How To: Install New Brake Pads and Rotors

[@oreillyautoparts]

Supplies Needed for This Job: 1. Safety Glasses: urlzs.com/hbwc 2. Gloves: bit.ly/2GvfwAm 3. Brake Rotors: bit.ly/2XNYtzd 4. Brake Pads: bit.ly/2ZAW78J 5. Brake Hardware: bit.ly/2L6xGNm 6. Brake Cleaner: bit.ly/2W7Vx0b 7. Jack: bit.ly/2ZxQiJl 8. Jack Stands: bit.ly/2L1YEp9 9. Flathead Screwdriver: bit.ly/2ZCADZ5 10. Breaker Bar: bit.ly/2UWfies 11. Caliper Hanger Tool: bit.ly/2IZyP6K 12. Socket Set: bit.ly/2PxQqnf 13. Thread Locker: bit.ly/2UYhr9r 14. Shop Towels: bit.ly/2GDgwm1 15. Caliper Piston Tool: bit.ly/2XNZPtN 16. One-Man Bleeder Tool: bit.ly/2XQx9Rf 17. Wire Brush: bit.ly/2GLDsjj 18. Synthetic Caliper Brush: bit.ly/2ILkeMF

[@asterteklemariam2608]

mip76

[@jennifershentrich4039]

MY 94 CHEROKEE JUST PASSED 300,000 MILES. I AM READYING MYSELF TO REPLACE AND REPAIR THE BRAKES. THE ENGINE HAS BEEN REBUIL. AS MOST OTHER PARTS I HAVE REPLACED ON THE VEHICLE SO FAR ARE ORIGINAL, I AM GUESSING THAT THE BRAKES ARE LIKEWISE SO . I APPRECIATE YOUR LIST OF ITEMS NEEDED TO COMPLETE THIS JOB AS THIS IS MY FIRST TIME. I HAVE NOT FOUND ANY OTHER VIDEO THAT HAS GIVEN SUCH A COMPLETE LIST. THANK YOU ! HI

[@LarsLiveLaughLove]

This helps although it is a general guide only! You need: brake pads + brake lubricant grease packet (supposed to come with the pads), brake pads compressor tool, a Walmart 100-piece automotive tool kit, an automotive lift, and about 2 hours. Completed the pads replacement on a Lexus IS250 on an afternoon after work today. This video helps explain how! Autozone/O’Reilly Auto/Walmart parts and tools are enough to do the job. Saved myself a total of $400!! Was quoted $550 and completed the brake pads install for the $50 pads +100 in tools I can use again. Anyone who has the prior experience of having done 2 clutches, should EASILY be capable of doing some brake pads!

[@jakelandin]

I still don't know how to change my brakes.... 😂🤣😂🤣😂🤣

[@scratchoffkinggetmoney9557]

U Slow Slow 😂😂😂😂

[@garththomas9896]

They ain’t that hard dude😂

[@inighwizard1018]

bro fr my brakes went completely out on me today

[@tiosilvia2370]

😅😅😅😂

[@ADashnawMKIBC]

😂😂😂😂

[@alecgordon2592]

Pro tip: Bad idea to put grease where the pads slide. This will collect dirt, brake dust and other debris. Once that occurs the brake pads will not properly slide as intended or potentially freeze in place depending on design. If the engineers/manufacturers believed it needed it, it would have been there right out of the factory!! Also attempt to depress piston without opening bleeder. If it fails to retract you can use the bleeder to help diagnose a hydraulic fault (open bleeder + piston now retracts = brake hose needs replaced; open bleeder + Piston still does not retract = failed caliper) Last, vacuum hose + water/soda bottle will make a nice mess free bleed container. Still need two people to bleed, but it will save you time cleaning brake fluid off concrete.

[@jennifershentrich4039]

I APPRECIATE THE INFORMATION REGARDING THE LIFTING AND SUPPORTING OF MY VEHICLE

[@f688xt6]

Hmm... More of these videos would be helpful.

[@L0rdofn0thing]

Check out Chrisfix

[@clintjacops958]

Amazing Ad!

[@sl4983]

They're all "ads". I mean all vids on YT.

[@nafibillah3133]

Do I only need some socket wrenches and that’s all and impact wrench 🔧 or do I need more tools to replace the rotor and brake pad. I want too be sure

[@MyRcGoSlow]

5:02 thanks for the info

[@neshawnbarney6584]

😂😂😂 TIME TO GET MINES FIXED 🤦🏽‍♂️🤦🏽‍♂️🤦🏽‍♂️

[@sl4983]

Love your videos. Rang the bell.

[@tinareanaevans814]

Thank you. I always shop Oreillys

[@naiyalexic]

Excellent video. *Question:* I saw you mark the alignment of the rotor and hub using a black marker to realign them upon reinstall. A new rotor was installed, without the black mark on it, so there is some discontinuity here with respect to how to align the rotor---or does it matter with a new one? How would one know how to line up a new rotor? Thanks!

[@BrilliantDesignOnline]

When installing a new rotor, it should be very evenly machined, so it should not matter.

[@ajsdiyprojects7391]

Just in case you want a clear understanding of Brakes pads and rotors kzbin.info/www/bejne/iKjPeWOvr9SNhNk

[@stevemorgan3909]

And you opened the bleeder for what reason? You are inviting problems with getting air into the caliper or brake line, just push the fluid back into the reservoir that's it.

[@Dan-md3hr]

So it doesn't screw up the abs

[@marcanthony9659]

@@Dan-md3hr isn't there a switch for mechanics to use that is used to not damage the calipers and causing a lot of pressure in brake servo (not sure if it affect abs mod/pump, also don't know if it was clear in what I was tryna convey, I heard it a while back, it was put on newer cars to make mechanic work easier

[@hildamartinez7780]

Thanks...

[@jefrey5578]

How come the guy torquing the lug nuts is using a "Pittsburg brand" torque wrench? I never knew O'Reilly used HF tools.

[@ottallman]

Because they work good

[@Rio-by1eh]

3x times to firestone , had my caliper hanging off after a full kit rotor and pads replaced, had to stop on the highway after hearing the caliper clanking**...the bold was never secured -caliper... Same problem again, after their check, assurance all os okey... now the pad is baked on to rotor...a lesson learned ...don’t trust FRSTNE

[@johnmanrow2667]

There are three places I have learned not to trust. Firestone, Jiffy Lube, and Meineke. I am speaking from my personal experience, and friends' experiences.

[@syllinx1]

Why do I never see people talk about 'drag reduction clips'?

[@shawnhickman1412]

That seems like a lot of extra steps that really aren’t needed and just makes it more complicated

[@anthonylockington5893]

Say you don’t know how to install brakes, without saying you don’t know how to install brakes.

[@sherigarcia5769]

If the rotator is thinning out does it sound like it’s grinding

[@lilsmallz1561]

Yes you can hear it when you break

[@GJ-is6sv]

What pads & rotors (F&R) would you recommend for a 2012 F-150,Lariat 4x4 5.0 8cyl?

[@ADashnawMKIBC]

You can call the store and ask them

[@jaimepalafox8020]

Yes they did that to me but I found out what it is the soulution the brake line neeed to be bigger then put a separator in the end hose and the liquid is not meant for 100 degrees so we need to change the liquid weight or velocity but that will fix the brake bass getting stuck or not work ok let them all know how a simple solution will fix that problem thanks

[@jaimepalafox8020]

We cannot see it with the naked eye but there are air bubbles that they can squeeze and it makes a system clogged or flow since the liquid is not made for air or pushing so that’s issue will fix that problem let all car manufacturers know to make a new system and brake fluid ok thanks.

[@r4lara]

Hmm, yeah I should hire someone

[@crazedgoldminner7384]

I need a Oriole filter the other day for a Honda car and ended up paying $13 at O'Reilly for I never felt more ripped off in my life

[@alihagan0]

Do i neto sand the finish off the rotor if it has one?

[@luissuarez2707]

What if I don’t have the money to change it?.. I need help..

[@ADashnawMKIBC]

Then you're sol lol

[@garrettferguson1560]

Why do you hang the caliper with wire?

[@bradlee9184]

So that the caliper doesn't hang on the break line. Which could damage it

[@shawnhickman1412]

This was a nice instructional video but telling them to replace boots and things that never get old is kinda disingenuous. Knowing their just gonna buy a lot of that stuff from you guys.

[@hugohernandez7953]

U dont need a tool to push the piston.... i do that with hands

[@thomassurdi1]

Hercules! Hercules!

[@user-uf8xi2pn4d]

Cuánto. Cuestan.

[@youtubecommenter1000]

Wow I have the same car lol

[@crazedgoldminner7384]

I spend about $3,000 a month in automotive parts fit because O'Reilly parts of gotten so expensive I've had to go order most amount Amazon and real week for sometimes unbelievable savings how about a throttle positioning sensor $80 at O'Reilly's only $27 on Amazon for the same brand I have to wait a week O'Reilly's pricing themselves out of business

[@stevensmith1057]

Thank you. Oh Oh Oh Ohreilley. Auto Parts.

[@rkgaustin9043]

How do I repair my brakes after this? kzbin.info/www/bejne/ioHJZaStqddrfNU

[@ItsMeLele]

FIRST

[@jpritch2]

"never use brake cleaner on a painted hat"??? huh?

[@nelli1022]

f

[@rocky3061]

@@richiet.northeastlos4803 what a creep bag 😭

[@richiet.northeastlos4803]

@@rocky3061 shut up bitch

[@jaxalexander5837]

Or redneck it with set of channel locks to depress the boot and do the rest of this easily🤓