HOW TO INSTALL ROCK LIGHTS: STEP BY STEP

[@JWMontoya]

HERE'S A COMPLETE HOW TO VIDEO TO HELP YA'LL INSTALL YOUR ROCKLIGHTS SHOP ROCK LIGHTS HERE: HTTPS://JWMOTORSPORTSCO.COM

[@CaptainDirty_]

Bought mine on Tuesday still waiting on them to ship, can’t wait!

[@dantsy6397]

$170 for 8 lights?!?!?!? Are you fискіиg out of your mind?

[@HalfmoonVIP]

Lol yeah I bought 30 of them on Temu for $70 they’re the same thing I swear

[@kontrollme9034]

😂💯

[@cheeseburger_5534]

@@HalfmoonVIPI would be surprised if they haven’t stopped working by now or caught on fire

[@brandonbattle2996]

I know I chick bought hers off Temu for like 45 and they're bright as hell. She's had them for 8 months with no issues

[@Passgamingyt]

Got 12 for 430 and there the brightest thing u will ever see

[@davidcrumpton4880]

How do I wire rock lights to the gm battery that has the bolts

[@Charliano700]

Would it be easier to splice the rears into the trailer light harness? So you don’t have to touch any factory wires. The front can be connected to an add a fuse for the same running light circuit.

[@claytonmccollum9692]

Could do it that way if you dont want them on a switch. Personally I'd like to be able to control when they're on or off

[@octane101productions]

Our elite installer🤣

[@Pastpigeon]

i just ground mine near the frame by the light so i only have positive wires running through the truck

[@Haydini69]

That’s what I did too. Much easier than running 2 wires

[@pablop9495]

​@@Haydini69isn't the ground wire on the switch just for the led light on the switch

[@joeharper7169]

You should google what a firewall is before you say it anymore

[@joshuawebber2662]

For real

[@Back_door_bandit_98]

I’m confused he was pointing at the firewall. The firewall is part of the automobile body that separates the engine compartment from the driver. If you watch the video he is pointing exactly at the part of the automobile that separates the driver from the engine was he not?

[@aaronabney8924]

​@Dually Life 979 the whole thing is a fire wall not just where the grommet is

[@ZacharyFernandes-y3c]

Dude I was just saying that and on this particular vehicle the firewall is in the same exact spot as every other vehicle 😂😂😂

[@MrSnookless]

Nice job! What size fuse did you use?

[@usmc6911]

LEDs are low amp draw so I went with a 15 on my install.

[@justinohsbeats]

Do you think a relay would be a good idea or ?

[@charlesbronson8680]

Nice job, Also what's that song playing in the truck at 5:28?

[@Miloboa]

my rear liner is all frame so now i’m sitting here with the front done and the rear incomplete scared i’m gonna fuck something up if i start drilling

[@cdroanmackreact]

Where can I get magnets strong enough to hold them on when going over bumps and stuff

[@wesleybrabant3595]

Yes, it looks geat. I gotta remember tape it up nice.

[@kyirhon9173]

Nice Vid Keep it up can’t wait for you’re build at daytona!! What’s the instrumental in the beginning of the vid

[@rain7096]

👍

[@cruzmuniz129]

it looks good 💯💯💯💯 Huston Tx ✌️

[@marshallsteele9153]

I have 2 LED offroad lights in my bumper could I use all that wire an toggle switch I used on the LEDS but on the Rock lights ? Its on a 2000 two wheel drive toyota Rav4

[@austinwilliams3665]

So I’m doing 24 lights, 3 in each wheel well, 2 under each door and 2 in front and back, this wiring setup should still work the same?

[@usmc6911]

Yes.I would use14 ga main wires.

[@thomasipkiss8793]

Are there any special amps that the in-line fuse needs to be?

[@JWMontoya]

We supply with proper in line with fuse

[@BRado]

Lol dude has no idea what a firewall is

[@bhkazz6029]

I just needa know the wiring

[@colinbird264]

so are all the grounds wired up to 1 ground wire or to multiple locations?

[@JWMontoya]

1 ground

[@usmc6911]

I take gounds back to battery to head off future problems.

[@lolop845]

What gauge wire do you use?

[@JWMontoya]

For these rocklights, 16 is fine

[@Carloss80k]

my battery cant hold a charge bc of my wheel lights. and im looking to install rock lights. what is the best battery options for those mods?

[@JWMontoya]

Add a secondary battery

[@usmc6911]

LEDs do not draw a lot of amps.Usually 1/10th of a incandescent bulb.Seem my post on a remote and relay install.This insures no parasitic draws.

[@donaldlord9596]

i installed my rock lights i had them on but then when i was gonna install the rest they dont work now but i checked and they come on but cant figure out how to make them work on my truck agian i cant figure out what fuse is blown cus i tryed everything any help why it isnt powering on

[@jonashaws2394]

Completely hate drilling holes in my truck

[@CuapioCreations]

you should do a squat build for fun

[@addicted49]

No

[@Cylastroy]

No

[@evanch123456]

He said butt connector haha!

[@Chefcheese774]

I wanna buy rock lights, but i feel like I will still find ways to mess up because I suck at instructions

[@JWMontoya]

Find a buddy to help you

[@Chefcheese774]

@@JWMontoya about to ask my cousin gotta rock those rock lights for daytona you think it going to look good even with a rc lift?

[@knowledge15king]

It was good video until I noticed the wire hanging across the top control arm, during your walk around.

[@weekendhomeprojects]

If I got a set of those, it'd show off my newly installed RUSTED rotors.

[@brentdavenport01]

Their example truck pictured on the web page is squatted.... -50 points. Also, the entire divider between the cabin and engine bay is the firewall, not just the pass through grommet, hence fireWALL..... 😂

[@JohnSmith-ho8sq]

What brand rock lights are those l?

[@usmc6911]

Povtor

[@miken9484]

Do you know what's the difference between the mictuning C2 rock lights and the 2nd gen rock lights?

[@wesleybrabant3595]

Put 4 more under the truck. Get rid of the shadows

[@_Machine631_]

2:15 Obsolete is a great song...just saying. haha

[@BobKnar88]

Would 18g wire be fine?

[@usmc6911]

I went 14 on long runs and 16 on short.

[@BobKnar88]

@@usmc6911 I went 18g all way round, works fine.

[@flashovr24]

You didn't ANYTHING on the actual mounting install of the lights. JUST the wiring?! WTH?

[@NETexasdragtruck]

Not bright enough for 170$

[@lolop845]

What amp fuse do you use?

[@usmc6911]

I used a 15

[@tbaca619]

Umm those are for show and not work rock lights.. they are supposed to light up where your tires are going into/out of

[@chaytonpolo7128]

💪🏽💪🏽🔥🔥

[@Riioripak]

Those are sold in temu for 4€

[@Nerfamus]

"Rock lights"

[@gabrielfajardo7144]

30,28 for 6 lights

[@joseduranjr3152]

What a waste for such a tiny light

[@usmc6911]

Bright but small

[@victoramador6374]

Pull up

[@nate.hanlon]

complete how to my ass 🤣

[@adrianb7452]

those rock lights are overpriced and they don’t even change color

[@milehighduramax3821]

Color changing lights are a dying fad. Why waste your time to talk shit. Gtfo here with that baby back bullshit.

[@adrianb7452]

Mile High DURAMAX there really not but alright but then cheap ass amazon rock lights are still way overpriced

[@oxford6.7]

color changing rock lights aren’t cool

[@screaminbanshee7832]

@@oxford6.7 who actually want color changing rock lights

[@IIThaGawdII]

@@screaminbanshee7832 me

[@Fkidd702]

My 20$ 4WDKING rock lights are brighter than both of yours 😂

[@johnnymartinez305]

website?

[@masihmoh6395]

title says step by step my assss. You guys have ridiculous pricing on your website . Diamond level rock light kit $2000 hahahaha in your dreams i can buy everything on that list including your premium rock lights 2.0😂 all under $400

[@charlescampbell4896]

How to install rock lights... don't install them. If you think rock lights are cool you probably swallow toothpaste when you brush.

[@selfmadeproductions934]

What if I like the taste of toothpaste

[@livesquirrell]

@@selfmadeproductions934 lmfao, i like toothpaste too

[@slimshady69]

@@livesquirrell I think he was kidding bud

[@justinhensley6628]

Then I guess I swallow toothpaste 😂

[@davidlabarshort6325]

I would like to bye some so I can do an in stole video on my dads Durmax @davelabar youtube

[@xviperrr1706]

What gauge wire did you use ?