You safety wire the halos on, sweet! Great idea, I'm an aircraft mechanic and that's a bread and butter job for everything we attach haha
@RetrofitSource6 жыл бұрын
Safety wire everything!
@therealjdub3 жыл бұрын
I like this idea because once my halos go out, whenever that happens, I can easily remove them and replace with new ones. I might even prefer this method for my sequential drls since I'm opening my headlight housings anyway to black out the chrome and install halos/drls. Both the halos and the drls have 3m tape on the backs of them but I don't think Im gonna use it now. I greatly appreciate this tip because now if I have any issues with the lights I can easily replace them. Awesome!
@RetrofitSource3 жыл бұрын
Happy to help!!!
@TheKingOfHalo2 жыл бұрын
My original XSB halos from 2017 are still going strong. I use them about two hours a day too. Even more on the weekends.
@LeandroFTW8 жыл бұрын
Genius! I've been using double stick foam tape all these years.
@junehp35072 жыл бұрын
great video guys...
@RetrofitSource2 жыл бұрын
🤘🤘🤘
@gazeaston31778 жыл бұрын
Sikaflex is good if you want to bond them on.
@shivangpatel71163 жыл бұрын
Can you please attach the link for picture hanging wire. Thanks
@RetrofitSource3 жыл бұрын
We read you!!!! www.theretrofitsource.com/halo-installation-beading-wire-A-BEADWIRE?quantity=1
@iidrinkiismoke4 жыл бұрын
Video is incomplete. Doesn’t show how to install a halo completely. You have wire for the halo sticking out, how do you run that wire behind the shroud ?
@slowbryan06158 жыл бұрын
what mm size halo ring would i need for mini gatling gun?
@nimasala87647 жыл бұрын
How u connect them with the car wires? Do I need to use any connector or anything for it? Installing is cool but how we can connect them with the car wires? Also where should I connect to?Cheers mate
@Kyezie1316 жыл бұрын
That's exactly what I want to know. Anyone can fucking slap a halo on a piece of plastic lmao. I want to know wiring.
@mcficodjfico59446 жыл бұрын
just connect on position lamp wires
@mattyearwood34905 жыл бұрын
@@Kyezie131 you can either solder it directly to the wiring harness or you can solder in a pigtail connector. The latter is the better option as it will allow you to remove the headlight assembly without having to cut and resolder. If your asking how to wire them in it depends of when you want to halos illuminated. So if you want to run them with your drls then you would locate the positive and negative ( some dont have negative wires) then splice into the power wire and solder the halo into the exsisting circuit. You will end up with a Y power in one way and out 2. If you have a negative wire you do the same if not you can ground it anywhere on the body of the car. Let me know if theres anything you don't understand.
@lilblingking14915 жыл бұрын
@@mattyearwood3490 That's the problem I'm having. The profile prisms on the site say it's plug & play, and I also don't know how to solder, so I may need to get these professionally installed 😩
@mattyearwood34905 жыл бұрын
@@lilblingking1491 soldering is very easy, I can give you a quick walkthrough if you like. A soldering iron isn't even really required for wires this size. A multimeter would be useful to determine which wire supplies 12v but also not needed.
@NeoJSsk6 жыл бұрын
where to connect the electric wire to ?
@ghost_rezin92918 жыл бұрын
What size do I need for 08 lancer headlights? Looking to do the low beams, possibly the highs as well. Any info?!
@Mracekk3 жыл бұрын
how big are these circles needed? For golf 5. Thank you very much for your answer
@RetrofitSource2 жыл бұрын
Reach out to our CS team for this info! Support@theretrofitsource.com
@moreau2127 жыл бұрын
I'm looking to install those on my g37 but I don't like how they look when they are not turned on, all yellow and shit. is there a way to change that without affecting the led bulbs on the strip. make the strip gray or white?
@bk2les9 жыл бұрын
Does anyone happen to know what's the size of the stock halo that come with spec d lights?
@RetrofitSource9 жыл бұрын
Jayy023 - you would want to use an 80mm for those around the projector
@bk2les9 жыл бұрын
TheRetrofitSource Inc Okay thank you very much.
@jeffreymac49156 жыл бұрын
Jayy023 did you end up using 80mm halo? I measured 90mm on my halo lights.
@ItsJosh7 жыл бұрын
For the 80mm for use on the S20 shrouds can you drill a bigger hole in the front to run the halo power wires through the inside of the shroud?
@garywinthorpe60875 жыл бұрын
How and what do I measure to determine what size halo I need?????
@RetrofitSource5 жыл бұрын
What kind of car do you have Gary? You would just measure the diameter of the surface area surrounding your projector to determine it, in millimeters
@garywinthorpe60875 жыл бұрын
TheRetrofitSource Inc 07 Camry
@sonidodannyboy8 жыл бұрын
Would this also work with switch back led strips ? Or is there another way of doing this
@caddy-daddychannel93498 жыл бұрын
Can you please show me how to put them on my 2016 Jeep Wrangler sport
@TheKingOfHalo7 жыл бұрын
Why not buy the led headlights that come with rgb halos already installed? I see them on Amazon all the time and I've seen a few jeeps in my area with them.
@Hennysgarage7 жыл бұрын
TheKing0fHalo they're 140 dollars vs these being 40
@A_Class2165 жыл бұрын
Can you mount them using a 2 part appoxy?
@NowhereSixx666 жыл бұрын
How do you get the evil eye look
@trigun9895 жыл бұрын
Anyone know if fishing line would hold up vs wire?
@shawnstar57486 жыл бұрын
Can Angel eyes be installed on any vehicle
@RetrofitSource6 жыл бұрын
They sure can! www.theretrofitsource.com
@GhostNinjaObito Жыл бұрын
So how would I know what size halos to put on my car ? I have a 2017 Nissan altima
@RetrofitSource Жыл бұрын
Shoot us an email, we can help you find what size you need! Support@theretrofitsource.com
@Bwallace7218 жыл бұрын
what size halo would i need to fit my 2016 wrx?
@anzspy58 жыл бұрын
go to your local guitar store and ask for gauge 8(thinnest guitar string) cost no more than $1-$2 .
@ItzCroix7 жыл бұрын
Better to use fishing line its clear
@1tokeover6 жыл бұрын
Will it degrade though unlike the metal line?
@nicholassanjayowo89555 жыл бұрын
@@1tokeover I mean if it is in a sealed housing it should be fine.
@TrashxXxpanda5 жыл бұрын
What size halos for an 07 350z? Was told 80mm initially
@Fifthcell3 жыл бұрын
What about if I have a diffuser to go on top over the actual halo? Would I just do the same but over top the diffuser? I feel like that would a little more noticeable
@RetrofitSource2 жыл бұрын
You could do that!
@iceman1st18 жыл бұрын
hi iv bought a pair of projectors and h1 led bulbs, but instead of using the harness and ballast, I just wanted the projectors and leds and using the stock wiring and then have dual high and low beams. If I joined the high beam wire to the low beam bulb and turned my highs on, would it make my low beam bulb the highs as well. Hopefully u someone will understand what I'm trying to say lol
@leahroberts91362 жыл бұрын
Do you know what size halos would I need for a 2009 pre facelift fiesta
@RetrofitSource2 жыл бұрын
Reach out to our CS team, they have some halo sizes already in a list. This may be one of them! 404-220-7940 Support@TheRetrofitSource.com
@bone4767 жыл бұрын
My first time trying to install one of these. Question: when I install these, can I make them turn on or off along with the demon eyes anytime I want while driving? And when I apply the e brake I only want the angle eyes or demon eyes on. Is that possible? And how do I do that? I have a 13 wrx if that would help
@zurichizzz5 жыл бұрын
WRX CREED it would need to re map the lighting in the ecu of your vehicles. Usually angel eyes on along with the small lights, or within the small lights sockets
@briangarcia30086 жыл бұрын
Hi, for the amber functionality you would tap into the tire signal wire. The one that’s not the black one right?
@RetrofitSource6 жыл бұрын
Yes for the turn signal you would tap the orange wire into the + turn signal wire on your car. These halos do not have the turn signal function though, so that wire is not present in this video.
@CarlosGarcia-zb9xo2 жыл бұрын
What's side are those halo rings
@RetrofitSource2 жыл бұрын
Reach out to our CS team for halo sizing! 404-220-7940 Support@TheRetrofitSource.com
@BULL3608 жыл бұрын
Hey dude need help with halo lights with remote
@ashcarey51928 жыл бұрын
do you guys stock the sizes for e46 pre facelift and non projector if from the UK and very impressed and interested in purchasing some
@mattkossoff58418 жыл бұрын
+Ashley Carey Unfortunately we dont have an E46 specific size, sorry Ashley!
@anirudhaguha95658 жыл бұрын
Hello guyz, is that the apollo 2.0 flat shroud?
@theretrofitsourceinc63468 жыл бұрын
+Anirudha Guha indeed it is
@anirudhaguha95658 жыл бұрын
+The Retrofit Source Inc and the xb halo led size?
@jsvm103013 жыл бұрын
When you opt for the halo with the marimoto kit, does the halo come installed or does the customer have to install it?
@RetrofitSource3 жыл бұрын
You would have to install it.
@LagunaLeonhart2 жыл бұрын
What's wrong with using some e6000?
@RetrofitSource2 жыл бұрын
This is what we prefer! (:
@user-nk4rw1yw8t4 жыл бұрын
Will they work if I cut them a little shorter? They didn't really fit in my headlights
@RetrofitSource4 жыл бұрын
Hey Blaze, Some LED strips and halos can be modified and others can't. Reach out to our support team via phone or email with your specific product and they'll be able to help you out.
@georgemanzur67895 жыл бұрын
is there a switch that shows the ring LED light and then the headlights come on or is that the night headlight that comes on?
@RetrofitSource5 жыл бұрын
Are you asking if you can make the halo turn on separately from the rest of the headlight?
@georgemanzur67895 жыл бұрын
Yes because you can't see at night with the red halo only can you?
@seangowan74414 жыл бұрын
I have a 2018 Chevy Malibu. What size halos ring do I need?
@RetrofitSource4 жыл бұрын
We don't have that vehicles halo size on file unfortunately. The easiest way to figure out would be to measure the diameter of your factory projector shroud!
@sayhimali63846 жыл бұрын
what is the size of the projector shroud used in this tutorial and what size halo ring did you use, having problems finding the right size to do mine, it's a 2.5" projector kit
@RetrofitSource6 жыл бұрын
Thats an Apollo 2.0 flat, with an 80mm halo kit on the front: www.theretrofitsource.com/projector-kits/projector-shrouds.html
@Crx0185 жыл бұрын
If the halos touch the lens , wouldn't the lens get to hot and melt the rings ?
@bigdog850005 жыл бұрын
theyre led...
@soratheweilder1015 жыл бұрын
Is the halo the headlight or just part of it. Do I need a whole new headlight I’m so confused
@RetrofitSource5 жыл бұрын
Its just part of it - the halo is the ring being mounted to the chrome part of the headlight in the video. Its a universal add-on for most all headlights really
@soratheweilder1015 жыл бұрын
TheRetrofitSource Inc In a few days, I’ll have a 2014 Si. if i want a halo along with the morimoto xbt, would i have to get a whole new set of headlights, or what? Would I have to buy just the halo part and the xbt? i know you’re not a q&a board, but I’m 100% dumb when it comes to anything not tuning
@blondiexox3 жыл бұрын
this prob wont work for a 2020 honda civic ex sedan would it?
@RetrofitSource3 жыл бұрын
Unforutantly not.
@blondiexox3 жыл бұрын
@@RetrofitSource yeah I didn’t think so. Thanks for letting me know! Just gonna have to fish out money for customs but I know it will be worth it in the end 😋
@Krunari6 жыл бұрын
But how do you hide the power cable?
@RetrofitSource6 жыл бұрын
Drill a small hole under the halo, de-pin the JST connector, pass the wires through the inside of the shroud, and re-install the connector.
@jeffreymac49156 жыл бұрын
Would I need resistors for these small halos?
@RetrofitSource6 жыл бұрын
Yes, all LED halos need LED Drivers (resistors)
@doled61264 жыл бұрын
TheRetrofitSource Inc What resistor do I need?
@ashcarey51928 жыл бұрын
I forgot to mention they must be the xsb ones switchback
@heroe52378 жыл бұрын
what size halo ring should i get for my depo headlight for my evo x?
@luciid.99911 ай бұрын
can’t you just use glue to hold it in place ?
@RetrofitSource11 ай бұрын
You could, but JB Weld would be better. Glue might wear out overtime due to the heat in the headlight, and you don't want your halos hanging around.
@anirudhaguha95658 жыл бұрын
xb halo led size?
@theretrofitsourceinc63468 жыл бұрын
+Anirudha Guha this is an 80mm, but there are many various sizes available!
@TheKingOfHalo7 жыл бұрын
What size halo should I order for the mini gatling gun? From what I've seen it's 70 mm but those were posts from 2013, so I'm not sure.
@TheKingOfHalo7 жыл бұрын
TRS says 70mm for the mini gatling shroud for anyone else wondering.
@victorsilva19704 жыл бұрын
I put the Angel Eyes on my alpha 159, but the CCFL interfere with the front parking sensors do you know how to solve this?
@RetrofitSource4 жыл бұрын
Those systems can be so picky, They can be very touchy and unfortunately there isn’t a real fix for it other than repositioning the angel eyes.
@jaredgarcia5635 жыл бұрын
I have a 94 sentra can u custom them?
@RetrofitSource2 жыл бұрын
We don't build custom lights in house. Sorry!
@cruzevideos96056 жыл бұрын
Better off going to your local grocery store and getting those little bag tie things and rip the paper of them
@GETNYCEAUTO6 жыл бұрын
Cruze Videos definatly dont wanna do that unless u wanna see a fire happen from the LED CHip resistors and metal from that Tie touching🤦🤦🤦
@fidelcordova93745 жыл бұрын
Can I use a hot glue gun
@RetrofitSource5 жыл бұрын
No that would't be a good move. we have several better adhesive alternatives on our website.