How To Install Ram 1500 Angel Eye Halos

  Рет қаралды 49,117

Diode Dynamics

Diode Dynamics

Күн бұрын

Пікірлер: 46
@kata2314
@kata2314 8 жыл бұрын
will this apply to a 2016 ram 1500, it is the same headlight, except they have a plug at the bottom for the wires and headlights.
@raymocandler
@raymocandler 4 жыл бұрын
Is there a safe way to clean the chrome? My headlight has a bunch of condensation inside, so I plan on baking it open. I think there might be water spots left on the chrome.
@diodedynamics
@diodedynamics 4 жыл бұрын
You should be able to use a microfiber and some water to remove the water spots!
@raymocandler
@raymocandler 4 жыл бұрын
@@diodedynamics thank you!
@treypiraino1691
@treypiraino1691 8 жыл бұрын
Canadian Tire has like 10 different kinds of silicone adhesives from Permatex and JB and a bunch of other brands. Is there a specific one you guys use?
@diodedynamics
@diodedynamics 8 жыл бұрын
+Trey Piraino We recommend JB Weld, but any epoxy should work. If you have any other questions, feel free to contact us!
@treypiraino1691
@treypiraino1691 8 жыл бұрын
Do you guys make LED replacement bulbs for Ford F-150 models earlier than 1997? I have a 1987 Ford F-150 XLT Lariat with factory incandescent headlights, tail lights, turn signals and reverse lights that I'd like to convert to LED. I wanna keep that factory look though. I don't wanna get aftermarket headlamps and tail lamps.
@diodedynamics
@diodedynamics 8 жыл бұрын
+Trey Piraino Thanks for reaching out! Shoot us an email at contact@diodedynamics.com, and we'll be happy to help you find the right bulbs for your F-150!
@JeromeAz57
@JeromeAz57 8 жыл бұрын
Do you guys have a light for the rectangle next to the halo? I've seen those and would like that too. Just want to do it all at once so I don't have to take them apart again.
@diodedynamics
@diodedynamics 8 жыл бұрын
+JeromeAz57 Check out the link below for our Front Turn Signal LEDs for the Ram 1500! www.diodedynamics.com/store/led-bulbs/listed-by-vehicle/dodge/ram-trucks-link/ram-1500/1994-1997-dodge-ram-front-turn-signal-leds-pair
@JeromeAz57
@JeromeAz57 8 жыл бұрын
Not the turn signal. The rectangle right next to the halo. It would have to be glued on just like the halo is.
@diodedynamics
@diodedynamics 8 жыл бұрын
+JeromeAz57 We apoloogize for the confusion! Check out the link below for our Ram Switchback Halos. This kit includes the two application-specific Halo rings, two C-Bar Halos, two Dual-Output drivers, and two wire pigtails with T-tap connectors. If you have any other questions, just let us know! www.diodedynamics.com/store/catalog/product/view/id/23699/s/2013-2016-dodge-ram-switchback-led-halos/category/1451/
@JeromeAz57
@JeromeAz57 8 жыл бұрын
That's the one! Thanks!
@ByBrisky
@ByBrisky 8 жыл бұрын
i love your guys products. i understand how to put the angel eyes in the vehicle but could you guy do a full wiring video from once there installed through the drivers through the battery and to remote receiver. im sure it very simple to wire, but could you guys create the video
@diodedynamics
@diodedynamics 8 жыл бұрын
+ByBrisky Thank you for your support! Next time we have a Ram 1500 in our testing garage we will be sure to shoot more videos. In the meantime, feel free to give us a call at 314-205-3033 Monday-Friday 9 a.m.- 5 p.m. CST, or shoot us an email at contact@diodedynamics.com, and we can give you more detailed wiring instructions.
@OPTICHROME
@OPTICHROME 9 жыл бұрын
Hello, we were unable to open, not off, after 20 minutes in the oven glue does not soften, any suggestions? Thanks, sorry the English "Google Translator"
@diodedynamics
@diodedynamics 9 жыл бұрын
+OPTICHROME, we recommend just like we had done in the video 265 Fahrenheit for 20 minutes, which may require a few cycles in the oven (heat, work the glue with a screwdriver, back in the oven, etc).
@insanecracker04
@insanecracker04 6 жыл бұрын
whenever you are resealing the headlight do you just let it air dry or does it need to be baked again to seal it?
@diodedynamics
@diodedynamics 6 жыл бұрын
+insanecracker04 This depends on the headlight and type of sealant used, but generally, the sealant will need to be heated up again to reseal the headlight. Check out the video at the link below for a good tutorial! kzbin.info/www/bejne/bXnFp2d4pNt3jKM
@cougarforsythe431
@cougarforsythe431 4 жыл бұрын
Do you have a headlight with black housing Avalible for Dodge Ram?
@diodedynamics
@diodedynamics 4 жыл бұрын
Unfortunately, we do not offer full headlight housing replacements at this time. However, this is something we may look into in the future!
@jessegranados909
@jessegranados909 5 жыл бұрын
What is the purpose of the Halo? Is it supposed to be like a DRL? If so will it always be on?
@diodedynamics
@diodedynamics 5 жыл бұрын
Hi Jesse! These halos are designed to serve as an accent light. And depending on how you wire them, they can remain on at all times!
@kona631
@kona631 10 жыл бұрын
So question what's the actual measurement for the angel eye in mm?
@diodedynamics
@diodedynamics 10 жыл бұрын
Hello! We actually have a kit for the Ram where you don't need to do any measuring. Attached below I have a link to that kit. www.diodedynamics.com/store/led-bulbs/angel-eyes/dodge/ram-1500/2013-ram-1500-angel-eye-kit
@joaquinvelasquez6232
@joaquinvelasquez6232 8 жыл бұрын
Diode Dynamics do you guys trust the jbweld method instead of the wires?
@jakeharper6557
@jakeharper6557 5 жыл бұрын
Diode Dynamics that link does not work..... what size is needed? And do you make an amber only option?
@brandonmaldonado21
@brandonmaldonado21 9 жыл бұрын
Do you bake the headlights with the wires inside
@diodedynamics
@diodedynamics 9 жыл бұрын
+Brandon maldonado, yes, once the angel eye halos are installed, you bake the headlamp to reseal it. The wires are designed to withstand the heat from resealing it. If you have any other questions, feel free to contact us!
@seangowan7441
@seangowan7441 4 жыл бұрын
I have a 2018 Chevy Malibu. What size Angel Eye Halo do I need?
@diodedynamics
@diodedynamics 4 жыл бұрын
Hi Sean! We would recommend sourcing the diameter of your projector! From there, we can recommend a halo size that will fit!
@seangowan7441
@seangowan7441 4 жыл бұрын
@@diodedynamics how do I find out what size projector.
@lowdownlogan1453
@lowdownlogan1453 4 жыл бұрын
What size are the halo rings for that style headlight?
@diodedynamics
@diodedynamics 4 жыл бұрын
Hi there! You can check them out below! www.diodedynamics.com/hd-led-halos-for-2013-2015-ram-1500-inner-pair.html
@ByBrisky
@ByBrisky 8 жыл бұрын
i have a 2016 dodge cummins with these headlights. do you know if this will void the warrenty
@diodedynamics
@diodedynamics 8 жыл бұрын
+ByBrisky Yes, opening up the headlight is required for installation, which would void your warranty. Whenever installations of our products require opening up the headlight, we recommend installation by one of our Authorized Installers so that there will be no issues with separating, resealing, condensation, etc. Check out the link below to find an Installer near you! www.diodedynamics.com/store/index.php/find-dealers/
@changchung
@changchung 6 жыл бұрын
Hi. What is the size of the halos? My projectors are around 9cm. Your fit? Thanks
@diodedynamics
@diodedynamics 6 жыл бұрын
Hi there! We now offer a custom-designed halo specifically for this housing! You can check it out here: www.diodedynamics.com/2013-2016-dodge-ram-switchback-led-halos.html
@christopherwilliam4883
@christopherwilliam4883 7 жыл бұрын
Only suggestion I have is to pull the light out after 13 minuets work at it put it in again for 5 minuets here and there to work at it again to remove lens. I preheated my oven to 250 and set the headlight on a flat trey and the light wasn’t touching anything perfectly centered and cooked it for exactly 20 minuets, melted the shit outta my head light. 🤨
@MrAlexanderP3
@MrAlexanderP3 8 жыл бұрын
what type of LED are those?
@diodedynamics
@diodedynamics 8 жыл бұрын
+Aleksander Poposki, for that product, we use standard 5050 LED chips. If you have any other questions, just let us know!
@MRP78
@MRP78 9 жыл бұрын
Mmmmmm...looks good!
@hgklown2495
@hgklown2495 8 жыл бұрын
Good video
@cedericjeffries1426
@cedericjeffries1426 7 жыл бұрын
I got frustrated just by looking at the video.....imagine if I actually tried it myself 😄
@diodedynamics
@diodedynamics 7 жыл бұрын
+Cederic Jeffries Since opening up the headlights is required for installation, we recommend professional installation by one one of our Authoirzed Dealers/Installers. Check out the link below to find one near you! www.diodedynamics.com/store/index.php/find-dealers/
@cedericjeffries1426
@cedericjeffries1426 7 жыл бұрын
Ok will do
Top 5 Easiest Mods For Your 2009-2018 Dodge RAM - The Haul
10:29
AmericanTrucks Ram
Рет қаралды 672 М.
Top 5 Problems Ram Truck 1500 4th Generation 2009-17
9:17
1A Auto: Repair Tips & Secrets Only Mechanics Know
Рет қаралды 1,9 МЛН
Непосредственно Каха: сумка
0:53
К-Media
Рет қаралды 12 МЛН
How to have fun with a child 🤣 Food wrap frame! #shorts
0:21
BadaBOOM!
Рет қаралды 17 МЛН
«Жат бауыр» телехикаясы І 26-бөлім
52:18
Qazaqstan TV / Қазақстан Ұлттық Арнасы
Рет қаралды 434 М.
Is the Chevy 2500 Overkill for OFFGRID Adventure?
5:56
Big Dog Builds
Рет қаралды 17
Ram Speaker Upgrade
18:02
Classic Octane
Рет қаралды 153 М.
Tracking Device Found on My RAM!
10:59
FAB Automotive Detailing
Рет қаралды 2,9 МЛН
How To Open RAM TRUCK HEADLIGHTS
11:25
FlyRyde
Рет қаралды 25 М.
How to INSTALL LED Bed Rail Lighting on Your Truck - DIY - DODGE RAM
23:13
BoostedMotorsports
Рет қаралды 209 М.
How to install HID or LED Bulbs in your 09-16 Dodge Ram Fog Lights
20:39
Headlight Revolution
Рет қаралды 74 М.
Непосредственно Каха: сумка
0:53
К-Media
Рет қаралды 12 МЛН