How to: Install PTO Kit on SPLIT-FIRE Log Splitter

Split-Fire PTO Installation video!
For more information visit: split-fire.com/

[@danyoder2988]

Nice unit but why do you have such a half ass pump mount with out a lock on the pro shaft and holding it on with a bungee cord. That’s a joke

[@flyf100]

Great splitter. Horrible design on the pump attachment. The PTO needs a slip lock. Using a bungee to hold a pot pump on seems like a poor solution

[@OldCanuck1867]

Looks like a good setup. I agree with the other comments about the pto pump attachment. My comment is this. Obviously the demo tractor doesn't have a dead man switch under the seat. What about overcoming that?

[@SplitFireSalesInc]

Depending on your tractor, you should be able to tilt the seat forward. That will engage another switch to overcome the dead man switch. I can look into it if you provide me with your tractor model.

[@ethandesilets5351]

What is the cycle time at 540 RPM? A couple of videos avoid that spec / detail.

[@SplitFireSalesInc]

Hey Ethan! The flow is very similar to a self contained machine, at 11 gpm for both pumps. (3000 series machines)

[@roysmith9273]

What's the gpm of the pump at 3000 rpm?

[@SplitFireSalesInc]

Hi Roy, Do you mean 3000 engine rpm? Usually that would be close to 540 PTO rpm. The pump would produce 11 gpm.

[@roysmith9273]

@@SplitFireSalesInc Yes, engine rpm. After I asked the question, I listened further in the video and caught the 11 gpm. Thanks!