How To Install Rear Sway Bar and End Links | B7 Audi A4

Thanks for watching! Hopefully this video helped you with the installation of your 034 Motorsports / Aftermarket rear sway bar and end links onto your b7 audi A4 (2005.5, 2006, 2007, 2008). If you have any questions about this DIY tutorial, please leave them in the comment section!
PART LINKS:
Sway Bar - click.linksynergy.com/deeplin...
End Links - click.linksynergy.com/deeplin...
ROYALTY FREE MUSIC:
ArgoFox
Safety Disclaimer: This is an instructional video. In no way is Modern Engineer or its associates responsible for any damage or personal injury that may occur while following this tutorial.
Affiliate Marketing Disclosure: The owner(s) of this channel may receive compensation from the companies whose products are linked in the description of Modern Engineer videos. The opinions and / or statements of the owner(s) and / or featured personnel are not influenced or biased based on compensation. All compensation is derived via affiliate marketing through a third party marketing agency.
#Audi #B7A4 #SwayBar

[@ajnanyc]

The 034 instructions call for the vehicle to be lowered onto the ground to compress the suspension before tightening end links and sway bar. I didn't see you guys do this?

[@ModernEngineer]

Yep. Our mistake.

[@AccessGranted95]

Just got a parted out S4 rear sway bar, have t right here in my room, gonna put mine of jack stands, drop my exhaust, then do mine. Also have ordered a new fuel filter (accidentally ordered an incorrect one at first [2 Inlet, 1 outlet.. but needed 2 on either side] so I will do that too once the cars in the air.

[@gnarshread]

Nice video guys!

[@AccessGranted95]

I wonder how much of an improvement the larger end links offer versus the stock ones. If you keep in mind making the 034 links the same height/size/whatever as the stock ones.

[@V_Litty]

How good are those braided brake lines over the OEM? Thinking about a cheap way to stiffen the brake pedal feel

[@paulbreaux909]

What would adjusting the height of the sway bar do? Raise rear end? Stiffen ride? Thanks.

[@BonerFidePodcasts]

Heck Yeah!

[@Slap0]

Do you think the dust covers on the endlink really help? I order some with cover but ending running them for a month before car was totaled. Now I have another A4 and will be running the same set up. Again should I order replacement covers due to losing to the storage bin?

[@ModernEngineer]

If it were me, I would invest in the dust boots to avoid contaminating the ball joints, but they probably aren't a necessity.

[@Kinzorallah]

Madtown shirt spotted!

[@2legit2quit9]

how was the ride difference? Really noticeable or can you only tell under heavy cornering? Also I noticed you did the motor mounts. What made you go with the RS4 motor mounts instead of the stock hydraulic motor mounts? Again did the motor mounts make a noticeable difference in the drive? I too have a B7 A4 2.0TFSI and I just got done doing all of the engine upgrades and am going to start pimping out the suspension.

[@AccessGranted95]

2legit2quit On my B6, I did 034 engine mounts, ECS tuning snub Mount. JOM Blueline coilovers, and just picked up a parted out S4 sway bar for my A4. And the engine mounts made a large difference. The engine felt more locked into the frame. Now I have a 034 street/sport gearbox Mount I’m going to install. I think I’m gonna wait until it’s a bit warmer and just do the sway bar and gearbox Mount all at once tbh.

[@troy_19_]

Woulda been nice to actually see how to build the end link not fast forward but ok

[@daviddawson5630]

Im look for a rear swaybar for my 03 Audi Avant. I can't find one.

[@ModernEngineer]

www.ecstuning.com/Audi-B6_A4-Quattro-1.8T/Suspension/Sway_Bar/

[@bradyaltland556]

What hole on the seat bar did you use

[@bradyaltland556]

Sway lol

[@ModernEngineer]

Don't get Personal the less stuff one lol I think the one nearest to the end

[@TheSuperboy899]

Would it be the same installation process for a C7 A6?

[@AccessGranted95]

That 034 sway bar is waaay thicker than even this S4 sway bar, idk. The stock one ik from when I did my coil overs was small as fuck. But I guess your 034 is maybe 22mm and the S4 is maybe 20mm.