How to install EZCAD2 to computer with Windows 10 OS? EZCAD2.14.10

You can download the driver through the google drive.
drive.google.com/file/d/1rPPJ...
Software should match with bjjcz controller.So there are two software files in the link.For example,if your board model is FBLI-B-LV4,you should download "Software and driver FBLI-B-LV4".
If you need help,you can message me by whatsapp or email:
Whatsapp:[phone]
email:[e-mail]

[@KnightsArmory]

This was so incredibly helpful! Thank you 🙂

[@poormansnaps]

THANK YOU SO MUCH FOR THE LINK , YOURE A LIFE SAVER!

[@jochenproellochs3915]

Encouraged by your video I just upgraded my lasers PC from Win 7Pro to Win 10 which is still possible for free. Made a backup in case anything goes wrong, but everything worked fine and its now running on Win10 Pro. Thanks for your video! 🙂👍

[@likaiwang7288]

Congratulations.I hope you and your family happy and healthy.Stay safe!

[@marcoantonioromeromorales9950]

Thank you very much, I send you good vibes, you are God

[@thetto9672]

Me has salvado la vida, muchisimas gracias!

[@jayagyemang1846]

Thank you very much 🙏🏾

[@flatcat101]

Thank you for this information.

[@likaiwang7288]

You are welcome.:)

[@tejasmalkar8337]

Thank you 🙂

[@Rx7costas]

Likai, I have recently acquired a 20W fiber laser from a guy . He showed me that it was working before i brought it home. Now i am trying to install it. But i get the usual dongle message on the EZCAD2. Lightburn wont even find it . Model Number SH-F20, SKU USB-2OW2-US . could you shed some light to my issue? I have tried everything. even installation on different computers (windows 7, windows 10 ). The EZCAD software supplied is 2.9.9 but i tried others.

[@MaxAlbertDanteskitchen]

Likai, Im having trouble, when I look up other devices, it does not show the driver...Im a little confused with that...do i have to install something from a folder for it to show up in other drivers?

[@likaiwang7288]

Did you connected the computer with the machine with a usb cable?Please turn on the machine in the process.

[@truthbtold5690]

hello, i have the lmcusb_ipg_ CO2 version 2016. i now have an ASUS VivoBook Flip 14. Please let me know what i must do to get this version to work. I also have windows 7 running on a Virtual System incase it requires the older OS. But when i plug into computer with Virtual Windows 7 i cannot see the dongle and Lase says Unknown Device on both Windows 10 and Windows 7. Please help if you can thank you!

[@TheMatthew7893]

I understand that the driver will work with 64bit system but the EZCAD software is still 32 bit and will only use so much memory even if your system has 128 GIG of memory . So EZCAD will still give you a " Computer out of memory if you try to load a large cad file or picture. Is there any way around this issue????

[@likaiwang7288]

Yes that's the problem of this software.Ezcad 3 don't have this problem but expensive.

[@bobreichel]

I have ezcad2 14.9 and i can't open vector files. I've tried SVG and they come out with line all over the place, AI illustrator 8 nothing and, DFX just closes the program. need help

[@likaiwang7288]

Try to transform all vector files to DXF then import to EZCAD

[@robertbielecki6161]

Hi, We have the system running perfectly on the old, Windows XP PC. Yesterday we re-install it to the new machine running on Windows 10 and now it shows the message: "Can not find dongle! Software will work at demo state" We have, of course, installed the file as you shown in this video and the driver seems to be updated OK. Do you have any suggestions? Could you help us in any way? Thank you in advance, Robert from Poland

[@likaiwang7288]

Hi Robert.Do you have a new laser marking machine?Or you installed the software to a new Windows 10 based machine but the laser marking machine is old?Sorry I don't very understand.

[@robertbielecki6161]

@@likaiwang7288 Hi, we have 1,5 years old laser machine, called "QSFL-20" which worked OK on the Widnows XP laptop. Now we've switched to Windows 10 laptop and it doesn't work... Thank you in advance,

[@likaiwang7288]

@Robert Bielecki What version software do you use?For example EZCAD2.7.6. What's the model number of your controller board?For example,some people use V4 board some use Fiber-M.For fast discussion,You can also contact with me by whatsapp:[phone].

[@robertbielecki6161]

@@likaiwang7288 Hi, once again, thank you for your time. We have EZCAD v 2.14.8. I am not sure how to find the controller board model. Where should I look for it? I would be glad to contact you via Whatsapp, but please let me know your time zone. I wouldn't like to disturb you at night. Thanks,

[@likaiwang7288]

@@robertbielecki6161 No problem.I'm at GMT+8.

[@quasar8546]

Hi, i have an old fiber laser machine that has an external dongle ( USB dongle ) .. this keep giving me (dongle not found) when i install the driver .. do u have any solution for this ?

[@likaiwang7288]

Sorry we have external dongle in our fiber laser.

[@khanhcuongle9035]

How to connect laptop win xp with laser machine? Please; i used control board for marking machine v2; please!!!

[@claudiocartagena2196]

I need to download ezcad 2.5.3 a free version, it can help me where to download it

[@noureddineabouloualac7820]

hello , i already have the machine but i can't use it cz the programme work on demo version , and the dongle is not working , i think i need the driver or something so pleas help me

[@likaiwang7288]

Yes,you need install a driver on your computer.Have you solved?

[@noureddineabouloualac7820]

@@likaiwang7288 yes its solved finally it was a problem with the software, I installed an other one

[@likaiwang7288]

​@@noureddineabouloualac7820 OK.We was having holidays so sorry for the reply.

[@noureddineabouloualac7820]

@Maliniak if you already installed the driver I'll send you the software, but first you need a PC with windows 7 or 8 .

[@dcpattni]

@@noureddineabouloualac7820 Hello, above he is showing win 10.....

[@modifiedcarstatus7041]

Hello sir can you also provide ezcad3

[@mohammedalhaji3838]

i'm downloading the file but every time it tells me that the file is damaged any help plz

[@likaiwang7288]

I can send it to you by email if you can send me a email by [e-mail] Tim

[@atheist764]

Where i can find a ezcad2 software. I am from UAE

[@likaiwang7288]

You can find the driver and the software in the google drive link. drive.google.com/file/d/1rPPJrdnaQ6xEhyEjQ9_yC4owDwkOZ_Ry/view

[@mirdefgeneraltrdg7832]

WE DONT HAVE OTHER DEVICE WHAT CAN DO 3 COMPUTER TEST NO HAVE ANOTHER DEVICE

[@leylamirzaei825]

for me it always says can not find dongle when i want to instal the software? can you help me

[@likaiwang7288]

yes,message me by whatsapp [phone] or email me at [e-mail]

[@leylamirzaei825]

@@likaiwang7288 i fount the solution, but now i have another problem... whenever i connect the laser maschine with my laptop, ezcad programm is not working well, its says no response.. do you know why

[@likaiwang7288]

@@leylamirzaei825 sorry，I don't know this problem.

[@nguyenxuantuananh2410]

can you help me about the trouble " can not find dongle...", tks you

[@osamaalbouz70]

Hello can you send me the driver for Windows 10 I updated the pc to Windows 10 and the old driver didnt work

[@likaiwang7288]

Sure please download the driver through google drive. drive.google.com/file/d/1rPPJrdnaQ6xEhyEjQ9_yC4owDwkOZ_Ry/view?usp=sharing

[@osamaalbouz70]

@@likaiwang7288 hello my friend the driver didnt work

[@likaiwang7288]

@@osamaalbouz70 I can install this driver to my pc with Win10.And I send it to someone and he can install it too.Where are you located in?

[@osamaalbouz70]

Jordan

[@osamaalbouz70]

The driver worked but the ezcad didnt it only opens on demo version

[@i-ab]

لا يوجد ملف تحميل البرنامج !! ارجوك اريد البرنامج

[@likaiwang7288]

Please write me a email by [e-mail]

[@iftikharamin21]

Very help full video. I buy a chines 50w from china. All function of ezcad2 is working fine. But i can not able to save the ezcad2 settings and parameters. please help.

[@likaiwang7288]

Do you mean power,speed settings?

[@iftikharamin21]

@@likaiwang7288 No. Actually i have another lens. and i made a copy of ezcad2. in that i wanted to save the settings for my new lens. but can not able to save those settings. please help

[@likaiwang7288]

@@iftikharamin21 Did you just copy the shortcut? Or did you copy the entire folder?

[@iftikharamin21]

@@likaiwang7288 First i copy the entire folder and from that folder i made the short cut file of ezcad2. after opening it i change the work space and field value. but it is not getting save.

[@likaiwang7288]

​@@iftikharamin21 Please save the copied file to a different disk.Disk I mean C D E F memory disk.

[@user-jj8lq1nf5w]

اريد التواصل مع احد لتشغيل ماكينة ايزكاد رجاء

[@likaiwang7288]

[e-mail]

[@cleitonhenrique869]

"DEMO VERSION-ONLY FOR EVALUATION" :(

[@likaiwang7288]

What version ezcad software do you have?

[@M-ALANEED]

الرابط غلط لا يفتح

[@modifiedcarstatus7041]

Pls it's a humble request ☺

[@cleitonhenrique869]

HELP

[@modifiedcarstatus7041]

32 bit