How to install kill witch on NBS 99/07 classic body SILVERADO/SIERRA

[@jjcar99]

It's all about time inside your vehicle folks. Great way to delay and likely stop your vehicle from being stolen. Thieves don't want to search and hunt for a wire/toggle. Once it doesn't start right away many thieves bail!!

[@differentgarageprojects5656]

This is exactly what I’ve been trying to tell people it won’t stop them completely but it will give you enough time to react and go outside!

[@donh1511]

My f350 dually diesel was stolen 2 months ago at 4am on a sunday. I had a camera that caught the theft. It took the guy 24 minutes from the moment he entered my truck to the moment he started it and drove it away. That's a LOOOONG time. I think he was drilling out the ignition. I did not have a kill switch BUT if I had, he would have cranked it longer, making more noise and maybe alerting me.

[@robertmaloney2988]

Use a club also! Great visual deterrent!

[@genecardenas7122]

Bro, I've been delaying putting mine in because of so many different ways. I just did mine on a 05 GMC 2500hd. It wired up and worked just like you said. Many thanks for the video and help bro.

[@differentgarageprojects5656]

Yea theres many ways but this seems the easiest to me anyways lol. Glad i was able to help man 💯🤙🏼

[@Nolaman70]

Did mine today 2004, GMC Sierra C1500. Leave alot of factory wire on the relay side in case you need re-strip, mine was hard not to cut the copper wire. Used heat shrink solder connectors that melt on.... Worked great, thank you.

[@differentgarageprojects5656]

Thats smart right there. Great it worked out brotha!

[@robertmaloney2988]

Thumbs up!!! I also added one to my ignition switch. Etch your windows with your VIN #!! Add a tracker, mine costs 14 bucks a month. Great Insurance!!! If they open my door my phone goes off!!

[@jay-ccool8084]

What tracker do you have?

[@redhatch9862]

^?

[@meza201011]

I just did mine today on a 2001 gmc sierra, the green with white strip wire is not on the exact location as the video shows. But it is in the same area under the relay took a gamble and cut it and it worked. Ran the wire and installed switch inside cab and works great. I saw another video same method but again green/white was not in the exact location as mine but i think if you splice the green/ white wire right under the relay it should work. Thanks for the video.

[@differentgarageprojects5656]

O ok didn’t know that. I guess as long as it worked right lol. Ima pin you’re comment incase people run in to the same problem. Glad i was able to help a little.

[@fullyjuiced3681]

Wat color was wire i have 01 silverado

[@pepino961]

@@fullyjuiced3681 just did mine today, it should be the green and white wire Left side of the bolt

[@Loading321]

would this be the same for 02 models

[@justinflorek3382]

If you wanted to go super slick with it, you could pull a green wire out from another junked vehicle off the main harness. I think its 8mm or smaller to take that individual block out of the fuse panel. Pull the blue lock pin out and then replace with your pulled wire to that connector. Feed that line down through the factory harness, and route your original factory line down with the harness. Add a connector to it, and everything under the hood would look completely stock. You wouldn't even see anything different under the fuse panel. (That's really getting picky though, and I don't think anyone that is going to try steal your pickup, is going under the fuse panel). You also can do any simple switch where you can hide it. You could do a push button switch you mount under the carpet somewhere. You could find the two wires you need and add it into a fake fog light switch, fake traction control, fake onstar, or even a fake homelink button on the overhead console. Even on the seat, mounted to the frame, under the fabric. If there's a steering wheel control button you don't use, you could replace it and wire it to that. Some of you might want to consider putting a switch in a place to where even your passenger wouldn't see you activate it, (teenagers, or that guy you didn't really want to give a ride too). Nice video man, thanks.

[@jaxsonchaka4173]

POV Your here after already getting your truck stolen 😂

[@differentgarageprojects5656]

No bueno 😂

[@gargolart]

Mine almost got stolen, stupid thieves drill a little bit to much into the switch.

[@jaxsonchaka4173]

@@gargolart already had a kill switch in mine and wheel lock and they kept trying to steal it and it had nothing no speakers nothing so I sold the truck🤦🏻‍♂️

[@juniormagana1431]

They almost stole my 05 duramax but I took all the main relays off 😂 bastards

[@jomi9858]

Fk man! That's not funny! Cabron... I keep having that thought of how to fuckill in the slowest and most painful way possible the bastard who stole my truck!... Lol!

[@Xfishf00D]

Just did my 02 silverado z71 it had a pink wire next to the green with white pretty much same location...thanks for sharing

[@differentgarageprojects5656]

Glad it worked out for you

[@DaGreat81]

I’m gonna do this soon, I think just to make it harder for someone to rewire the relay wire back to bypass the Killswitch you should probably cut a lot lower into the wire as much as you can to make it inconvenient, you don’t want them to see where you made the original cut

[@differentgarageprojects5656]

Yea not a bad idea bro. Just follow the harness

[@im-that-guy-pal]

Take both of your wires and put them into a power drill and tighten it up as if they where a drill bit. Then tie the other ends to something and give it a little tension on the wires while you use the drill to wind your wires together. Also if you have wire on a spool like mechanic wire or electric fence wire..you can use a drill to make the wire straight by using the drill the opposite of how it was wound on the spool..

[@differentgarageprojects5656]

I like this right here thanks for the advice definitely gonna be using it in the future

[@JuanRuiz-ut3bj]

I did this on my 2005 silverado ss and it did the job thanks for your helpful video

[@differentgarageprojects5656]

Glad it helped 🤙🏼

[@americanboy5064]

Good video - and good for you not disclosing where to put the switch.

[@differentgarageprojects5656]

Thanks man. And yea it would of been a dead give away.

[@jjcar99]

I was wondering where I could run a switch from. Thanks for this!!

[@differentgarageprojects5656]

Glad I was able to help

[@MaadSteve]

Awesome video bro. I did my kill switch a few days ago and I love it. I can go to bed a little easier at night now lol. Another cool video idea would be installing a roof rack

[@differentgarageprojects5656]

Thanks brotha glad you liked it. And yea bro definitely a must if you’re truck sits outside. Ive thought about it bro but don’t know how it would look lol

[@lowboostedaccord4933]

I'm surprised I haven't put my in yet I like the way you looked it up better I was going to run it from the inside wire I might run it the same way you did keep up the great work brotha 🤘💯

[@differentgarageprojects5656]

Yea bro you have to do it. Its a must with these trucks. Thanks brotha appreciate it.

[@lowboostedaccord4933]

@@differentgarageprojects5656 no problem brotha

[@rickbenavides1349]

Awesome video Brother....Gonna do my 2001 GMC Yukon.....GOD BLESS

[@eclos18]

Hell yea bro Thank you!!! 🍻Just got done putting one in my Tahoe!

[@differentgarageprojects5656]

Glad it helped 🤙🏼💯

[@ericcobian5359]

Nice job, I am going to do that on my 2002 avalanche.

[@Davidriveraz71]

I will be doing this. Thanks for the video I was planning on doing this but on the actual fuel pump but don't wanna lift the bed

[@differentgarageprojects5656]

Yea no problem brotha! Glad i was able to help.

[@Nathan-wf1pr]

I was thinking about that, was just watching a fuel pump replacement vid and thought why not splice into the fuel pump wire somewhere between the pump and the cab more or less? Is it still a dark green wire I wonder.

[@joshlovelace8234]

Good video, will be doing this to my 2000 Sierra soon. Keep up the content your truck is sick!

[@differentgarageprojects5656]

Thanks brotha 🤙🏼

[@nickvalenzuela2424]

Thank you brotha,, quick and easy video of showing how. 👌🏽

[@differentgarageprojects5656]

Glad it helped brotha

[@adamwest3637]

I got a 02 Silverado and I just ordered a 22 ZR2. I wonder if it will be as easy as the older style Chevys

[@ernestopineda4996]

thank you so much for this video, my truck got almost stolen couple days ago, this will help me at least to cut the fuel pump

[@differentgarageprojects5656]

Yeah no problem I’m glad I was able to help.

[@elgarfio4186]

Thanks brother 🙏, well explained and simple 👏God bless!!

[@differentgarageprojects5656]

Np brotha. Glad it worked out for you.🤙🏼

[@805r4god]

Thanks Bro I will do mines today, Chevys be getting stolen her in Oxnard.

[@differentgarageprojects5656]

Glad it helped! And yea there getting stolen alot now!

[@alexengland104]

Loved it. Short sweet and simple

[@jf1poke]

Chingon thanks plain simple and should work great

[@differentgarageprojects5656]

Glad it helped brotha

[@bryangarcia9318]

No one gonna jack the yonke no more 😂👍appreciate the vid

[@differentgarageprojects5656]

Hell yea glad i was able to help 🤙🏼

[@STEVEEDG]

Does the switch get hot when the truck is on? Is there alot of amperage on the relays? I usually take my fuel pump relay out and it gets pretty hot after a drive.

[@differentgarageprojects5656]

I wouldn’t know I haven’t touched the switch since I installed. It wouldn’t know if it gets hot but I’ve driven the truck six hours straight no issues with the switch.

[@gustavoplata9349]

Yo bro I bought i truck with a kill switch already in it; is it supposed to drain the battery pretty fast? After a few days of me not turning it on it completely dies and needs to be charged or jumped

[@gustavoplata9349]

Even if the kill switch is on^

[@differentgarageprojects5656]

I don’t think the Killswitch has anything to do with your battery dying. My truck stays parked with the kill switch for weeks and I can go turn it on like nothing so I’m thinking you have another issue going on.

[@juansegura5593]

They just tried to steal my tahoe and silverado 2 days ago and it never came in mind to install this good thing i had a alarm system tht woke me up

[@cantgetright4564]

Will this work but instead of fuel pump relay i use the ecm ignition so it doesn’t crank?

[@differentgarageprojects5656]

I believe you can. Im sure someone here on KZbin has a video on it

[@Nathan-wf1pr]

.Thanks for vid. How do you lift up the fuse panel like that? do you undo the frame brace?

[@differentgarageprojects5656]

Thanks and im tubbed up front so i had to raise it up when i did that.

[@jorgee-albertoo3enm695]

I have a 02 Silverado I just got that 4 months ago and I really need a kill switch

[@williamclover8861]

Can you do a video where instead of a toggle switch you have a Momentary switch and a relay and when you crank key and the switch is not pressed the car doesn't start and the horn sounds.

[@mynameisgus1]

How do you get the wires through the firewall?

[@larrydiaz5423]

Chingon ya tenía días pensando en como hacer esto para mi troquita ya que llama mucho la atención la tengo ahorita en mexico afuera de la casa y tiene bastón pero como quiera .. así ya podré dormir mejor y no es algo que quisiera que un mecánico instalara mejor yo mero alcabo tengo poquito conocimiento en mecanica pero no tenía idea de por dónde empezar muchas gracias bro..

[@differentgarageprojects5656]

Denada para eso estoy para ayudarles. Por k ya ve k si se rekiere si la troca llama la atencion. Y si esta bien facil nomas escondalo bien 🤙🏼💯

[@melindaortiz9741]

Zzz

[@Davvidd702]

Still good? Doesn’t mess up fuel pump?

[@differentgarageprojects5656]

Going on 3 years no issues

[@Davvidd702]

@@differentgarageprojects5656 thanks for the reply

[@eltoro5866]

Is this safe? What can happen to the trucks fuel pump in the long run?

[@differentgarageprojects5656]

Nothing happens. Ive been on long trips 8 hours run and all good

[@ortizdominguez4190]

Appreciate it the vid 🔥💯

[@differentgarageprojects5656]

No problem. glad i was able to help.

[@robertgonzalez5518]

1pqq

[@leotorres1603]

Do you think it would work on a 98? Just looking for the same fuel pump relay wire?

[@differentgarageprojects5656]

Yea should work but wiring might be a different color. Take a look under the fuse box

[@chrisc7639]

Does it matter what volt kill switch

[@abl6965]

Would this work even if they bypass or use a jump wire pin 87 and 30 on the relay?

[@differentgarageprojects5656]

It should since by doing this you’re cutting the power to the fuel pump.

[@justinflorek3382]

Well he did to the right connection. If he would have done it to the ground, then you could. Since he did it to the hot side, then you can't just jump it. Even if you jump the relay, the main power wire to the pump has the switch on it.

[@abl6965]

@@justinflorek3382I’ve tested already and you can turn on the truck with a jumper. His switch is not on the hot side, that wire sends power just to relay not the pump itself. Still effective to stop the average person since most aren’t going to try and figure out why its not starting.

[@DGG-xw1wj]

Is it the same process on the 07-13 models?

[@differentgarageprojects5656]

I wouldn’t know bro.

[@DGG-xw1wj]

Thanks I’m assuming it must be similar.

[@differentgarageprojects5656]

@@DGG-xw1wj yea more than likely. I just didnt want to lie to you and say it is the same. But should be similar

[@Catholic1391]

You could tap into that wire inside the cab.

[@ricksasek5483]

Great job thanks for the info

[@Dahomie15Hp]

When you wire it to the relay can you wire it from the top?instead of from the bottom?

[@differentgarageprojects5656]

No it has to be from the bottom

[@Dahomie15Hp]

Oh ok I just didn't want to go through the wires and get them confused

[@differentgarageprojects5656]

@@Dahomie15Hp its pretty simple and easy

[@exbballfan]

This dont stop the real car thieves. They use Tow Trucks like the Repo Man use.

[@differentgarageprojects5656]

Yea I agree. If they really want your truck or car they will take it no doubt

[@buttonmasher9439]

Do you got a video on your intake I like the set up would like the pros and cons on that set up. Thanks for the video im gunna do this to my truck forsure there always going missing up here in Canada 🇨🇦

[@differentgarageprojects5656]

Glad it helped you out definitely a must. And i actually don’t have any videos on it but all it is is it 4” filter up front. And then a mass air flow sensor. And a intake boot to the throttle body. Nothing special

[@differentgarageprojects5656]

Only reason i did this setup is because im tubbed updront

[@buttonmasher9439]

@@differentgarageprojects5656 did you use the stock mass air flow sensor

[@differentgarageprojects5656]

@@buttonmasher9439 yea

[@buttonmasher9439]

@@differentgarageprojects5656 hey thanks for the help and replaying to me

[@billwest5330]

What size amperage is for the kill switch for the main ground wire off of the battery?

[@differentgarageprojects5656]

This is the switch i bought. www.ebay.com/itm/233700469336

[@anthonyjorge126]

Black need to cut it or leave black on it ? Because I follow your way ?

[@differentgarageprojects5656]

If I remember correctly you leave the black one alone and only mess with the green one

[@Error343434]

Do you have to ground any of the wires?

[@differentgarageprojects5656]

No

[@joehernandez9717]

Mamawhiskies or La moneyMaker Comes in handy after getting my express van snatched

[@differentgarageprojects5656]

That sucks and Yea definitely a must bro. Glad it helped

[@LH-zn3jg]

Great video. Thank you!

[@luxurnathan4353]

my just keeps cranking what do u think it is?

[@differentgarageprojects5656]

If it started doing that after trying to do this mod most likely a bad switch or wires and connectors aren’t secure good enough.

[@jamesterrell9589]

Doing my 96 Chevy in the morning 🤞🏻

[@differentgarageprojects5656]

Good luck brotha 🤙🏼

[@tahoemob7305]

I just did this on my Tahoe about a week ago. Now my fuel pump has went out. Bad check valve. It is less than 2 years old. Is this just a bad coincidence or did this mod cause it

[@differentgarageprojects5656]

Personally i would say a bad coincidence because i have this on all my trucks and been running it on my white truck since i made the video and haven’t had any trouble. Just make sure wires are secure nd not touching anything

[@jg01lox]

Simple video gracias vato!

[@differentgarageprojects5656]

No problem homie

[@cesarchavez5089]

I did this and now my driver side turn signal doesn’t work. What could be the problem ?

[@differentgarageprojects5656]

I wouldn’t know brotha. Must of cut an extra wire. I would go over you’re work to make sure.

[@sonidouniversal7833]

Thanks awesome tutorial 👍

[@differentgarageprojects5656]

Glad it helped you out. 🤙🏼💯

[@ruben05chevy_sanantonio22]

Good shit bro big help thanks

[@danielmachado7477]

appreciate it brotha

[@jesse29051]

Is there a kill switch u can do for a battery so it won’t drain

[@differentgarageprojects5656]

I believe there is but it’s not really made to be used in that form people use them a lot for race cars when they want to cut off the power it’s a heavy duty switch

[@rgs4x]

$25 in parts and about 3 hours. Hardiest part was finding a good spot for switch, 05 Silverado.

[@differentgarageprojects5656]

I agree finding a good spot was hard

[@Raulc713]

Where did you buy it?

[@kbbeatriz7]

Won’t the Killswitch get hot because it’s constantly running power through it????

[@differentgarageprojects5656]

It doesn’t get hot at all.

[@ashleylira6480]

have you had any problems with it since ?

[@differentgarageprojects5656]

None at all nd we daily 2 of our trucks with this set up

[@popeye1313]

What's a couple good places to put the switch

[@differentgarageprojects5656]

You just have to find a good spot bro. Cant really help you there

[@l.w.f.c3291]

Thank you

[@juanmoreno5187]

The black one is hooked up to what color I know the white one is to the green one

[@differentgarageprojects5656]

You only cut one wire underneath the fuse box which is the green with white stripe. the 2 wires i used used are hooked up to each end of that green wire up to the switch

[@juanmoreno5187]

@@differentgarageprojects5656 oh alright so the green wire goes to the switche and the other wire to but gots to be hooked up to that same color tho the green

[@differentgarageprojects5656]

@@juanmoreno5187 no problem yea pretty much. All you’re doing is cutting green wire with white stripe in half and extending the wires to the switch. One cable on each side of switch. Then you have the ability to either turn off power to fuel pump with the switch being of position

[@juanmoreno5187]

@@differentgarageprojects5656 aye so my red is going to the green wire where does the other wire go to.?

[@ginocruz6237]

Do you know what the switch interrupts exactly?

[@differentgarageprojects5656]

Fuel pump relay

[@Legendary_Frank]

Is their a way so that the starter doesn’t get worn and or battery dies

[@differentgarageprojects5656]

Not really. You can try wiring the kill switch to starter but that’s pretty much it

[@j.a.lucky13]

I put mine on the ignition fuse in that same box in the engine.

[@LandonJP07]

I have a OBS Chevy, and can’t get under my fuse/relay box to access the wires.

[@differentgarageprojects5656]

This will only work for 99-07 NBS Style

[@tomzanoni1939]

02 Chevy Slvrdo LS, flipped over fuse box and wiring is close but not the same. Now confused, will search down fuse relay colors to confirm

[@tomzanoni1939]

Someone else had close to enough vid with same wiring as mine. Looks like he used the green wire with white stripe though it and wired switch to just that one wire.

[@obsant7214]

Mamawhiskeys 🤣 shit had me weak u definitely helped out a lot thx compa

[@differentgarageprojects5656]

Lol 😂 glad i was able to help brotha 🤙🏼

[@jesusmaldonado317]

What kind of wire did you use? What size?

[@differentgarageprojects5656]

16 gauge

[@alexdelgado422]

Thank you brotha

[@differentgarageprojects5656]

No problem glad it helped

[@typicalbryan0220]

Does the amps for switches matter?

[@differentgarageprojects5656]

I believe it does if you scroll through the comments you might find the link or info to them.

[@valerie4795]

Thanks that shit looks easy hell YEAH

[@MACKIE4890]

When hook the wires from fuse to swith does it matter or not!

[@differentgarageprojects5656]

If you’re talking about the relay it does not.

[@MACKIE4890]

@@differentgarageprojects5656 so one I cut the green wire I can run one wire each from the spit green wire and how do I connect to on off swith ? Thanks

[@differentgarageprojects5656]

@@MACKIE4890 On the video it shows how I did it I believe. All you do is connect it to the switch directly

[@differentgarageprojects5656]

That is correct

[@MACKIE4890]

Figured it out thanks 👍

[@ingatmd8089]

Esos tacuaches andan con todo

[@differentgarageprojects5656]

Awi wi les vale all los cabrones

[@3SRT3]

Great vid 💪💪

[@differentgarageprojects5656]

Thanks 🤙🏼

[@dannylsx7137]

Chingon el video compa 🔥

[@differentgarageprojects5656]

Gracias biejon. 🙏🏼

[@rockydave21]

How did you get to Install that air intake ?? !

[@differentgarageprojects5656]

All it is, is the filter up front nd mass air flow sensor. Nothing fancy

[@Fkidd702]

Would it also be a green color wire on a 99

[@differentgarageprojects5656]

I believe someone said was a green and white wire don’t really remember but I’m sure you will find it in the comment section. Also I think he said it’s not in the same place but it is around there

[@214Turo]

Will this work on a ‘01 Suburban bro ?

[@differentgarageprojects5656]

I believe it will just wire is in a different location but in the same area if that makes sense someone commented that it was in a different pin location

[@214Turo]

@@differentgarageprojects5656 alright sounds good👍

[@ebojesus4667]

Do you got a link to everything you needed to do this?

[@differentgarageprojects5656]

I don’t its been a while since i did this. But if you scroll through the comments you might find the link to switches dont know if the add is still active tho.

[@popeye1313]

What amp toggle switch I went to the auto parts store nearest probably 10 different types

[@differentgarageprojects5656]

Regular on/off switch make sure its heavy duty at least 15amp

[@popeye1313]

@@differentgarageprojects5656 can I get a three leg toggle switch and hook one up to the horn so that when they go to start the truck and it's not starting the horn will sound

[@popeye1313]

@@differentgarageprojects5656 and can I do that all off of what you showed in your video of the fuel relay in the fuse box

[@differentgarageprojects5656]

@@popeye1313 Don’t know if that would work with the way i showed.I’m sure you can find another video on KZbin. That will show you how to do what you’re trying to do.

[@AnguloRecords]

Good one 👍🏻

[@benitkutchka9663]

I'm fixing to do my truck when it gets back from the shop. It was stolen 2 weeks ago and they trashed the transmission.

[@subelejamz2038]

This shit works bad ass video te debo un dosesillo jefe 🤣🍺

[@differentgarageprojects5656]

Ill take a 12 pk de modelo porfavor 😂. Glad it helped bro.

[@josevaldez4482]

Thanks g

[@20589]

Whered did you get the kill switch kit ?

[@differentgarageprojects5656]

www.ebay.com/itm/233700469336 I bought the toggle switch on ebay and did my own wires.

[@gaspararmandoverdequinones3044]

Heavy Duty 10A Ignition Cut-Off Switch?????

[@sakudofoe]

where did you put the kill switch?

[@differentgarageprojects5656]

That would completely defeats the purpose of me installing it 🤣

[@956bullypits3]

💯💯💯💯💯

[@gaspararmandoverdequinones3044]

you have the link where you got it from???

[@differentgarageprojects5656]

Link should be somewhere in the comments brotha. I gave it to a few people when i recently did it.

[@ubvo]

I’m gonna do this

[@davidbollier3859]

Why not tie it to starter? Asking before I do mine.

[@differentgarageprojects5656]

This is just one way of doing it you can also do it to the starter

[@Nolaman70]

You'd need a bigger switch, it would burn up. Just did mine to the fuel pump relay, like in this video, works great.