұрын

At 2:25 the most wholesome moment happens and nobody knew.

@richardscarlett7942 4 жыл бұрын

I wonder how much of that sheet metal debris went into the turbo inlet. You could just use another Dzus rail at the back of the hood and cowl. Mount the rail on the cowl side as you did with the fenders and you have a perfect shelf for the back of the hood to rest on

@MotionRaceworksOfficial 4 жыл бұрын

Definitely a good idea. That is just a mockup turbo we used when building our Coyote Turbo Kits, so don't worry. No Turbskis were harmed in the filming of this video lol.

@andrestnt 4 жыл бұрын

@@MotionRaceworksOfficial yall have a turbo kit that fits an SN95 with a Maximum Motorsports k-member?

@twistedkidmotorsports9093 3 жыл бұрын

Circle templates from the yard store works great for stuff like that

@danmackey9462 4 жыл бұрын

Doug love the videos. And the freedom factory shirt. What about the thickness of the head of the rivet that holds the springs in. Wouldnt that have to be taken into account as they sit higher than the rest of the rail and the hood would then sit on the rivets?

@markfuchs9385 Жыл бұрын

Excellent video...

@K.K.808 3 жыл бұрын

Excellent video!

@BOOT 4 жыл бұрын

Been planning on getting some dzus rails for my fox.

@davidzimmer2694 4 жыл бұрын

Great video. You guys should consider doing this for a living....LOL. Good luck at the Christmas tree race Doug.

@ziegle9876 3 жыл бұрын

If you used proper squeezed rivets on the hood, there is no need for holes to accommodate the stick-out of the pop rivets...

@stevel1584 4 жыл бұрын

Excellent video, thanks !

@cturboaddict 2 жыл бұрын

Any tips for getting the rivets in to the left and the right of the slots? (Besides removing all of the springs) I'm using a .125 hood, and I can't get the rivet gun in there to install the rivets. The springs are in the way.

@builtforspeed5274 3 жыл бұрын

Can I put the fuel regulator close to the fuel tank so I just have the feed line go all the way to the front and have a short return line?

@lorenzohinojos4559 3 жыл бұрын

The Irony is that we are being taught how to install Dzus clips for a hood, while wearing a shirt of a guy who will never use a hood lol

@SoftiesTruck Жыл бұрын

How much weight do you save going from a stock foxbody hood to a pin on hood?

@mikecondoluci53 3 жыл бұрын

GREAT VIDEO THANK YOU

@chadb1144 4 жыл бұрын

Do you guys offer a universal rail u really need some to put the back window in my 69 firebird

@bradley750ho 4 жыл бұрын

Thanks for the video.

@swatson0061 4 жыл бұрын

Awesome content

@MET90LX 4 жыл бұрын

Lol my hood can be a pain to put on. The hood I bought used and I put my tabs on myself.

@ncd1966 4 жыл бұрын

I need some for a second generation camaro

@hummv8 4 жыл бұрын

Good video, but the flag above the doorway is backwards. Blue field should be on the left.

@calebclevenger9592 4 жыл бұрын

So el torro has already been built once?

@JoeDaleKeys Жыл бұрын

What about the nose pieces?

@joef.2908 3 жыл бұрын

If I can ever find a light weight hood for my 65 impala..

@anthonyfulmer 4 жыл бұрын

Do you have dzus rails to fit 1985 ford ranger

@errolgumusdere7853 3 жыл бұрын

DONT BE INTIMATED GUYS. YOU DONT NEED MICROMETER TO INSTALL. YOU DONT NEED FANCY TOOL, USE ANY SPRING, YOU CAN ADJUST THE SPRINGS WITH NEEDLE NOSE PLIERS......