How to Install Morimoto XBT Bluetooth Controller

[@marksarucam4821]

Which fuse location are you using to power you BT controller

[@z.dato66]

Appreciate you making this bro. Really helped me out

[@FuRRyS8eR1]

How did you power 5 different hot wires into the fuse piggyback? ( L/R) demon and halo rgbs plus Bluetooth controller

[@samahmed9496]

I snipped the ring terminal and did the fuse tap method now it's not powering on ..any ideas?

[@luisishere987]

Hey my retrofits are having an issue. The halos only change from a small range of colors like blue or green. Any idea??

[@kevinragnauth5574]

Having the same issues we're you able to figure it out?

[@luisishere987]

@@kevinragnauth5574Hey! Turns out my controller was defective. Warranty covered a brand new one. New one works perfectly now!

[@luisishere987]

@@kevinragnauth5574you can also try disconnected the controller and reconnecting. Also try deleting and reinstalling the app. If that doesn’t work then I’d contact whoever sold it to you

[@audelacosta2205]

What fuse did you get power?

[@Kyle.McFarlan]

I used a fuse that came on when you turned the keys on . I think it was the hazards

[@marcdiver5051]

Huge question so I have a set of headlights with x halos and an led strip the problem is only one side could hook up both halo sides only the driver side LED would work though because the controller couldn’t reach the passenger side I tried splicing a wire in running from the controller to the led strip connector on the headlight and I think I may have broken it because now my blue tooth doesn’t work on the controller and I also can only turn off my headlights by taking out the fuse in the wire I think I may have broken something 😂

[@snipes110]

So if I have 2 different brands of lighting (halos one brand, rock lights another brand) both controlled off different apps, can this be used to control them both on one app at the same time?

[@dennior1234]

where did you buy the drivers at?

[@HellinBack]

I don't have mone going to a direct inline fuse piggy back given my battery being in the front it would prob be smarter if I did , but I just ran a wire to my fuse box that works when the key is on , seems okay.

[@hunterschaumleffel2143]

Any battery draw issue ?

[@HellinBack]

@@hunterschaumleffel2143 not at all.

[@hunterschaumleffel2143]

@@HellinBack you hooked yours to the battery or fuse box?

[@HellinBack]

@@hunterschaumleffel2143 both in a sense but mostly fuse vwe have a fuse that is called the convertible top fuse I don't rekber the exact number but it's only triggered whenever you turn your ignition on.

[@hunterschaumleffel2143]

@F0cus did your drivers have a light blue wire coming off them then the fuse thing on the xbt box? I'm just tryin to figure out if I can power the xbt box with the multi link fuse that plugs into the fuse box with a wire coming off and 2 fuses that go in the top and then it'll power the box then thayll power the demon eyes too ?

[@AntonioClaudioMichael]

Great video I'm doing this 9n my truck wasnt sure how the bluetooth worked thanks for the information

[@that_jdm_dude9218]

Where do I connect the wire for the demon eyes?

[@chriztoph3rhammer750]

Where did you get the piggyback fuse wire from

[@Kyle.McFarlan]

Chris Hammer advanced auto

[@chriztoph3rhammer750]

How much amps fuse should I get

[@Rouchextreme]

Hey man great video, I have a question how did you connect the other headlight? Did you use two controllers?

[@Kyle.McFarlan]

Edward Rocha the head lights connected to a harness , the demon eyes and halos had long wires to reach to the Bluetooth controller

[@Rouchextreme]

@@Kyle.McFarlan yeah but my question is for controll the demon eyes and halos for left and right did you use two XBT controllers or did you use a splitter?

[@Kyle.McFarlan]

Edward Rocha oh it’s one controller . And it can power 3 different Accessories

[@thombyrne8329]

Thank you for posting this Video! Helped a lot!

[@michaelstatia4493]

Does your controller still work? I just bought mine and it won't pair at all. I read after the update almost no one can connect to it

[@Kyle.McFarlan]

Michael Statia really. Yeah mine still works . I just have to turn my Bluetooth on then go on the app and give it a sec for it to connect . Other wise try clicking the the pair new button

[@tylerdurden4248]

Smarter to piggyback it to a fuse that only comes on when the key in the car, that way any fire 🔥 issues you’ll be able to do something about it

[@Kyle.McFarlan]

Tyler Durden that’s exactly what I did . The Bluetooth controller comes on when car turns on

[@albertolandy7975]

what size are the angel eyes

[@Kyle.McFarlan]

70mm

[@TaPzGaming]

Would it be okay to run it directly to my battery? I have it in the front of my truck. Or should I run a remote turn-on wire?

[@Kyle.McFarlan]

JordonThePro Gaming you could try it directly to your battery . I haven’t tried because I wasn’t sure if the light on the controller would drain the battery or not.

[@MegaBad2dabone1]

You can run it straight to 12V but I ran mine through a switch from the battery

[@tonyandcandice]

@@Kyle.McFarlan it doesn't seem to drain much, mine are 24/7 powered and the LED channels remain off until i set a color

[@PunjabiKush]

You could of done the alternator positive

[@PunjabiKush]

Not to knock what you did. You did an amazing job!

[@ephraimkaravan]

Do I need a degree in electrical engineering in order to do this without fucking up my headlight or battery or fuse box?

[@shmaymondshmoos5180]

not this part, if your headlights are worth anything at all I'd send them in to somone if you dont think you can manage it. I just got mine back from the shop and finished doing all of the wiring in the car by myself. Theres a bunch of custom headlight tutorials on here if you wanna try it though

[@jeffgriffin553]

What's the Bluetooth code for it?

[@MachuPichuu]

let me know if you figure it out. looks like there is issues on android 8.1 on the app and the NFC pairing wont work. so I'm trying to pair it manually.

[@oscaraflores09]

Matt Earle did you figures it out on how to connect it? Mine is doing the same thing

[@jeffgriffin553]

You have to ground the switchbacks, you don't have to wire the positive up to make it switchback but the ground has to be connected, after that it paired. Hope this helps

[@MachuPichuu]

Oscar Flores you have to go into app permissions and enable location permission for the app. Then it paired right up. Apparently location permissions are linked to the NFC on your phone.

[@MachuPichuu]

Jeff Griffin Yes, this didn't seem to be in the instructions. Mine paired without the signal ground but the lights didn't work. They were barely lit.

[@1_sick_taco252]

I need help lol

[@marksarucam4821]

what projector size is that? thank you