HOW TO INSTALL EIBACH SPORT LINE LOWERING SPRINGS ON TOYOTA GR COROLLA 2023 2024

[@Joeyyyy87]

BRONZE BACK IS BACK 🔥

[@GeovanisGarage]

YOU KNOW IT JOEEYYYYYYY 😤😤😤😤

[@javierortizjr9560]

Love the wrap! Congrats coming out super clean!

[@GeovanisGarage]

Thanks Javi 🥹 you the best 🥹🔥

[@marioayala2318]

The wrap looks amazing plus the new height with the Eibach Springs is a killer combo. Great video as always my friend ✌️

[@GeovanisGarage]

Thank you Mario 🙏🏽 always showing love 🙏🏽🙏🏽🙏🏽

[@Tony_miata]

Excellent detailed tutorial thank you

[@GeovanisGarage]

Thank you for watching Tony 🙏🏽

[@TrizzyGac]

Damn the wrap and the drop!! 🎉❤ Sheeesh

[@GeovanisGarage]

Thanks trizzy 🥹🔥

[@boiipauly]

Yesssss! I knew you were gonna do bronze 🔥 One of the best colors and its only right if mr bronz.back does it 🤝

[@GeovanisGarage]

Thanks dog 😂🙏🏽

[@NINJAxMLGx]

Good shit bro! 🔥🔥

[@GeovanisGarage]

Thanks my man 😤😤🙏🏽🙏🏽

[@JoeyD215Philly]

Looks good but a bit too low for my liking. I went with the Swift springs for now and happy with the results. Can’t wait to see future updates on this beautiful GR !

[@adi_sheeeesh3202]

How low did the swift springs get you? I’m looking at lowering mine only about half an inch maybe 1 inch.

[@GeovanisGarage]

Thanks man! 🙏🏽 yeah this kit is for the people that want coils but want a smooth OEM ride 😂 appreciate you for watching man! 🙏🏽

[@JoeyD215Philly]

@@adi_sheeeesh3202 They got me about an inch and a quarter front and rear. I’m running a 265/35/18 tire as well with wheel spacers and it sits perfect.

[@JoeyD215Philly]

@@GeovanisGarage Yeah bud no doubt. The swift springs are a bit rougher than stock, how do these Eibachs feel ?

[@GeovanisGarage]

What size spacers are you running front & rear? These ride 99% like OEM! There is some creaking though. The springs are touching & it looks like they tried to avoid noise by putting rubber in between but it did not work!

[@elantran]

Nice installation video! Every video I've watched said you have to remove the cowl, windshield wiper motor, and the strut plates but thanks for showing us the easier way. I'm assuming you had no issue with the driver side with this method?

[@JG-mg3if]

Great video 👍🏽. One question, what’s the torque spec for the 1 nut on top of the spacer?

[@hksgrc]

Ayeeeeeee 🔥🔥

[@GeovanisGarage]

Appreciate you boss 🙏🏽🙏🏽🙏🏽🔥🔥🔥

[@djfrankfresh]

i have the RSR super downs on my 2021 Corolla. I'm thinking about getting these Eibachs. How would you compare ? Pros/Cons? Any unwanted noises ? Car looks dope!

[@GeovanisGarage]

I would stick to RSR, there is a little creaking noise when moving in parking lot speeds. Nothing wrong with it but there is a noise present! Thanks man! 🙏🏽

[@OfficeAdmin-o1i]

@@GeovanisGarage Mine did noise also, a clunk bind when turning backing up. Put 2 more of those rubber sleeves on each spring, fixed the noise. You can message eibach about it, they will send you free ones

[@Cedwick-o8x]

@@OfficeAdmin-o1i are you on social media I have questions

[@larrywalker2888]

how is the ride comfort now with the different springs?

[@GeovanisGarage]

They honestly ride 99% like OEM! There is some creaking though. The springs are touching & it looks like they tried to avoid noise by putting some type of rubber material in between but it did not work!

[@PaintflowException]

How is the ride quality compared to stock on average roads?

[@GeovanisGarage]

Pretty close, but you do feel like you’re driving a lowered car. The ride quality feels horrible on bad roads.

[@UntraceableFilms]

What about the rear bump stop? im ready to install my springs but that's the only part that is confusing me is the rear bump stop it necessary to install it or no i cant find no info about it or how to do it

[@GeovanisGarage]

There isn’t a rear OEM bump stop, so I didn’t install the aftermarket one!

[@UntraceableFilms]

@@GeovanisGarage oh ok make sense I never done springs before my first time looks easy tho thanks a lot bro 😎

[@GeovanisGarage]

It’s super super easy! Definitely update when you put them on & how you like them! Wish you the best! Thanks for watching the video! 🙏🏽

[@milk7360]

any rubbing issues with the stock wheels?

[@GeovanisGarage]

0 rubs!

[@lannym]

Were you able to access the driver's side front strut without removing the cowling/wiper motor?

[@Dah-too]

Shhhhheeeeeesh

[@GeovanisGarage]

Thanks dog 🥹🙏🏽

[@selekteRas]

question ? the original strut have some rubber stoppers between the springs or i have to remove ?

[@GeovanisGarage]

You must swap everything over to the new spring boss!

[@ByThePond]

so you can't camber the front like on a 2021 can you? Is it MacPherson Suspension?

[@andrewstevens7205]

How about supporting the front axle? Pretty important step to just skip.

[@allanjaybondoc6234]

The drop looks great. i like the wheels alot but i dont think wheels GR Corolla because of the breaks.

[@uReact2]

Do you get an clunking noise when turning left or right?

[@GeovanisGarage]

I get a creaking noise when turning left or right in parking lot speeds only, are you experiencing something like that?

[@uReact2]

@@GeovanisGarage na, I actually get a clunking noise going to the left only now. I gotta double check how it’s seated. The right side was definitely not seated correctly and I fixed that. So only the left is a problem so far.

[@GeovanisGarage]

@uReact2 hmmm I wonder what the issue is, try taking out the 2 22mm bolts and pull the strut towards you. I’ve seen that clunk on other Corollas!

[@uReact2]

@@GeovanisGarage I’ll give it another look once it stops raining. I’d like to add that it only makes the clunk when I’m stationery or going 1-3mph. If I’m fully moving about then there’s no noise.

[@uReact2]

I see that you have the silicone spray listed in your description. What was that used on?

[@stinger8957]

My son installed these on his GR and he says it destroyed the handling of the car. Is there anything he can do or is that part of the deal with lowering springs? Thanks in advance.

[@boiipauly]

You missed an opportunity to put “deez nuts” in at 4:40 😭😂

[@GeovanisGarage]

Wait that’s facts 😂😂😂😂😂😂

[@WhiteDiamondTL]

I was trying to do my front struts but the knuckle/entire rotor became too angled to line everything up again. Any suggestions?

[@GeovanisGarage]

Try taking it off & then when you put it back on, try to pull the strut towards the knuckle so you can out both 22mm bolts in!

[@WhiteDiamondTL]

@@GeovanisGarage turns out the axle popped out but I fixed it we good now

[@GeovanisGarage]

Awesome! How did you like the fitment?

[@WhiteDiamondTL]

@@GeovanisGarage it looks great, threw some spacers on too so it’s super flush. But idk if it’s because I’m lower to the ground but I feel like road and tire noise increased.

[@GeovanisGarage]

@WhiteDiamondTL what size spacers you put on boss? & it’s definitely because of the springs, I feel like they aren’t top knotch quality so you feel/hear more. I can’t wait RSR to drop!

[@rollajeepzjrolla5525]

How much would u charge me to do the samething to my gr

[@GeovanisGarage]

Do you have Instagram?

[@ryanarreola4169]

What’s the torque specs?

[@GeovanisGarage]

In description! Sorry, it’s updated now!

[@MikeRP3147]

You do not explain in detail how to get to that back strut bolt on the driver's side🙄😕

[@mat696969]

🔥

[@GeovanisGarage]

Thanks mat 🙏🏽