You are a life saver, mate. Gigabyte's manual is so crap, they still show a screw for holding the m2 SSD. I'm all for screwless solutions, but dear God, why can't they put it in the manual? It even looks like something you should be turning, not pull out...
@ladiosaaqua344510 ай бұрын
Exact!!
@michaelcamp56988 ай бұрын
Hell same shit hes a lifesaver haha
@War_Jugger8 ай бұрын
Same here thank you very much
@redvic837 ай бұрын
didn't even get a manual with ssd instructions
@jakublukes18296 ай бұрын
Thank you so much 😊
@MikeVossen11 ай бұрын
A video that’s under 2 minutes that simply answers a question, how refreshing. Thank you this is perfect!
@jamesgtoxed66697 ай бұрын
My gigabyte manual didn't even write anything about this plastic clip, was scared of breaking it but this video showed me the way to open which i never would have guessed otherwise!
@isitaduckorachicken604 Жыл бұрын
Thank you! Had a feeling I was supposed to pull it up but was scared it was gonna snap off
@ktnjared8 ай бұрын
Thank you! I suspected that this was the process, but needed to be sure! Straight, to the point, no fluff, and intructive. Seriously, thank you so much!
@mdanov7 ай бұрын
30+ years building computers and I'd never guess this one. Thank you!
@bahahytham75799 ай бұрын
Omg you saved me !!! After all these hours I found you
@k2ngcorn5 ай бұрын
*hours?*
@barndweller457310 ай бұрын
Thank you for the video, I was lost. What a crappy design! They saved 1/2 a penny and will have this broken plastic part be the end of motherboards!
@nomichlokin20307 ай бұрын
Very instructive video. I was looking for this kind of video of how to find the 2nd NVMe slot of a Gigabyte motherboard. Thank you so much BarTech TV!
@ArnieOCElol13 күн бұрын
Honestly so thankful I really had this problem and you just helped me build by first ever pc
@kayqueoliveira5980Ай бұрын
This helps a lot, i have a a520m and have this plastic clip in it, but the manual says nothing about it, thanks a lot man.
@haemoolkarlguks37546 ай бұрын
Thank you so much. I was troubled with what to do, but I solved it at once after watching this video. It may sound strange because it's a translator, but I'm writing because I really want to thank you.
@АлексейЛавринович-ь4о7 ай бұрын
The best guide I ever seen! Clear and consice guide thx u a lot!❤
@Андрей-щ4м6к4 ай бұрын
Thanx, bro!) that was really simple, but i broke my mind before found your video!!)
@stephenhill6791Ай бұрын
I've been building PC's for over 25 years and used to love Gigabyte. But now, I'm ready to switch to another brand that cares bout their users!
@Sphyxx10 ай бұрын
I was so lost witgh this mechanism the manual said nothing about it 😂 Thank you for making this video! I first rotated it where it kind of attached like a clip but it did not feel secure so i had to check what it was.
@leeleegadget Жыл бұрын
Thanks for the video, always seen screws and your video helped 100%
@samglover2246 Жыл бұрын
I was about to lose my mind before I found this. Thank you!
@felipekuchnier Жыл бұрын
Thanks friend, it was hard to find this info
@awcio4079 Жыл бұрын
thanks god that i made it 11 days latter, thanks bro
@جسارالغامدي-د8ت2 ай бұрын
Thx bro i just bought an gigabyte motherboard and i didn't know how to install it❤❤
@RobertPucovsky8 ай бұрын
Thank you! I had trouble figuring out what to do with the plastic clip but it turns out you need to just pull it out.
@ivanlimzg Жыл бұрын
Your video really helped. I was sweating the whole way through esp with the last part with the clip
@westfield905 ай бұрын
Thank you so much. I was literally going nuts trying to figure this out.
@FloridaTesfay7 ай бұрын
Thank you so much, I almost broke my pc because I was pulling on it so hard and got frustrated. This saved me my pc, thank you 🙏
@dsvob11 ай бұрын
not all heros wear capes.. thanks for this informative video
@ThunderBolt-j4j Жыл бұрын
Jesus bro, we have the same board and i was absolutely going crazy the last hour, thank you so much for this, i was really just going to break them off completely, it's super dumb!!!
@ArtrexSt5 ай бұрын
I almost break this Plastic Clip You save my MB thanks so much! :D
@Manuel-xi4ju Жыл бұрын
Thank you so much, this is my first time building a pc and i thought that i got the wrong motherboard hahaha
@azuresstuff Жыл бұрын
thanks I was so confused on what the rubber thing was I didnt realize that the weird bit pops off I thought I had to somehow wrestle the whole rubber part off thinking it was a cover for a screw or something
@nomichlokin20307 ай бұрын
Could you give us a video how to install a heatsink with thermal pad on that drive with plastic clip?
@NajmiAriff4 ай бұрын
have u figure it out?
@mentiquebakabila42543 ай бұрын
@@NajmiAriffIt did instal it, only the handle now had to face the other way, but I didn’t have PCI port in front of it (unlike this one in the video)
@Spoolingturbo6 Жыл бұрын
here interacting with the algorithm - showing support thx for the vid. keep up the good wok
@DrReverendJ10 ай бұрын
Thanks for the video! I was afraid I was going to break the clips by pulling on them.
@war71b12 ай бұрын
Thank you! Greetings from Rio de Janeiro, Brazil
@BartechTV2 ай бұрын
Vlw vei. Abraços do Porto, Portugal.
@richeeze7 ай бұрын
Legends say, without this video I would still be rotating that clip, hoping one day it unscrews.
@CreasyTLT Жыл бұрын
best videos for that particular issue, thank you!
@non26382 ай бұрын
So, the plastic clip won't close. I have my ssd already installed and it's a bit inclined so I tried pushing the little thing like you showed in the video, but for me it opens again a bit. What should I do? Is one of my ssd slots on my motherboard fucked?
@ransomrider97036 ай бұрын
Just saved my life bro 🙏
@TEK4_YPR Жыл бұрын
I broken that clip 😥😥, any solution?
@freddiemurphy579525 күн бұрын
i love you my lizard rangos pc needed an upgrade and everyone else was unhelpful, love u
@Leequidude10 ай бұрын
Thank you! I've just looked up about installing ssd and mine is a gigabyte motherboard as well and I find that this type of installation is kinda weird that it's just being held by a plastic clip while it's constantly resisting being pushed out.
@paullillico23109 ай бұрын
I'm not loving this new way of holding an m2 seems really flimsy and probably gone be a fail point somewhere done the line
@Leequidude8 ай бұрын
@@paullillico2310 i just installed my 1st ssd and it was a horrible process cause of this poor design because I will have to remove my gpu first because it's just simply impossible if you have adult large hands and there's no room for your hands to re attach the plastic pin once you have the ssd, like sheesh. Horrible design idea.
@Vikiking29 Жыл бұрын
Thanks man. You are amazing ❤
@1ifx16 ай бұрын
Thanks bro this was so helpful I really appreciate it❤❤❤❤
@darshmki5 ай бұрын
SAVED MY DAY TYSM BRO
@dancusovier27197 ай бұрын
That bit that the clip is connected to, what does it do?
@deivysongomes53283 ай бұрын
Thank you, you're a live saver
@eemacedo5 ай бұрын
You save my life. Thanks
@nomichlokin20306 ай бұрын
Is it possible to install heatsink on that drive with plastic clip?
@gordonx1454 күн бұрын
thanks very much . i was totally stumped
@spleenKidHarmony9 ай бұрын
I didn't know what to do with those. Thanks
@PetarSeleАй бұрын
How to apply sata to it?
@nielsay85795 ай бұрын
Bro I simply love you
@mrcreebert78296 ай бұрын
Hey i have a problem, my plastic clip simply refuses to clip back on place once i try to reinsert it? This is the first time im installing an ssd but ive done everything right?
@simpleguy38 Жыл бұрын
Thank God you save my life 🙏
@203232crash10 ай бұрын
Thanks. Lol I have heavy hands and never seen this style before. Didn't want to break.
@danieldixon68583 ай бұрын
Thanks was having issue with it before watching the video thanks
@wholelottagangshid6 ай бұрын
Are we able to install an ssd with a heatsink? It would be nice to know as im in the process of buying an ssd with a heatsink
@mentiquebakabila42543 ай бұрын
I did install, only the handle now had to face the other way, unlike here there was free space and not an PCI port in front, so lucky for me
@oscaretum6247 ай бұрын
Thanks a lot!! My hero!!
@geraldtastic11 ай бұрын
do all the plastic clips have a built in pin
@BartechTV11 ай бұрын
Yes it's a new industry standard so they should all be the same.
@the_1st_god_me26 күн бұрын
I need help mine is about to break and it didin't even move how do I take it out😭
@michaeltm52827 ай бұрын
Thank youuuuuu haha, its my first time with pc
@paulribera5502 Жыл бұрын
I got a crucial p5 plus with heatsink, no way to attach it to gigabyte b760m ds3h ax ddr4 😢
@marfa2338 ай бұрын
Thanks! Lifesaver!
@tsunamisantista6683 Жыл бұрын
saved my day. thanks
@Antares-dw9iv7 ай бұрын
Jesus Christ Gigabyte if you're trying to reinvent a literal screw at least put it in your documentation. Not in a million years would I have guessed that that's how you use it.
@md.shahriarhossainalvi5504Ай бұрын
Mine is stuck. I have tried to open it for loke 30 minutes but couldn't open the pin😢
@propotatolover7773 ай бұрын
Ty so much, I love you
@SkippityFlippity9 ай бұрын
Mine doesn’t click down because I have a heatsink attachment over my ssd
@AntonioSalazar-db1eb7 ай бұрын
thanks, I was wondering how to!
@Ciiads4 ай бұрын
❤❤👌👌
@FurorPacifista6 күн бұрын
Thank you very much!
@Jwebbplayz9 ай бұрын
I was so weirded out when I saw these clips..
@camilodipierri90915 ай бұрын
menuda leyenda❤
@josefMarbaise3 ай бұрын
Thanks dir The tips Amazone
@icystalin294111 ай бұрын
Great video, simple and perfect!
@thelonelydekuscrub481711 ай бұрын
You saved my life
@skatermdq3 ай бұрын
Crei que los plásticos eran para tapar un posible hueco para tornillos, y al hacer tanta fuerza los arranque 😢
@alejandrosordo83198 ай бұрын
Thanks friend !
@KevinBorg-tx3rd11 ай бұрын
Thank you soooo much!!
@ChristianRusso-l3x Жыл бұрын
super cool and easy but I feel like it breaks off then you have to use tape or other bs.
@BartechTV Жыл бұрын
Yes, true
@sweetie_pinkie_2 ай бұрын
omg u just saved my life
@angelodorado808510 ай бұрын
very usefull men, thx
@djsmileyoflasvegas10 ай бұрын
Wow i almost pulled it out completly😂been awhile since i built a new computer
@paullillico23109 ай бұрын
I did ,lucky I didn't snap the plastic fittings so popped straight back in 😂
@Pernas11heat26 күн бұрын
i lost 2 hours trying to put the large part of the clip below the M2 vertically and cannot put the stick on it. I was so desperate. Thanks
@hubertniedbala65299 ай бұрын
Thank you!
@topdamagewizard11 ай бұрын
I was like WTF is this M8. When I opened my board. Thanks
@ekashotersen10 ай бұрын
Save my day.
@truthix10 ай бұрын
THANK YOU SO MUCH
@grilledbanana3564 Жыл бұрын
Can it be replaced with screws?
@BartechTV Жыл бұрын
You'd have to remove the plastic connector completely from the board, and screw in a brass standoff where it used to be.
@XZYZ0R11 ай бұрын
Lol thanks alot I rotated it and it fits then but the SSD can pop out easily then so I thought I can use tape on it so it can stay into there right. But I already was thinking there should be something else on how to do this. Pretty dumb that they dont have this shown into the mobo manual.
@bersspon325611 ай бұрын
Thank you very much :) The manuals are indeed not great haha
@fradiavalo666 Жыл бұрын
This video did help 😂😂😂
@frydenx11 ай бұрын
Thanks
@davidepalombo21418 ай бұрын
thanks!
@snipezleontv227311 ай бұрын
Thx man
@KapitanOppa9 ай бұрын
thanks
@uniaobrunome1408 Жыл бұрын
JEEEZ THANK YOU. HOW THE F ISN'T THIS ON THE MANUAL?