How to Install HP CP1025 M251 M276 Fuser Replacement Instructions RM1-8780

Today we will be reviewing the removal and installation process for the HP CP1025 M251 M276 Fuser Replacement Instructions part number RM1-8780
DO NOT INSTALL OR REMOVE FUSER BEFORE TURNING POWER OFF.
Failure to power down before installing or removing fuser will void warranty
Shop for the HP CP1025 M251 M276 Fuser RM1-8780
Your HP CP1025 M251 M276 Fuser part number RM1-8780 has been built to the highest quality standards.If you are experiencing problems with this fuser (jams, noises, poor print quality, etc.), please observe the following:
If the fusers sleeve does not spin when you manually turn the gear, please do not
assume that the fuser will not run in the printer. At room temperature, the grease
applied inside the sleeve thickens and may actually prevent the sleeve from
spinning. When the fuser is installed and run in the printer, the grease will heat up
and attain proper viscosity.
Start by making sure the printer is off for at least 15 minutes and unplugged. Approach the printer from the front and open the tray door.
Repair Notes
The fuser and maintenance kit has 125,000 page yield
This fuser and kit is available at in an number of different options at Metrofuser
No page count reset procedure.
RM1-8780-000CN is compatible with:
HP LaserJet Pro 200 color MFP M276nw
HP LaserJet pro 200 color printer m251nw
HP LaserJet pro 200 color mfp m276n
If you continue to experience paper jams after replacing the fuser, replace the
feed/separation separation rollers (one in the paper tray and two in the bottom of
the printer) and three MP tray rollers. Ensure that the paper you are printing on is
within the specifications allowed by HP. For tray one/MP tray, the paper must be
between 16lb and 54lb. For trays two to six, the paper must be between 16lb and
36lb.
Metrofuser is a leading global innovator, manufacturer of printer parts, equipment, diagnostics, repair information and systems solutions for professional users performing critical tasks. Products and services include hp printer parts, printers and printer repair training. Parts include hp printer parts such as printer fusers, printer maintenance kits and other hp printer replacement parts. The company's, customers include office equipment dealerships, online retailers, repair centers and MPS service providers nationwide. Metrofuser has been named to Inc. Magazine’s fastest growing companies five consecutive years. Visit us at www.metrofuser...

[@i-Ayham]

Thanks Sir,, it's same fuser in Canon MF8280cw it's work 😁

[@BenAdams1]

Thanks. I replaced my fuser and now my printer is working again!

[@metrofuser]

Glad I could help

[@pravgeusau]

Many thanks! Quite some work to solve a paper jam problem in the fuser unit. Very difficult to get at the rollers for liberating the paper stuck. I couldn't find a way to dismantle the fuser unit but succeeded to liberate the paper stuck. That was only possible with the fuser unit on the bench.

[@metrofuser]

Glad it helped

[@proactify]

@@metrofuser hi thanks for the awesome video, I have replaced the fuser on my M276 but after turning it on it just gives me service error 79, any thought what the issue may be please ?

[@xalt.3d.designs]

Only watched this to find out how to take off the side panel, so I could access the mobo and jump a couple solder points to fix the bad rear door open error. Thanks!

[@horseshoe_nc]

What will cause the HP M251nv to now power on at all. I've already checked the power lead and power outlet.

[@taongo2116]

thank you

[@MrPacMan36]

What would be a common cause for no power? Someone gave this to me, and I've tried multiple cables to power it up. No indication anywhere of power

[@proactify]

​ @Metrofuser Printer Parts For Service Repair hi thanks for the awesome video, I have replaced the fuser on my M276 but after turning it on it just gives me service error 79, any thought what the issue may be please ?

[@amgad4000]

Hi. My printer prints blank page. Do you know the reason? Thanks 😘

[@jamisonbraly3722]

HP engineers couldn't figure out a way to make the fuser easily accessible to the general public without taking half the printer apart? Nice.

[@edmarbungque5076]

Hello sir we have 110v canon lbp 7110cw but we accidentally puluge it to 220 we have spare 220v hp n251 for parts will this help to convert the canon from 110v to 220v? Pls help

[@metrofuser]

you may be better off buying a new printer

[@anthonyquiros3951]

The printer shows me a backdoor open error and it is closed

[@metrofuser]

Hello Please contact us directly at 908-245-2100 or visit us at www.metrofuser.com/contactus

[@anthonyquiros3951]

@@metrofuser it has some cost?, thanks

[@MarthaDeutsch]

Awesome! I got my covers off. Hooray And do you have a video or information about what do do for a 59.C0 error on the M251nw?

[@dinofx35]

Don’t do what they did at 2:54. This step does not require any force if you do it properly. Remove the vertical piece first, then the bottom shifts to the side and off. I am still getting “Fuser error” after swapping the part

[@carlajohnson4171]

Thank you so much for that tip! I was struggling and couldn't quite tell how he released that in the video. Your tip made it fall out easily, A million thanks!

[@tawhidislam2795]

Thank you

[@melissamiller3367]

thank you

[@metrofuser]

your welcome!